ヤフオクでサポートできそうなデバイスを探していた際、商品説明の "get hardware status" に含まれていた "Network Card Chipset" の "Marvell NETA" を見て衝動的に確保したもの（netaはMarvell SoCのイーサネットアダプタ）。
サポートできるかわからないものの、弄っていくのでメモ。
Switch, PHY
| zone | WAN | LAN (88E6176) | |||||
|---|---|---|---|---|---|---|---|
| port (FG-50E) |
WAN2 | WAN1 | 5 | 4 | 3 | 2 | 1 |
| port | (88E1512, addr:0x0) |
(88E1512, addr:0x1) |
port0 | port1 | port2 | port3 | port4 |
MAC
確認中
U-Boot
Fortinetのブート用プログラム？が呼ばれてしまう為U-Boot本体では中断できず
（ブートメニュー）
[C]: Configure TFTP parameters. [R]: Review TFTP parameters. [T]: Initiate TFTP firmware transfer. [F]: Format boot device. [I]: System information. [B]: Boot with backup firmware and set as default. [Q]: Quit menu and continue to boot. [H]: Display this list of options.[I]: System information. -> [I]: Display system information.Vendor ID : Fortinet CPU family : Cortex CPU model : Cortex-A9 CPU MHz : 1600 MHz Cache size : 64 KB Memory : DDR SDRAM 2GB Platform ID : FGT50E Serial number : FGT50E3Uxxxxxxxx BIOS Ver:05000016 Restricted mode : Disable Menu timeout : 60[R]: Review TFTP parameters.Image download port: WAN1 DHCP status: Disabled Local VLAN ID: Local IP address: 192.168.1.188 Local subnet mask: 255.255.255.0 Local gateway: 192.168.1.254 TFTP server IP address: 192.168.1.168 Firmware file name: image.out[T]: Initiate TFTP firmware transfer.Please connect TFTP server to Ethernet port 'WAN1'. MAC: 70:4c:a5:26:4d:7c Connect to tftp server 192.168.1.168 ... ########### Image Received. Checking image... OK Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?
Kernel
FortiGateとしてのコンソールが表示されるのみ（dmesg無し
bootlog
FortiGate-50E (17:37-01.31.2017) Ver:05000016 Serial number: FGT50E3Uxxxxxxxx CPU(00): 1600MHz Total RAM: 2GB Initializing boot device... Initializing MAC... egiga1 Please wait for OS to boot, or press any key to display configuration menu.......... Booting OS... Reading boot image... 2808320 bytes. Initializing firewall... System is starting... FGT50E3Uxxxxxxxx login:
