stockのファームウェア形式がWRC-X3000GS2とほぼ同じなので、調整が必要な1点のみ弄って生成
Warning: optional section "sbl1" missing from "/tmp/fw.bin". Continue...
Warning: optional section "sbl2" missing from "/tmp/fw.bin". Continue...
Warning: optional section "u-boot" missing from "/tmp/fw.bin". Continue...
Warning: optional section "lkboot" missing from "/tmp/fw.bin". Continue...
Warning: optional section "ddr-ap-mp03.3" missing from "/tmp/fw.bin". Continue...
Warning: optional section "ssd" missing from "/tmp/fw.bin". Continue...
Warning: optional section "tz" missing from "/tmp/fw.bin". Continue...
Warning: optional section "rpm" missing from "/tmp/fw.bin". Continue...
[ 279.217585] sysupgrade (12650): drop_caches: 3
stat: No such file or directory
(sysupgrade) using fwupgrade_led LED
Sending TERM to remaining processes ... sleep qrtr-ns askfirst cnssdaemon breakpad_report logd rpcd acfg_tool netifd conntrackd lighttpd-angel miniupnpd miniupnpd[5103]: shutting down MiniUPnPd
mcsd [ 280.176055] mc_detach: disabled snooping on br-lan.
mcastds: Leaving mcsd executive program
crond ntpd thermald APFind rngd dnsmasq ipv6_monitor.sh
Please press Enter to activate this console.
Sending KILL to remaining processes ... askfirst rngd
Switching to ramdisk...
Please press Enter to activate this console.
[ 285.258717] UBIFS (ubi2:0): un-mount UBI device 2
[ 285.258767] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
[ 285.273267] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" stops
Performing system upgrade...
[ 287.413001] ubi0 error: ubi_detach_mtd_dev: ubi0 reference count 2, destroy anyway
[ 287.536367] ubi0: detaching mtd17
[ 287.538324] ubi0: mtd17 is detached
ubiformat: mtd15 (nand), size 53739520 bytes (51.2 MiB), 410 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 409 -- 100 % complete
ubiformat: 410 eraseblocks have valid erase counter, mean value is 0
ubiformat: flashing eraseblock 107 -- 100 % complete
ubiformat: formatting eraseblock 409 -- 100 % complete
Flashed ubi
0+1 records in
1+0 records out
2048 bytes (2.0KB) copied, 0.000106 seconds, 18.4MB/s
Unlocking /dev/mtd2 ...
Erasing /dev/mtd2 ...
Writing from <stdin> to /dev/mtd2 ...
0+1 records in
1+0 records out
Unlocking /dev/mtd3 ...
Erasing /dev/mtd3 ...
2048 bytes (2.0KB) copied, 0.000086 seconds, 22.7MB/s
Writing from <stdin> to /dev/mtd3 ...
grep: /sys/block/mmcblk*/mmcblk*p*/uevent: No such file or directory
mstc header exists, write to FWHEADER partition
Unlocking FWHEADER ...
Erasing FWHEADER ...
Writing from /tmp/fw.header to FWHEADER ...
Upgrade completed
Rebooting system...
[ 297.966387] reboot: Restarting system
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00064
S - IMAGE_VARIANT_STRING=MAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c5
B - 126 - PBL, Start
B - 1557 - bootable_media_detect_entry, Start
B - 3283 - bootable_media_detect_success, Start
B - 3286 - elf_loader_entry, Start
B - 8254 - auth_hash_seg_entry, Start
B - 8614 - auth_hash_seg_exit, Start
B - 98390 - elf_segs_hash_verify_entry, Start
B - 167974 - PBL, End
B - 138287 - SBL1, Start
B - 199653 - GCC [RstStat:0x10, RstDbg:0x500100] WDog Stat : 0x4
B - 207949 - clock_init, Start
D - 7320 - clock_init, Delta
B - 215452 - boot_flash_init, Start
D - 14731 - boot_flash_init, Delta
B - 230244 - boot_config_data_table_init, Start
D - 4544 - boot_config_data_table_init, Delta - (575 Bytes)
B - 237900 - Boot Setting : 0x00020618
B - 244427 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:2
B - 251350 - sbl1_ddr_set_params, Start
B - 252936 - Pre_DDR_clock_init, Start
B - 258609 - Pre_DDR_clock_init, End
B - 900848 - do ddr sanity test, Start
D - 30 - do ddr sanity test, Delta
B - 905514 - Image Load, Start
D - 240859 - QSEE Image Loaded, Delta - (578956 Bytes)
B - 1147227 - Image Load, Start
D - 13664 - DEVCFG Image Loaded, Delta - (13592 Bytes)
B - 1160921 - Image Load, Start
D - 152348 - APPSBL Image Loaded, Delta - (364802 Bytes)
B - 1313330 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 1319796 - SBL1, End
D - 1184193 - SBL1, Delta
S - Flash Throughput, 2465 KB/s (958597 Bytes, 388867 us)
S - DDR Frequency, 800 MHz
S - Core 0 Frequency, 800 MHz
U-Boot 2.04.02 (Nov 12 2021 - 14:47:49 +0800)
DRAM: smem ram ptable found: ver: 1 len: 4
512 MiB
NAND: QPIC controller support serial NAND
ID = 394c2
Vendor = c2
Device = 94
Serial Nand Device Found With ID : 0xc2 0x94
Serial NAND device Manufacturer:MX35UF1G24AD-Z4I
Device Size:128 MiB, Page size:2048, Spare Size:64, ECC:4-bit
128 MiB
MMC: sdhci: Node Not found, skipping initialization
PCI Link Intialized
In: serial@78AF000
Out: serial@78AF000
Err: serial@78AF000
machid: 8040002
Turn on Power LED
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
Hit any key to stop autoboot: 0
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: volume 2 ("rootfs_data") re-sized from 9 to 280 LEBs
ubi0: attached mtd1 (name "mtd=0", size 51 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 410, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1636028859
ubi0: available PEBs: 0, total reserved PEBs: 410, PEBs reserved for bad PEB handling: 20
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4190208)
## Loading kernel from FIT Image at 44000000 ...
Using 'config@mp03.3' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-6.12.31
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x440000e8
Data Size: 4154365 Bytes = 4 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41000000
Entry Point: 0x41000000
Hash algo: crc32
Hash value: 9f61e5df
Hash algo: sha1
Hash value: 1acd23d869b48cf884e8f074c379152d2ba08cce
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
Using 'config@mp03.3' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt iodata_wn-dax3000gr device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x443f662c
Data Size: 26251 Bytes = 25.6 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 86d181eb
Hash algo: sha1
Hash value: f751b84f93441ace1f03c6c7e36ec67f5e87795f
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x443f662c
Uncompressing Kernel Image ... OK
Loading Device Tree to 4a3f6000, end 4a3ff68a ... OK
Using machid 0x8040002 from environment
Starting kernel ...
Jumping to AARCH64 kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014]
[ 0.000000] Linux version 6.12.31 (musashino205@TAIHA.NET) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.3.0 r29706+78-df52612351) 14.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Wed Jun 4 20:14:24 2025
[ 0.000000] Machine model: I-O DATA WN-DAX3000GR
[ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a7fffff (4096 KiB) nomap non-reusable tz_apps@4a400000
[ 0.000000] OF: reserved mem: 0x000000004a800000..0x000000004a9fffff (2048 KiB) nomap non-reusable bootloader@4a800000
[ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000
[ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004adfffff (2048 KiB) nomap non-reusable tz@4ac00000
[ 0.000000] OF: reserved mem: 0x000000004b000000..0x000000004dffffff (49152 KiB) nomap non-reusable q6_mem_regions@4b000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x000000004a9fffff]
[ 0.000000] node 0: [mem 0x000000004aa00000-0x000000004aafffff]
[ 0.000000] node 0: [mem 0x000000004ab00000-0x000000004adfffff]
[ 0.000000] node 0: [mem 0x000000004ae00000-0x000000004affffff]
[ 0.000000] node 0: [mem 0x000000004b000000-0x000000004dffffff]
[ 0.000000] node 0: [mem 0x000000004e000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] psci: [Firmware Bug]: failed to set PC mode: -1
[ 0.000000] percpu: Embedded 20 pages/cpu s43288 r8192 d30440 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 coherent_pool=2M
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[ 0.000000] software IO TLB: area num 2.
[ 0.000000] software IO TLB: mapped [mem 0x000000005f540000-0x000000005f5c0000] (0MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00aff7], SPI[448:479]
[ 0.000000] GICv2m: range[mem 0x0b00b000-0x0b00bff7], SPI[480:511]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000129] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000149] pid_max: default: 32768 minimum: 301
[ 0.005130] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.005155] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.070282] rcu: Hierarchical SRCU implementation.
[ 0.070296] rcu: Max phase no-delay instances is 1000.
[ 0.070891] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.080699] smp: Bringing up secondary CPUs ...
[ 0.091098] Detected VIPT I-cache on CPU1
[ 0.091239] CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
[ 0.091448] smp: Brought up 1 node, 2 CPUs
[ 0.091469] SMP: Total of 2 processors activated.
[ 0.091474] CPU: All CPU(s) started at EL1
[ 0.091479] CPU features: detected: 32-bit EL0 Support
[ 0.091486] CPU features: detected: CRC32 instructions
[ 0.091573] alternatives: applying system-wide alternatives
[ 0.091812] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.092074] Memory: 438892K/524288K available (8640K kernel code, 892K rwdata, 2748K rodata, 1664K init, 287K bss, 83552K reserved, 0K cma-reserved)
[ 0.098669] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.098698] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.098817] 29152 pages in range for non-PLT usage
[ 0.098825] 520672 pages in range for PLT usage
[ 0.101079] pinctrl core: initialized pinctrl subsystem
[ 0.103851] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.104885] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.105235] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.105548] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.106082] thermal_sys: Registered thermal governor 'step_wise'
[ 0.106250] cpuidle: using governor menu
[ 0.106604] ASID allocator initialised with 65536 entries
[ 0.111553] /soc@0/interrupt-controller@b000000: Fixed dependency cycle(s) with /soc@0/interrupt-controller@b000000
[ 0.149618] SCSI subsystem initialized
[ 0.149962] usbcore: registered new interface driver usbfs
[ 0.150062] usbcore: registered new interface driver hub
[ 0.150127] usbcore: registered new device driver usb
[ 0.150519] qcom_scm: convention: smc arm 64
[ 0.153442] clocksource: Switched to clocksource arch_sys_counter
[ 0.157523] NET: Registered PF_INET protocol family
[ 0.157809] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.160005] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.160042] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.160066] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.160121] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.160303] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.160945] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
[ 0.161165] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.161202] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.161920] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.161989] PCI: CLS 0 bytes, default 64
[ 0.165201] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.165836] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.165851] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.401968] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.404194] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.404393] msm_serial 78af000.serial: uartclk = 1843199
[ 0.405192] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 21, base_baud = 115199) is a MSM
[ 0.405350] msm_serial: console setup on port #0
[ 0.405434] printk: legacy console [ttyMSM0] enabled
[ 1.133040] msm_serial: driver initialized
[ 1.146623] loop: module loaded
[ 1.151121] spi-nand spi0.0: Macronix SPI NAND was found.
[ 1.151173] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 1.156330] nand: WARNING: (null): the ECC used on your system is too weak compared to the one required by the NAND chip
[ 1.306776] i2c_dev: i2c /dev entries driver
[ 1.311184] sdhci: Secure Digital Host Controller Interface driver
[ 1.311235] sdhci: Copyright(c) Pierre Ossman
[ 1.316338] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.324578] remoteproc remoteproc0: releasing cd00000.remoteproc
[ 1.330219] NET: Registered PF_INET6 protocol family
[ 1.334936] Segment Routing with IPv6
[ 1.337472] In-situ OAM (IOAM) with IPv6
[ 1.341029] NET: Registered PF_PACKET protocol family
[ 1.345559] 8021q: 802.1Q VLAN Support v1.8
[ 1.399661] spi-nand spi0.0: Macronix SPI NAND was found.
[ 1.399709] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 1.405539] nand: WARNING: (null): the ECC used on your system is too weak compared to the one required by the NAND chip
[ 1.412716] 23 qcomsmem partitions found on MTD device spi0.0
[ 1.423302] Creating 23 MTD partitions on "spi0.0":
[ 1.428833] 0x000000000000-0x000000080000 : "0:sbl1"
[ 1.435699] 0x000000080000-0x000000100000 : "0:mibib"
[ 1.440641] 0x000000100000-0x000000140000 : "0:bootconfig"
[ 1.445557] 0x000000140000-0x000000180000 : "0:bootconfig1"
[ 1.450713] 0x000000180000-0x000000280000 : "0:qsee"
[ 1.457413] 0x000000280000-0x000000380000 : "0:qsee_1"
[ 1.462366] 0x000000380000-0x0000003c0000 : "0:devcfg"
[ 1.466479] 0x0000003c0000-0x000000400000 : "0:devcfg_1"
[ 1.471302] 0x000000400000-0x000000440000 : "0:cdt"
[ 1.476877] 0x000000440000-0x000000480000 : "0:cdt_1"
[ 1.481409] 0x000000480000-0x000000500000 : "0:appsblenv"
[ 1.487190] 1 fixed-partitions partitions found on MTD device 0:appsblenv
[ 1.490429] Creating 1 MTD partitions on "0:appsblenv":
[ 1.497255] 0x000000000000-0x000000040000 : "env-data"
[ 1.563171] 0x000000500000-0x000000640000 : "0:appsbl"
[ 1.566899] 0x000000640000-0x000000780000 : "0:appsbl_1"
[ 1.570562] 0x000000780000-0x000000880000 : "0:art"
[ 1.575605] 0x000000880000-0x000000900000 : "0:training"
[ 1.579452] 0x000000900000-0x000003c40000 : "rootfs"
[ 1.665108] mtd: setting mtd16 (rootfs) as root device
[ 1.665796] mtdsplit: no squashfs found in "rootfs"
[ 1.669220] 0x000003c40000-0x000003fc0000 : "config"
[ 1.680874] 0x000003fc0000-0x000007300000 : "rootfs_1"
[ 1.765680] 0x000007300000-0x000007680000 : "config_2"
[ 1.772932] 0x000007680000-0x000007700000 : "idmkey"
[ 1.775240] 0x000007700000-0x000007c00000 : "reserved"
[ 1.786551] 0x000007c00000-0x000007c80000 : "fwheader"
[ 1.788736] 0x000007c80000-0x000007d00000 : "factory"
[ 1.816474] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 800000 KHz
[ 1.818943] remoteproc remoteproc0: cd00000.remoteproc is available
[ 1.826272] qcom-q6-mpd cd00000.remoteproc: pd-1 node found
[ 1.834142] remoteproc remoteproc1: pd-1 is available
[ 1.837850] qcom-q6-mpd cd00000.remoteproc: pd-2 node found
[ 1.844565] remoteproc remoteproc2: pd-2 is available
[ 1.854944] ubi0: attaching mtd16
[ 2.242587] ubi0: scanning is finished
[ 2.295156] ubi0: attached mtd16 (name "rootfs", size 51 MiB)
[ 2.295223] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.299913] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.306733] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.313563] ubi0: good PEBs: 410, bad PEBs: 0, corrupted PEBs: 0
[ 2.320311] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 2.326587] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1636028859
[ 2.333609] ubi0: available PEBs: 0, total reserved PEBs: 410, PEBs reserved for bad PEB handling: 20
[ 2.342928] ubi0: background thread "ubi_bgt0d" started, PID 573
[ 2.353745] block ubiblock0_1: created from ubi0:1(rootfs)
[ 2.372299] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.373224] Freeing unused kernel memory: 1664K
[ 2.378580] Run /sbin/init as init process
[ 2.729252] init: Console is alive
[ 2.729670] init: - watchdog -
[ 3.653518] random: crng init done
[ 3.686834] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.745846] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 3.764897] ssdk_dt_parse_mac_mode[300]:INFO:mac mode1 doesn't exit!
[ 3.764946] ssdk_dt_parse_mac_mode[308]:INFO:mac mode2 doesn't exit!
[ 3.770445] ssdk_dt_parse_port_bmp[1064]:INFO:port_bmp doesn't exist!
[ 3.776753] ssdk_dt_parse_interrupt[942]:INFO:intr-gpio does not exist
[ 5.293462] ssdk_mp_reset_init[1311]:INFO:MP reset successfully!
[ 5.624463] _adpt_mp_uniphy_clk_output_ctrl_set[264]:INFO:uniphy will output clock as 25000000Hz
[ 5.624632] regi_init[2548]:INFO:Initializing SCOMPHY Done!!
[ 5.632486] regi_init[2574]:INFO:qca-ssdk module init succeeded!
[ 5.641864] nss-dp 39c00000.dp1 wan (uninitialized): nss_dp_gmac: Registering netdev wan(qcom-id:1) with GMAC, mac_base: 0xffffffc0816d0000
[ 5.715021] Qualcomm Atheros IPQ5018 internal PHY 88000.mdio-1:07: attached PHY driver (mii_bus:phy_addr=88000.mdio-1:07, irq=POLL)
[ 5.837572] nss-dp 39d00000.dp2 (unnamed net_device) (uninitialized): nss_dp_gmac: Registering netdev eth%d(qcom-id:2) with GMAC, mac_base: 0xffffffc0817a0000
[ 5.838626] Generic PHY fixed-0:00: attached PHY driver (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[ 5.853007] **********************************************************
[ 5.859366] * NSS Data Plane driver
[ 5.865919] **********************************************************
[ 5.896813] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.900509] init: - preinit -
[ 6.003956] qca8k 90000.mdio-1:18: configuring for fixed/sgmii link mode
[ 6.011597] qca8k 90000.mdio-1:18: Link is Up - 1Gbps/Full - flow control off
[ 6.074605] qca8k 90000.mdio-1:18 lan1 (uninitialized): PHY [90000.mdio-1:00] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
[ 6.154571] qca8k 90000.mdio-1:18 lan2 (uninitialized): PHY [90000.mdio-1:01] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
[ 6.224983] qca8k 90000.mdio-1:18 lan3 (uninitialized): PHY [90000.mdio-1:02] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
[ 6.294876] qca8k 90000.mdio-1:18 lan4 (uninitialized): PHY [90000.mdio-1:03] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
[ 6.302339] nss-dp 39d00000.dp2 eth0: entered promiscuous mode
[ 6.306112] DSA: tree 0 setup
Cannot parse config file '/etc/fw_env.config': No such file or directory
Failed to find NVMEM device
[ 7.147999] nss-dp 39d00000.dp2 eth0: PHY Link up speed: 1000
[ 7.151215] qca8k 90000.mdio-1:18 lan1: configuring for phy/gmii link mode
[ 7.153240] adpt_mp_port_netdev_change_notify[1186]:ERROR:netdev change notify with incorrect port 0
[ 7.159618] ssdk_dev_event[2313]:ERROR:netdev change notify failed
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 11.468814] UBIFS (ubi0:2): default file-system created
[ 11.469786] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 11.473100] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 766
[ 11.568534] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 11.568584] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.575431] UBIFS (ubi0:2): FS size: 34283520 bytes (32 MiB, 270 LEBs), max 280 LEBs, journal size 1777664 bytes (1 MiB, 14 LEBs)
[ 11.585284] UBIFS (ubi0:2): reserved for root: 1619295 bytes (1581 KiB)
[ 11.596903] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 46D80507-DC8D-4509-A17E-C8F5CB6AB2EA, small LPT model
[ 11.606337] mount_root: overlay filesystem has not been fully initialized yet
[ 11.615706] mount_root: switching to ubifs overlay
[ 11.632313] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 11.636413] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 11.730129] procd: - early -
[ 11.730390] procd: - watchdog -
[ 12.395518] procd: - watchdog -
[ 12.485568] procd: - ubus -
[ 12.644599] procd: - init -
Please press Enter to activate this console.
[ 13.382515] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.593733] urngd: v1.0.2 started.
[ 13.807710] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[ 13.807755] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[ 13.851408] NET: Registered PF_QIPCRTR protocol family
[ 14.067394] PPP generic driver version 2.4.2
[ 14.070354] NET: Registered PF_PPPOX protocol family
[ 14.091867] ath11k c000000.wifi: Multipd architecture - userpd: 1
[ 14.092568] ath11k c000000.wifi: ipq5018 hw1.0
[ 14.097055] ath11k c000000.wifi: FW memory mode: 2
[ 14.208337] remoteproc remoteproc1: powering up pd-1
[ 14.209060] remoteproc remoteproc1: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[ 14.212400] remoteproc remoteproc0: powering up cd00000.remoteproc
[ 14.220912] remoteproc remoteproc0: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[ 16.675617] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[ 16.694241] remoteproc remoteproc1: remote processor pd-1 is now up
[ 16.697720] ath11k b00a040.wifi1: Multipd architecture - userpd: 2
[ 16.700079] ath11k b00a040.wifi1: qcn6122 hw1.0
[ 16.705660] ath11k b00a040.wifi1: FW memory mode: 2
[ 16.722272] ath11k c000000.wifi: qmi fail to get qcom,m3-dump-addr, ignore m3 dump mem req
[ 16.729928] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[ 16.729986] ath11k c000000.wifi: fw_version 0x270206d0 fw_build_timestamp 2022-08-04 13:28 fw_build_id WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
[ 16.778902] remoteproc remoteproc2: powering up pd-2
[ 16.779227] remoteproc remoteproc2: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[ 16.794275] remoteproc remoteproc2: remote processor pd-2 is now up
[ 16.806883] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 16.875457] ath11k b00a040.wifi1: qmi ignore invalid mem req type 10
[ 16.882827] ath11k b00a040.wifi1: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[ 16.882896] ath11k b00a040.wifi1: fw_version 0x270206d0 fw_build_timestamp 2022-08-04 13:28 fw_build_id WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
[ 16.948211] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
[ 17.754809] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
[ 32.495868] nss-dp 39d00000.dp2 eth0: PHY Link is down
[ 32.514397] nss-dp 39d00000.dp2 eth0: PHY Link up speed: 1000
[ 32.527837] qca8k 90000.mdio-1:18 lan1: configuring for phy/gmii link mode
[ 32.578763] br-lan: port 1(lan1) entered blocking state
[ 32.578828] br-lan: port 1(lan1) entered disabled state
[ 32.583941] qca8k 90000.mdio-1:18 lan1: entered allmulticast mode
[ 32.588046] nss-dp 39d00000.dp2 eth0: entered allmulticast mode
[ 32.615488] qca8k 90000.mdio-1:18 lan1: entered promiscuous mode
[ 32.680223] qca8k 90000.mdio-1:18 lan2: configuring for phy/gmii link mode
[ 32.682856] br-lan: port 2(lan2) entered blocking state
[ 32.686204] br-lan: port 2(lan2) entered disabled state
[ 32.693808] qca8k 90000.mdio-1:18 lan2: entered allmulticast mode
[ 32.706530] qca8k 90000.mdio-1:18 lan2: entered promiscuous mode
[ 32.753904] qca8k 90000.mdio-1:18 lan3: configuring for phy/gmii link mode
[ 32.756360] br-lan: port 3(lan3) entered blocking state
[ 32.759714] br-lan: port 3(lan3) entered disabled state
[ 32.773660] qca8k 90000.mdio-1:18 lan3: entered allmulticast mode
[ 32.776582] qca8k 90000.mdio-1:18 lan3: entered promiscuous mode
[ 32.856586] qca8k 90000.mdio-1:18 lan4: configuring for phy/gmii link mode
[ 32.858175] br-lan: port 4(lan4) entered blocking state
[ 32.862390] br-lan: port 4(lan4) entered disabled state
[ 32.869408] qca8k 90000.mdio-1:18 lan4: entered allmulticast mode
[ 32.885638] qca8k 90000.mdio-1:18 lan4: entered promiscuous mode
[ 33.523978] adpt_mp_port_netdev_change_notify[1186]:ERROR:netdev change notify with incorrect port 0
[ 33.524044] ssdk_dev_event[2313]:ERROR:netdev change notify failed
[ 35.766405] qca8k 90000.mdio-1:18 lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 35.766564] adpt_mp_port_netdev_change_notify[1186]:ERROR:netdev change notify with incorrect port 0
[ 35.773247] ssdk_dev_event[2313]:ERROR:netdev change notify failed
[ 35.782485] br-lan: port 2(lan2) entered blocking state
[ 35.788402] br-lan: port 2(lan2) entered forwarding state
BusyBox v1.37.0 (2025-06-04 20:14:24 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r29932+19-c78765213e
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
OpenWrt recently switched to the "apk" package manager!
OPKG Command APK Equivalent Description
------------------------------------------------------------------
opkg install <pkg> apk add <pkg> Install a package
opkg remove <pkg> apk del <pkg> Remove a package
opkg upgrade apk upgrade Upgrade all packages
opkg files <pkg> apk info -L <pkg> List package contents
opkg list-installed apk info List installed packages
opkg update apk update Update package lists
opkg search <pkg> apk search <pkg> Search for packages
------------------------------------------------------------------
For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet
root@OpenWrt:~# ubus call system board
{
"kernel": "6.12.31",
"hostname": "OpenWrt",
"system": "ARMv8 Processor rev 4",
"model": "I-O DATA WN-DAX3000GR",
"board_name": "iodata,wn-dax3000gr",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "SNAPSHOT",
"firmware_url": "https://downloads.openwrt.org/",
"revision": "r29932+19-c78765213e",
"target": "qualcommax/ipq50xx",
"description": "OpenWrt SNAPSHOT r29932+19-c78765213e",
"builddate": "1749068064"
}
}
root@OpenWrt:~# ubus call system info
{
"localtime": 1749068142,
"uptime": 92,
"load": [
22784,
9824,
3552
],
"memory": {
"total": 453017600,
"free": 283422720,
"shared": 303104,
"buffered": 0,
"available": 278491136,
"cached": 34000896
},
"root": {
"total": 30160,
"free": 30092,
"used": 68,
"avail": 28512
},
"tmp": {
"total": 221200,
"free": 220904,
"used": 296,
"avail": 220904
},
"swap": {
"total": 0,
"free": 0
}
}
root@OpenWrt:~# ubinfo -a
UBI version: 1
Count of UBI devices: 1
UBI control device major/minor: 10:127
Present UBI devices: ubi0
ubi0
Volumes count: 3
Logical eraseblock size: 126976 bytes, 124.0 KiB
Total amount of logical eraseblocks: 410 (52060160 bytes, 49.6 MiB)
Amount of available logical eraseblocks: 0 (0 bytes)
Maximum count of volumes 128
Count of bad physical eraseblocks: 0
Count of reserved physical eraseblocks: 20
Current maximum erase counter value: 3
Minimum input/output unit size: 2048 bytes
Character device major/minor: 246:0
Present volumes: 0, 1, 2
Volume ID: 0 (on ubi0)
Type: dynamic
Alignment: 1
Size: 33 LEBs (4190208 bytes, 3.9 MiB)
State: OK
Name: kernel
Character device major/minor: 246:1
-----------------------------------
Volume ID: 1 (on ubi0)
Type: dynamic
Alignment: 1
Size: 73 LEBs (9269248 bytes, 8.8 MiB)
State: OK
Name: rootfs
Character device major/minor: 246:2
-----------------------------------
Volume ID: 2 (on ubi0)
Type: dynamic
Alignment: 1
Size: 280 LEBs (35553280 bytes, 33.9 MiB)
State: OK
Name: rootfs_data
Character device major/minor: 246:3
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 9.0M 9.0M 0 100% /rom
tmpfs 216.0M 296.0K 215.7M 0% /tmp
/dev/ubi0_2 29.5M 68.0K 27.8M 0% /overlay
overlayfs:/overlay 29.5M 68.0K 27.8M 0% /
tmpfs 512.0K 0 512.0K 0% /dev
