別の方によるWRC-X6000QSのPRをベースとして作業を行い、大体出来上がった
完全に素のWRC-X6000GSDに最初に導入する場合、途中のU-Bootのブートメニューは表示されず、そのままブートに進む
WRC-X6000GSD login: [ 2588.876083] ubi2: attaching mtd7
[ 2588.898044] ubi2: scanning is finished
[ 2588.909607] ubi2: attached mtd7 (name "Config", size 3 MiB)
[ 2588.915180] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2588.922047] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2588.928819] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2588.935765] ubi2: good PEBs: 28, bad PEBs: 0, corrupted PEBs: 0
[ 2588.941670] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2588.948877] ubi2: max/mean erase counter: 6/2, WL threshold: 4096, image sequence number: 1006697283
[ 2588.957987] ubi2: available PEBs: 0, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4
[ 2588.967021] ubi2: background thread "ubi_bgt2d" started, PID 1347
[ 2588.969821] UBIFS (ubi2:0): Mounting in unauthenticated mode
[ 2588.978829] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1350
[ 2589.067953] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name ""Config""
[ 2589.075513] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2589.085418] UBIFS (ubi2:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
[ 2589.095398] UBIFS (ubi2:0): reserved for root: 65970 bytes (64 KiB)
[ 2589.101656] UBIFS (ubi2:0): media format: w5/r0 (latest is w5/r0), UUID 384985E4-800C-4F51-B6C3-AAC01E76E58D, small LPT model
[ 2589.349592] UBIFS (ubi2:0): un-mount UBI device 2
[ 2589.354315] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
[ 2589.363457] ubi2: detaching mtd7
[ 2589.367040] ubi2: mtd7 is detached
[ 2589.377175] ubi3: attaching mtd10
[ 2589.399123] ubi3: scanning is finished
[ 2589.410445] ubi3: attached mtd10 (name "Config_2", size 3 MiB)
[ 2589.416279] ubi3: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2589.423141] ubi3: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2589.429913] ubi3: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2589.436859] ubi3: good PEBs: 28, bad PEBs: 0, corrupted PEBs: 0
[ 2589.442763] ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2589.449969] ubi3: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 199844246
[ 2589.458992] ubi3: available PEBs: 0, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4
[ 2589.468024] ubi3: background thread "ubi_bgt3d" started, PID 1472
[ 2589.470655] UBIFS (ubi3:0): Mounting in unauthenticated mode
[ 2589.479820] UBIFS (ubi3:0): background thread "ubifs_bgt3_0" started, PID 1475
[ 2589.573928] UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name ""Config_2""
[ 2589.581663] UBIFS (ubi3:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2589.591559] UBIFS (ubi3:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
[ 2589.601541] UBIFS (ubi3:0): reserved for root: 65970 bytes (64 KiB)
[ 2589.607798] UBIFS (ubi3:0): media format: w5/r0 (latest is w5/r0), UUID 75D47E1C-D060-4770-8CA8-7911FC9A4754, small LPT model
[ 2589.845661] UBIFS (ubi3:0): un-mount UBI device 3
[ 2589.850371] UBIFS (ubi3:0): background thread "ubifs_bgt3_0" stops
[ 2589.859528] ubi3: detaching mtd10
[ 2589.863135] ubi3: mtd10 is detached
[ 2589.874577] ubi2: attaching mtd7
[ 2589.896536] ubi2: scanning is finished
[ 2589.908031] ubi2: attached mtd7 (name "Config", size 3 MiB)
[ 2589.913603] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2589.920467] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2589.927239] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2589.934185] ubi2: good PEBs: 28, bad PEBs: 0, corrupted PEBs: 0
[ 2589.940090] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2589.947297] ubi2: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 1006697283
[ 2589.956407] ubi2: available PEBs: 0, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4
[ 2589.965612] ubi2: background thread "ubi_bgt2d" started, PID 1505
[ 2589.968210] UBIFS (ubi2:0): Mounting in unauthenticated mode
[ 2589.977549] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1508
[ 2590.049810] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name ""Config""
[ 2590.057373] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2590.067272] UBIFS (ubi2:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
[ 2590.077254] UBIFS (ubi2:0): reserved for root: 65970 bytes (64 KiB)
[ 2590.083510] UBIFS (ubi2:0): media format: w5/r0 (latest is w5/r0), UUID 384985E4-800C-4F51-B6C3-AAC01E76E58D, small LPT model
[ 2590.110627] UBIFS (ubi2:0): un-mount UBI device 2
[ 2590.115356] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
[ 2590.124494] ubi2: detaching mtd7
[ 2590.127996] ubi2: mtd7 is detached
[ 2590.138272] ubi3: attaching mtd10
[ 2590.160236] ubi3: scanning is finished
[ 2590.171696] ubi3: attached mtd10 (name "Config_2", size 3 MiB)
[ 2590.177527] ubi3: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2590.184386] ubi3: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2590.191159] ubi3: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2590.198105] ubi3: good PEBs: 28, bad PEBs: 0, corrupted PEBs: 0
[ 2590.204009] ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2590.211281] ubi3: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 199844246
[ 2590.220308] ubi3: available PEBs: 0, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4
[ 2590.229339] ubi3: background thread "ubi_bgt3d" started, PID 1532
[ 2590.236036] UBIFS (ubi3:0): Mounting in unauthenticated mode
[ 2590.241762] UBIFS (ubi3:0): background thread "ubifs_bgt3_0" started, PID 1535
[ 2590.312807] UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name ""Config_2""
[ 2590.320568] UBIFS (ubi3:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2590.330483] UBIFS (ubi3:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
[ 2590.340470] UBIFS (ubi3:0): reserved for root: 65970 bytes (64 KiB)
[ 2590.346759] UBIFS (ubi3:0): media format: w5/r0 (latest is w5/r0), UUID 75D47E1C-D060-4770-8CA8-7911FC9A4754, small LPT model
[ 2590.375064] UBIFS (ubi3:0): un-mount UBI device 3
[ 2590.379851] UBIFS (ubi3:0): background thread "ubifs_bgt3_0" stops
[ 2590.389225] ubi3: detaching mtd10
[ 2590.392983] ubi3: mtd10 is detached
##############1.Update Fwheader##############
##############update_fwheader_num:[2]##############
##############MSTC_FW_CHECK##############
update ubi_2 header write /tmp/fw
##############2.Update write MSTC pesist num:[2]##############
############## MSTC persist num check:[2]##############
##############3.Update UBI FW##############
##############update_image_num:[2]##############
Watchdog handover: fd=3
- watchdog -
killall: telnetd: no process killed
killall: dropbear: no process killed
killall: ash: no process killed
Tue Apr 14 01:27:27 JST 2026 upgrade: Sending TERM to remaining processes ... sh serviceapi proxyagent fstunnel ubusd wapp wapp urngd fwup.cgi bs
20 crond dnsmasq odhcp6c odhcpd omcproxy sh sh sh login sleep sleep sleep fwdd logd rpcd syslogd klogd netifd sh busybox lighttpdlighttpd[6910]:
(../src/server.c.2097) server stopped by UID = 0 PID = 1709
avahi-daemon kidsmond blockd elc-led elc-monitor-mod elc-wps-util hanareya
Tue Apr 14 01:27:30 JST 2026 upgrade: Sending KILL to remaining processes ...
[ 2595.221121] sh (1709): drop_caches: 3
Tue Apr 14 01:27:31 JST 2026 upgrade: Switching to ramdisk...
[ 2596.221686] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
[ 2596.233779] UBIFS (ubi0:2): un-mount UBI device 0
Mon Apr 13 16:27:32 UTC 2026 upgrade: Performing system upgrade...
########MstcUpdatePartNum:[2]########
########CI_UBIPART:[ubi_2]########
#####CI_UBIPART:[ 2596.547791] ubi1: attaching mtd9
[ubi_2] mtdnum:[9]#####
[ 2596.687825] ubi1: scanning is finished
[ 2596.691572] ubi1: empty MTD device detected
[ 2596.713456] ubi1: attached mtd9 (name "ubi_2", size 50 MiB)
[ 2596.719018] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2596.725876] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2596.732645] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2596.739587] ubi1: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
[ 2596.745576] ubi1: user volume: 0, internal volumes: 1, max. volumes count: 128
[ 2596.752802] ubi1: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 3756952561
[ 2596.761912] ubi1: available PEBs: 377, total reserved PEBs: 23, PEBs reserved for bad PEB handling: 19
[ 2596.771201] ubi1: background thread "ubi_bgt1d" started, PID 2639
UBI device number 1, total 400 LEBs (50790400 bytes, 48.4 MiB), available 377 LEBs (47869952 bytes, 45.6 MiB), LEB size 126976 bytes (124.0 KiB)
Volume ID 0, size 36 LEBs (4571136 bytes, 4.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "kernel", alignment 1
Volume ID 1, size 49 LEBs (6221824 bytes, 5.9 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1
Set volume size to 37076992
Volume ID 2, size 292 LEBs (37076992 bytes, 35.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1
sysupgrade successful
sysupgrade successful
um[ 2600.605725] reboot: Restarting system
ount: can't unmo
F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 021E [010F]
Jump to BL
NOTICE: BL2: v2.6(release):6e5f77c
NOTICE: BL2: Built : 04:38:12, May 20 2022
NOTICE: WDT: disabled
NOTICE: CPU: MT7986 (1600MHz)
NOTICE: EMI: Using DDR3 settings
NOTICE: EMI: Detected DRAM size: 512MB
NOTICE: EMI: complex R/W mem test passed
NOTICE: SPI_NAND parses attributes from parameter page.
NOTICE: SPI_NAND Detected ID 0xef
NOTICE: Page size 2048, Block size 131072, size 134217728
NOTICE: Initializing NMBM ...
NOTICE: Signature found at block 1023 [0x07fe0000]
NOTICE: First info table with writecount 0 found in block 960
NOTICE: Second info table with writecount 0 found in block 963
NOTICE: NMBM has been successfully attached in read-only mode
NOTICE: BL2: Booting BL31
NOTICE: BL31: v2.6(release):6e5f77c
NOTICE: BL31: Built : 11:26:37, Sep 19 2023
U-Boot 3.0.31 (Sep 19 2023 - 11:26:07 +0800)
CPU: MediaTek MT7986
Model: mt7986-rfb
DRAM: 512 MiB
Initializing NMBM ...
spi-nand: spi_nand spi_nand@1: Winbond SPI NAND was found.
spi-nand: spi_nand spi_nand@1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
Could not find a valid device for nmbm0
Signature found at block 1023 [0x07fe0000]
First info table with writecount 0 found in block 960
Second info table with writecount 0 found in block 963
NMBM has been successfully attached
MMC: mmc@11230000: 0
Loading Environment from MTD... OK
In: serial@11002000
Out: serial@11002000
Err: serial@11002000
*** U-Boot Boot Menu ***
Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit
1. Startup system (Default)
2. Upgrade firmware
3. Upgrade ATF BL2
4. Upgrade ATF FIP
5. Upgrade single image
6. Load image
7. Upgrade ELECOM firmware
0. U-Boot console
***mstc_get_bootnum_from_persist***
Reading from 0x0 to 0x5fb34290, size 0x10 ... OK
1b 05 ce 17 02 01
bootnum:02 mstc_bootnum:02
ubi0: attaching mtd10
ubi0: scanning is finished
ubi0: attached mtd10 (name "ubi_2", size 50 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3756952561
ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 19
Reading from volume 'kernel' to 0x46000000, size 0x0 ... OK
## Loading kernel from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-6.12.80
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x460000e8
Data Size: 4478207 Bytes = 4.3 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x48000000
Entry Point: 0x48000000
Hash algo: crc32
Hash value: 1a6a068b
Hash algo: sha1
Hash value: b6b636f814f2a2566552b5b367140f53e7cad5f0
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt elecom_wrc-x6000gsd device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4644572c
Data Size: 23103 Bytes = 22.6 KiB
Architecture: AArch64
Load Address: 0x47000000
Hash algo: crc32
Hash value: 149a92fb
Hash algo: sha1
Hash value: e3eb966e04cc0ac5697a8cb017aef48ab5e540d6
Verifying Hash Integrity ... crc32+ sha1+ OK
Loading fdt from 0x4644572c to 0x47000000
Booting using the fdt blob at 0x47000000
Uncompressing Kernel Image
Loading Device Tree to 000000005f7f0000, end 000000005f7f8a3e ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.12.80 (tofu@Tofu-B450HVKU24) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.3.0 r33426+2-36a818b413) 14.3.0, GNU
ld (GNU Binutils) 2.44) #0 SMP Mon Apr 13 15:29:17 2026
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: ELECOM WRC-X6000GSD
[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004303ffff (256 KiB) nomap non-reusable secmon@43000000
[ 0.000000] OF: reserved mem: 0x000000004fc00000..0x000000004fcfffff (1024 KiB) nomap non-reusable wmcpu-reserved@4fc00000
[ 0.000000] OF: reserved mem: 0x000000004fd00000..0x000000004fd3ffff (256 KiB) nomap non-reusable wo-emi@4fd00000
[ 0.000000] OF: reserved mem: 0x000000004fd40000..0x000000004fd7ffff (256 KiB) nomap non-reusable wo-emi@4fd40000
[ 0.000000] OF: reserved mem: 0x000000004fd80000..0x000000004ffbffff (2304 KiB) nomap non-reusable wo-data@4fd80000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004303ffff]
[ 0.000000] node 0: [mem 0x0000000043040000-0x000000004fbfffff]
[ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff]
[ 0.000000] node 0: [mem 0x000000004ffc0000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 20 pages/cpu s42520 r8192 d31208 u81920
[ 0.000000] pcpu-alloc: s42520 r8192 d31208 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line:
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[ 0.000000] software IO TLB: mapped [mem 0x000000005fcc1000-0x000000005fdc1000] (1MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000079] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.000086] pid_max: default: 32768 minimum: 301
[ 0.002522] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.002530] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.004381] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.005088] rcu: Hierarchical SRCU implementation.
[ 0.005091] rcu: Max phase no-delay instances is 1000.
[ 0.005232] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.005487] smp: Bringing up secondary CPUs ...
[ 0.005784] Detected VIPT I-cache on CPU1
[ 0.005823] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.005850] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.006217] Detected VIPT I-cache on CPU2
[ 0.006241] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[ 0.006255] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.006616] Detected VIPT I-cache on CPU3
[ 0.006638] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[ 0.006650] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.006692] smp: Brought up 1 node, 4 CPUs
[ 0.006697] SMP: Total of 4 processors activated.
[ 0.006699] CPU: All CPU(s) started at EL2
[ 0.006702] CPU features: detected: 32-bit EL0 Support
[ 0.006704] CPU features: detected: CRC32 instructions
[ 0.006728] alternatives: applying system-wide alternatives
[ 0.006844] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.006979] Memory: 491304K/524288K available (9280K kernel code, 986K rwdata, 2764K rodata, 832K init, 298K bss, 30044K reserved, 0K cma-rese
rved)
[ 0.009689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.009705] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.009785] 29184 pages in range for non-PLT usage
[ 0.009787] 520704 pages in range for PLT usage
[ 0.011030] pinctrl core: initialized pinctrl subsystem
[ 0.012087] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.012354] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.012377] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.012404] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.012725] thermal_sys: Registered thermal governor 'fair_share'
[ 0.012728] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.012730] thermal_sys: Registered thermal governor 'step_wise'
[ 0.012733] thermal_sys: Registered thermal governor 'user_space'
[ 0.012760] ASID allocator initialised with 65536 entries
[ 0.013334] pstore: Using crash dump compression: deflate
[ 0.013338] pstore: Registered ramoops as persistent store backend
[ 0.013340] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.014531] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
[ 0.028298] cryptd: max_cpu_qlen set to 1000
[ 0.030101] SCSI subsystem initialized
[ 0.030189] libata version 3.00 loaded.
[ 0.031535] clocksource: Switched to clocksource arch_sys_counter
[ 0.033467] NET: Registered PF_INET protocol family
[ 0.033560] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.034524] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.034535] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.034544] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.034570] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.034667] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.034943] MPTCP token hash table entries: 512 (order: 2, 12288 bytes, linear)
[ 0.035028] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.035041] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.035205] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.035228] PCI: CLS 0 bytes, default 64
[ 0.036365] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.040516] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.040521] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.089231] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 0.090246] printk: legacy console [ttyS0] disabled
[ 0.110577] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 2500000) is a ST16650V2
[ 0.110615] printk: legacy console [ttyS0] enabled
[ 0.911070] mtk_rng 1020f000.rng: registered RNG driver
[ 0.911302] random: crng init done
[ 0.922210] loop: module loaded
[ 0.926963] spi-nand spi0.1: Winbond SPI NAND was found.
[ 0.932295] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[ 0.940921] Signature found at block 1023 [0x07fe0000]
[ 0.946059] NMBM management region starts at block 960 [0x07800000]
[ 0.953771] First info table with writecount 0 found in block 960
[ 0.964177] Second info table with writecount 0 found in block 963
[ 0.970343] NMBM has been successfully attached
[ 0.975043] 13 fixed-partitions partitions found on MTD device spi0.1
[ 0.981838] Creating 13 MTD partitions on "spi0.1":
[ 0.986707] 0x000000000000-0x000000100000 : "BL2"
[ 0.992459] 0x000000100000-0x000000180000 : "u-boot-env"
[ 0.998268] 0x000000180000-0x000000380000 : "Factory"
[ 1.005054] 0x000000380000-0x000000580000 : "FIP"
[ 1.011144] 0x000000580000-0x0000005a0000 : "Fwheader"
[ 1.016602] 0x0000005a0000-0x0000037a0000 : "firmware1"
[ 1.055403] 1 mstc-boot partitions found on MTD device firmware1
[ 1.061402] Creating 1 MTD partitions on "firmware1":
[ 1.066452] 0x000000000000-0x000003200000 : "ubi1"
[ 1.071720] 0x0000037a0000-0x000003b20000 : "Config"
[ 1.079227] 0x000003b20000-0x000003b40000 : "Fwheader_2"
[ 1.084849] 0x000003b40000-0x000006d40000 : "firmware2"
[ 1.123921] 1 mstc-boot partitions found on MTD device firmware2
[ 1.129921] Creating 1 MTD partitions on "firmware2":
[ 1.134968] 0x000000000000-0x000003200000 : "ubi"
[ 1.140003] 0x000006d40000-0x0000070c0000 : "Config_2"
[ 1.147673] 0x0000070c0000-0x0000071c0000 : "persist"
[ 1.153647] 0x0000071c0000-0x000007200000 : "Mrd"
[ 1.158744] 0x000007200000-0x000007580000 : "Backup"
[ 1.332540] Maxlinear Ethernet GPY211C mdio-bus:05: Firmware Version: 8.111 (0x886F)
[ 1.344894] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081800000, irq 120
[ 1.354727] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc081800000, irq 120
[ 1.364427] i2c_dev: i2c /dev entries driver
[ 1.370014] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 1.378507] NET: Registered PF_INET6 protocol family
[ 1.384143] Segment Routing with IPv6
[ 1.387816] In-situ OAM (IOAM) with IPv6
[ 1.391775] NET: Registered PF_PACKET protocol family
[ 1.396906] 8021q: 802.1Q VLAN Support v1.8
[ 1.467696] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
[ 1.476662] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 1.486625] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=124)
[ 1.507778] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=125)
[ 1.528609] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=126)
[ 1.549405] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=127)
[ 1.560771] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[ 1.567490] DSA: tree 0 setup
[ 1.571015] UBI: auto-attach mtd10
[ 1.574425] ubi0: default fastmap pool size: 20
[ 1.578941] ubi0: default fastmap WL pool size: 10
[ 1.583720] ubi0: attaching mtd10
[ 1.913873] ubi0: scanning is finished
[ 1.925159] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 17, need 19
[ 1.935445] ubi0: attached mtd10 (name "ubi", size 50 MiB)
[ 1.940920] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.947784] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.954558] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.961500] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
[ 1.967491] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 1.974697] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3756952561
[ 1.983811] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 17
[ 1.993023] ubi0: background thread "ubi_bgt0d" started, PID 635
[ 1.993824] block ubiblock0_1: created from ubi0:1(rootfs)
[ 2.004495] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[ 2.011517] clk: Disabling unused clocks
[ 2.015680] PM: genpd: Disabling unused power domains
[ 2.026368] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.033862] Freeing unused kernel memory: 832K
[ 2.038348] Run /sbin/init as init process
[ 2.042435] with arguments:
[ 2.045388] /sbin/init
[ 2.048080] with environment:
[ 2.051205] HOME=/
[ 2.053565] TERM=linux
[ 2.295095] init: Console is alive
[ 2.298598] init: - watchdog -
[ 2.664100] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.692937] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 2.704530] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.715067] init: - preinit -
[ 3.045952] mtk_soc_eth 15100000.ethernet wan: renamed from eth1
[ 3.062124] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 3.070579] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 3.090598] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 7.339575] UBIFS (ubi0:2): default file-system created
[ 7.345518] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 7.351236] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 770
[ 7.416543] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 7.424371] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.434267] UBIFS (ubi0:2): FS size: 35807232 bytes (34 MiB, 282 LEBs), max 292 LEBs, journal size 1777664 bytes (1 MiB, 14 LEBs)
[ 7.445894] UBIFS (ubi0:2): reserved for root: 1691263 bytes (1651 KiB)
[ 7.452495] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 9F68719F-2E32-45A5-A7AB-256EBC2FFD7E, small LPT model
[ 7.465555] mount_root: overlay filesystem has not been fully initialized yet
[ 7.472867] mount_root: switching to ubifs overlay
[ 7.481996] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 7.493722] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 7.568399] procd: - early -
[ 7.571329] procd: - watchdog -
[ 8.117554] procd: - watchdog -
[ 8.121073] procd: - ubus -
[ 8.193255] procd: - init -
Please press Enter to activate this console.
[ 8.454722] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.472078] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
[ 8.487623] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357
[ 8.494879] Backport generated by backports.git c8a37ce
[ 8.658416] urngd: v1.0.2 started.
[ 8.986121] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823160739a
[ 9.171901] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823160804
[ 9.272460] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823160840
[ 9.378958] mt798x-wmac 18000000.wifi: missing precal data, size=362512
[ 9.385996] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
[ 9.483361] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
[ 9.655371] PPP generic driver version 2.4.2
[ 9.660598] NET: Registered PF_PPPOX protocol family
[ 9.668671] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 16.892617] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 16.909208] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 16.917731] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 16.924823] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 16.937544] br-lan: port 1(lan1) entered blocking state
[ 16.942865] br-lan: port 1(lan1) entered disabled state
[ 16.948131] mt7530-mdio mdio-bus:1f lan1: entered allmulticast mode
[ 16.954459] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
[ 16.964105] mt7530-mdio mdio-bus:1f lan1: entered promiscuous mode
[ 16.983466] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 16.995722] br-lan: port 2(lan2) entered blocking state
[ 17.000961] br-lan: port 2(lan2) entered disabled state
[ 17.006269] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode
[ 17.014334] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode
[ 17.030241] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 17.041285] br-lan: port 3(lan3) entered blocking state
[ 17.046590] br-lan: port 3(lan3) entered disabled state
[ 17.051899] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode
[ 17.060165] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode
[ 17.075466] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 17.086246] br-lan: port 4(lan4) entered blocking state
[ 17.091486] br-lan: port 4(lan4) entered disabled state
[ 17.096798] mt7530-mdio mdio-bus:1f lan4: entered allmulticast mode
[ 17.105212] mt7530-mdio mdio-bus:1f lan4: entered promiscuous mode
[ 17.117458] mtk_soc_eth 15100000.ethernet wan: PHY [mdio-bus:05] driver [Maxlinear Ethernet GPY211C] (irq=POLL)
[ 17.127579] mtk_soc_eth 15100000.ethernet wan: configuring for phy/2500base-x link mode
[ 20.466777] mt7530-mdio mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.466801] br-lan: port 3(lan3) entered blocking state
[ 20.479903] br-lan: port 3(lan3) entered forwarding state
[ 24.392683] mtk_soc_eth 15100000.ethernet wan: Link is Up - 1Gbps/Full - flow control off
BusyBox v1.37.0 (2026-01-02 17:07:02 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r33943+6-ea9be9b77e
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:~# ubus call system board
{
"kernel": "6.12.80",
"hostname": "OpenWrt",
"system": "ARMv8 Processor rev 4",
"model": "ELECOM WRC-X6000GSD",
"board_name": "elecom,wrc-x6000gsd",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "SNAPSHOT",
"firmware_url": "https://downloads.openwrt.org/",
"revision": "r33943+6-ea9be9b77e",
"target": "mediatek/filogic",
"description": "OpenWrt SNAPSHOT r33943+6-ea9be9b77e",
"builddate": "1776094157"
}
}
root@OpenWrt:~# ubus call system info
{
"localtime": 1776097707,
"uptime": 41,
"load": [
26432,
6272,
2016
],
"memory": {
"total": 506957824,
"free": 397996032,
"shared": 393216,
"buffered": 0,
"available": 386355200,
"cached": 21323776
},
"root": {
"total": 31536,
"free": 31492,
"used": 44,
"avail": 29840
},
"tmp": {
"total": 247536,
"free": 247152,
"used": 384,
"avail": 247152
},
"swap": {
"total": 0,
"free": 0
}
}
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 6.0M 6.0M 0 100% /rom
tmpfs 241.7M 384.0K 241.4M 0% /tmp
/dev/ubi0_2 30.8M 44.0K 29.1M 0% /overlay
overlayfs:/overlay 30.8M 44.0K 29.1M 0% /
tmpfs 512.0K 0 512.0K 0% /dev
root@OpenWrt:~#
