かねてよりCavium Octeon搭載機として気になっていた機種であり、ヤフオクの出品ページでにらめっこして悩んだ挙句に閉じるということをくりかえしていたもの。
いい加減未練タラタラなので、丁度安くなっていたこともあって思い切って確保した。
弄っていくのでメモ。
Switch
確認中
MAC
確認中
U-Boot
Allied Telesisのブート用プログラムが呼ばれてしまう為U-Boot本体では中断できず
（ブートメニュー）
Boot Menu: WARNING: The bootloader is not currently password protected. ------------------------------------------------------ S. Security Level ------------------------------------------------------ 0. Restart 1. Perform one-off boot from alternate source 2. Change the default boot source (for advanced users) 3. Update Bootloader 4. Adjust the console baud rate 5. Special boot options 6. System information 7. Restore Bootloader factory settings ------------------------------------------------------ 9. Quit and continue booting6. System informationSystem information: System (Detected values) ------------------------------------------------------ CPU: Type ...............: MIPS64 Memory: Total installed ....: 1024 MB Flash: Total installed ....: 3776 MB ------------------------------------------------------ Product information ------------------------------------------------------ Compatible software ..: 16 (r16) Serial ...............: 000194G********* Manufacture date .....: 05/2017 Product ..............: 422 Product name .........: ar3050s Revision .............: B First MAC address ....: 00:00:cd:xx:xx:48 ------------------------------------------------------ Boot software information ------------------------------------------------------ Version ..............: 5.1.6 Build time ...........: Feb 17 2017 - 11:42:44 +1300 Built by .............: maker Build host ...........: Build key ............: arc Compatible products: 422 ................: ar3050s 425 ................: ar4050s 453 ................: ar2050v 454 ................: ar2010v ------------------------------------------------------4. Adjust the console baud rateデフォルトは9600
Select baud rate: 0. Return to previous menu ------------------------------------------------------ 1. 9600 2. 19200 3. 38400 4. 57600 5. 1152001. Perform one-off boot from alternate source-->3. TFTP (tftp://)（ゲートウェイ以外は要入力）
Select device: 0. Return to previous menu ------------------------------------------------------ 1. Flash (flash:) 2. SD Card (card:) 3. TFTP (tftp://) 4. YMODEM (ymodem:) 6. USB (usb:) Enter selection ==> 3 Enter physical download port (1-8)... []: 1 Enter IP version [4|6]................ [4]: Enter IP address for this device ..... [0.0.0.0]: 192.168.0.1 Enter subnet mask .................... [0.0.0.0]: 255.255.255.0 Enter gateway IP ..................... [0.0.0.0]: Enter TFTP server IP ................. [0.0.0.0]: 192.168.0.10 Enter filename ....................... []: test.bin Loading tftp://192.168.0.10/test.bin... Downloading from port 1
Kernel
#show systemawplus#show system System Status Sat Oct 12 01:06:49 2019 Board ID Bay Board Name Rev Serial number -------------------------------------------------------------------------------- Base 422 AR3050S B-3 000194G********* -------------------------------------------------------------------------------- RAM: Total: 953088 kB Free: 778936 kB Flash: 3.6GB Used: 47.0MB Available: 3.3GB -------------------------------------------------------------------------------- Environment Status : Normal Uptime : 0 days 00:11:21 Bootloader version : 5.1.6 Current software : AR3050S-5.4.7-1.1.rel Software version : 5.4.7-1.1 Build date : Fri Jul 14 03:52:21 UTC 2017 Current boot config: flash:/default.cfg (file not found) System Name awplus System Contact System Location#show versionawplus#show version AlliedWare Plus (TM) 5.4.7 07/14/17 03:52:17 Build name : arc-5.4.7-1.1.rel Build date : Fri Jul 14 03:52:21 UTC 2017 Build type : RELEASE （各種ソフトウェアライセンス情報）#show bootawplus#show boot Boot configuration -------------------------------------------------------------------------------- Current software : AR3050S-5.4.7-1.1.rel Current boot image : flash:/AR3050S-5.4.7-1.1.rel (file exists) Backup boot image : Not set Default boot config: flash:/default.cfg Current boot config: flash:/default.cfg (file not found) Backup boot config: Not set Autoboot status : disabled Boot Security Level: none#show cpuawplus#show cpu CPU averages: 1 second: 3%, 20 seconds: 1%, 60 seconds: 2% System load averages: 1 minute: 0.18, 5 minutes: 0.17, 15 minutes: 0.14 Current CPU load: userspace: 2%, kernel: 4%, interrupts: 0% iowaits: 0% user processes ============== pid name thrds cpu% pri state sleep% runtime （省略） kernel threads ============== pid name cpu% pri state sleep% runtime （省略）#show platform table macaddrawplus#show platform table macaddr [Instance 0] MAC address table: (3 entries) -------------------------------------------------------------------------- Index MAC VID OutPort Hit Tgid Unit Mod Port Perm L3 -------------------------------------------------------------------------- 0 0000.cdxx.xx4a 4091 CPU 0 - 0 0 8 1 0 1 0000.cdxx.xx4a 1 CPU 0 - 0 0 8 1 0 2 0000.cdxx.xx4a 4092 CPU 0 - 0 0 8 1 0#show platform table vlanawplus#show platform table vlan [Instance 0] VLAN table ---------- VLAN configurations per port: unit 0 Port 0 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Port 1 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Port 2 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Port 3 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Port 4 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Port 5 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Port 6 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Port 7 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Port 8 mac vlan enabled = 0 subnet vlan enabled = 0 pvid = 1 Count 3 Mac Based Vlan Information: Subnet Based Vlan Information: ------------------------------------------------------------------------------ Port Based Vlan Information Vid 1 NumMemPorts 9 Multicast flood mode IPv4 Ucast/Mcast Yes/Yes IPv6 Ucast/Mcast Yes/Yes Local Member Ports: port1.0.1-port1.0.8, CPU Local Tagged Ports: CPU Vid 4091 NumMemPorts 1 Multicast flood mode IPv4 Ucast/Mcast Yes/Yes IPv6 Ucast/Mcast Yes/Yes Local Member Ports: CPU Local Tagged Ports: CPU Vid 4092 NumMemPorts 1 Multicast flood mode IPv4 Ucast/Mcast Yes/Yes IPv6 Ucast/Mcast Yes/Yes Local Member Ports: CPU Local Tagged Ports: CPUshow system environment恐らくLM81によるもの
awplus#show system environment Environment Monitoring Status Overall Status: Normal Resource ID: 1 Name: AR3050S ID Sensor (Units) Reading Low Limit High Limit Status 1 Fan: Fan (Rpm) 3590 2411 - Ok 2 Voltage: 2.5V (Volts) 2.448 2.344 2.865 Ok 3 Voltage: Battery (Volts) 2.953 2.700 3.586 Ok 4 Voltage: 3.3V (Volts) 3.248 2.973 3.627 Ok 5 Voltage: 5.0V (Volts) 4.922 4.505 5.495 Ok 6 Voltage: 12.0V (Volts) 11.313 5.375 13.188 Ok 7 Voltage: 0.85V (Volts) 0.830 0.802 0.900 Ok 8 Temp: Internal (Degrees C) 27 58(Hyst) 63 Okbootlog
Allied Telesis機としての独自の起動ログが表示されるのみ（dmesg無し）
Bootloader 5.1.6 loaded Press <Ctrl+B> for the Boot Menu Reading filesystem... Loading flash:AR3050S-5.4.7-1.1.rel... Verifying release... OK Booting... Starting base/first... [ OK ] Mounting virtual filesystems... [ OK ] ______________ ____ /\ \ / /______\ / \ \_ __/ /| ______ | / \ | | / | ______ | / \ \ / / \ ____ / /______/\____\ \/ /____________/ Allied Telesis Inc. AlliedWare Plus (TM) v5.4.7 Current release filename: AR3050S-5.4.7-1.1.rel Built: Fri Jul 14 03:52:17 UTC 2017 Mounting static filesystems... [ OK ] Checking flash filesystem... [ OK ] Mounting flash filesystem (journaled)... [ OK ] Checking for last gasp debug output... [ OK ] Checking NVS filesystem... [ OK ] Mounting NVS filesystem... [ OK ] Initializing random number generator... [ OK ] Starting base/hwrandom... [ OK ] Starting base/dbus... [ OK ] Starting base/syslog... [ OK ] Starting base/loopback... [ OK ] Starting base/sysctl... [ OK ] Received event syslog.done Starting base/modules... [ OK ] Received event modules.done Starting base/reboot-stability... [ OK ] Checking system reboot stability... [ OK ] Starting base/apteryx... [ OK ] Starting base/crond... [ OK ] Starting base/appmond... [ OK ] Starting base/clockcheck... [ OK ] Starting hardware/timeout... [ OK ] Starting base/inet... [ OK ] Received event apteryx.done Starting network/streamd... [ OK ] Starting network/ddnsd... [ OK ] Starting base/alfred... [ OK ] Starting network/firewalld... [ OK ] Starting network/tunneld... [ OK ] Starting network/statmond... [ OK ] Starting network/ike... [ OK ] Starting network/kermond... [ OK ] Starting network/recorder... [ OK ] Starting network/tcontrold... [ OK ] Starting hardware/plugman... [ OK ] Starting hardware/openhpi... [ OK ] Starting network/prol2tp... [ OK ] Starting base/logconf... [ OK ] Starting network/pbrd... [ OK ] Received event prol2tp.done Starting network/l2tpd... [ OK ] Received event board.inserted Starting hardware/hardware-done... [ OK ] Received event hardware.done Starting network/startup... [ OK ] Starting base/external-media... [ OK ] Received event hostcfg.done Starting network/licd... [ OK ] Received event network.enabled Initializing HA processes: atmf_agentd, ddnsd, hostd, nsm, statmond, atmfd, auth cntrd, hsl, lacp, mstp, ospf6d, ripd, ripngd rmon, vrrpd, bgpd, imi, ospfd, pdmd, pim6d pimd Received event network.initialized Assigning Active Workload to HA processes: hsl, authd, bgpd, lacpd, mstpd, nsm, ospf6d ospfd, pdmd, pim6d, pimd, ripd, ripngd, rmond vrrpd, imi Received event network.activated Loading default configuration Warning: flash:/default.cfg does not exist, loading factory defaults. .. done! Received event network.configured awplus login:dmesg
（
show platform full-debugのKernel ring bufferから抜粋）Linux version 4.4.6-at1 (maker@maker13-build) (gcc version 4.7.4 (crosstool-NG crosstool-ng-1.22.0) ) #1 SMP Fri Jul 14 03:31:05 UTC 2017 Skipping L2 locking due to reduced L2 cache size CVMSEG size: 2 cache lines (256 bytes) CPU0 revision is: 000d9602 (Cavium Octeon III) FPU revision is: 00739600 Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. Determined physical RAM map: memory: 0000000002370000 @ 0000000000100000 (usable after init) memory: 000000000006a000 @ 0000000004886000 (usable after init) memory: 000000000b000000 @ 0000000004e00000 (usable) memory: 000000002d800000 @ 0000000022800000 (usable) memory: 0000000000d2fec0 @ 0000000004000000 (usable) Wasting 458752 bytes for tracking 8192 unused pages Initial ramdisk at: 0x8000000000100000 (37175296 bytes) Using passed Device Tree. software IO TLB [mem 0x0551c000-0x0555c000] (0MB) mapped at [800000000551c000-800000000555bfff] Zone ranges: DMA32 [mem 0x0000000000100000-0x00000000efffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000100000-0x000000000246ffff] node 0: [mem 0x0000000004000000-0x0000000004d2dfff] node 0: [mem 0x0000000004e00000-0x000000000fdfffff] node 0: [mem 0x0000000022800000-0x000000004fffffff] Initmem setup node 0 [mem 0x0000000000100000-0x000000004fffffff] On node 0 totalpages: 121935 DMA32 zone: 834 pages used for memmap DMA32 zone: 0 pages reserved DMA32 zone: 121935 pages, LIFO batch:15 Primary instruction cache 78kB, virtually tagged, 39 way, 16 sets, linesize 128 bytes. Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes. PERCPU: Embedded 8 pages/cpu @8000000005574000 s22144 r8192 d35200 u65536 pcpu-alloc: s22144 r8192 d35200 u65536 alloc=8*8192 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121101 Kernel command line: console=ttyS0,9600 root=/dev/ram0 releasefile=AR3050S-5.4.7-1.1.rel bootversion=5.1.6 loglevel=1 maxcpus=2 mtdoops.mtddev=errlog securitylevel=1 reladdr=0x8000000020010000,2755fff PID hash table entries: 4096 (order: 2, 32768 bytes) Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 6, 524288 bytes) Memory: 916376K/975480K available (6738K kernel code, 439K rwdata, 1524K rodata, 424K init, 4351K bss, 59104K reserved, 0K cma-reserved) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:127 CIB interrupt controller probed: 800107000000e000 23 CIB interrupt controller probed: 800107000000e200 12 CIB interrupt controller probed: 800107000000e400 6 CIB interrupt controller probed: 800107000000ec00 15 CIB interrupt controller probed: 800107000000e600 4 CIB interrupt controller probed: 800107000000e800 11 CIB interrupt controller probed: 800107000000e900 11 clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns Calibrating delay loop (skipped) preset value.. 1600.00 BogoMIPS (lpj=8000000) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 2048 (order: 1, 16384 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 16384 bytes) Checking for the daddi bug... no. SMP: Booting CPU01 (CoreId 1)... CPU1 revision is: 000d9602 (Cavium Octeon III) FPU revision is: 00739600 Brought up 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns NET: Registered protocol family 16 Not in host mode, PCI Controller not initialized SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource OCTEON_CVMCOUNT NET: Registered protocol family 2 TCP established hash table entries: 16384 (order: 4, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) UDP hash table entries: 512 (order: 1, 16384 bytes) UDP-Lite hash table entries: 512 (order: 1, 16384 bytes) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 128 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (junk in compressed archive); looks like an initrd Freeing initrd memory: 36288K (8000000000100000 - 8000000002470000) futex hash table entries: 512 (order: 3, 65536 bytes) HugeTLB registered 8 MB page size, pre-allocated 0 pages squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.23) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed. Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled console [ttyS0] disabled 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 44, base_baud = 31250000) is a OCTEON console [ttyS0] enabled octeon_rng octeon_rng: Octeon Random Number Generator brd: module loaded loop: module loaded 2 ofpart partitions found on MTD device 10000000.nvs Creating 2 MTD partitions on "10000000.nvs": 0x000000000000-0x000000070000 : "nvs" 0x000000070000-0x000000080000 : "errlog" mtdoops: ready 0, 1 (no erase) mtdoops: Attached to MTD device 1 spi-octeon 1070000001000.spi: OCTEON SPI bus driver libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> PPP generic driver version 2.4.2 NET: Registered protocol family 24 usbcore: registered new interface driver asix usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver cdc_ncm usbcore: registered new interface driver qmi_wwan usbcore: registered new interface driver cdc_wdm usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 i2c /dev entries driver rtc-ds1307 0-0068: rtc core: registered ds1340 as rtc0 i2c-octeon 1180000001000.i2c: version 2.0 i2c-octeon 1180000001200.i2c: version 2.0 i2c i2c-1: Added multiplexed i2c bus 2 i2c i2c-1: Added multiplexed i2c bus 3 i2c i2c-1: Added multiplexed i2c bus 4 i2c i2c-1: Added multiplexed i2c bus 5 pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9546 octeon_wdt: Initial granularity 5 Sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver GPIO 500 is txdis-gpio line for eth2 atl_cage 2-0050: atl_cage sfpeth2 successfully probed GPIO 501 is txdis-gpio line for eth1 atl_cage 3-0050: atl_cage sfpeth1 successfully probed oprofile: using timer interrupt. u32 classifier Performance counters on Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. nf_conntrack version 0.5.0 (7442 buckets, 29768 max) ctnetlink v0.93: registering with nfnetlink. ESP connection tracking enabled ip_set: protocol 6 ipip: IPv4 over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver IPv4 over IPsec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver ip6_gre: GRE over IPv6 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Bridge firewalling registered Ebtables v2.0 registered l2tp_core: L2TP core driver, V2.0+ l2tp_ppp: PPPoL2TP kernel driver, V2.0+ l2tp_ip: L2TP IP encapsulation support (L2TPv3), 1.0+ l2tp_netlink: L2TP netlink interface, 1.0+ l2tp_eth: L2TP ethernet pseudowire support (L2TPv3), 1.0+ l2tp_debugfs: L2TP debugfs support, 1.0+ l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3), 1.0+ L2TP PPPoE Access Concentrator driver, V1.2.1 8021q: 802.1Q VLAN Support v1.8 tipc: Activated (version 2.0.0) NET: Registered protocol family 30 tipc: Started in single node mode reset_gpio 2 mdio-octeon 1180000001800.mdio: Reseting MDIO libphy: mdio-octeon: probed mdio-octeon 1180000001800.mdio: Version 1.1 platform 1180068000000.uctl: clocks initialized. xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 45, io mem 0x1680000000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 4.4.6-at1 xhci-hcd usb usb1: SerialNumber: xhci-hcd.0.auto hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 4.4.6-at1 xhci-hcd usb usb2: SerialNumber: xhci-hcd.0.auto hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Interface 0 has 1 ports (SGMII) Interface 1 has 1 ports (SGMII) Setting rgmii-tx-set to 0x18 Setting rgmii-rx-set to 0x18 Setting rgmii-tx-set to 0x18 Setting rgmii-rx-set to 0x18 Interface 4 has 1 ports (AGL) rtc-ds1307 0-0068: setting system clock to 2019-10-12 00:55:31 UTC (1570841731) switch_reset_gpio 481 boardinfo_device_register:220 board_class:80000000002d1800 dev 80000000003f2600 (0) Registered boardinfo device 00 lm81a 0-002c: cold start: config was 0x08 mode 1 arcbrd_add:266 - LM81 client 80000000003f2200 RAMDISK: squashfs filesystem found at block 0 RAMDISK: Loading 36282KiB [1 disk] into ram disk... / / / / / / / / / / / / / / / / / done. VFS: Mounted root (squashfs filesystem) readonly on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 424K (8000000004886000 - 80000000048f0000) random: init urandom read with 27 bits of entropy available >udevd[133]: starting version 174 mmc0: MAN_BKOPS_EN bit is not set mmc0: new DDR MMC card at address 0001 mmcblk0: mmc0:0001 004G60 3.69 GiB mmcblk0boot0: mmc0:0001 004G60 partition 1 2.00 MiB mmcblk0boot1: mmc0:0001 004G60 partition 2 2.00 MiB mmcblk0rpmb: mmc0:0001 004G60 partition 3 512 KiB mmcblk0: p1 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) random: nonblocking pool is initialized sh (376): drop_caches: 3 ipifwd: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint NET: Registered protocol family 41 NET: Registered protocol family 43 NET: Registered protocol family 42 NET: Registered protocol family 45 NET: Registered protocol family 46 NET: Registered protocol family 50 NET: Registered protocol family 53 NET: Registered protocol family 48 NET: Registered protocol family 51 NET: Registered protocol family 52 NET: Registered protocol family 47 NET: Registered protocol family 56 NET: Registered protocol family 58 NET: Registered protocol family 62 NET: Registered protocol family 59 NET: Registered protocol family 57 NET: Registered protocol family 63 NET: Registered protocol family 49 Bringing L2 switch out of reset (GPIO 481) linux-kernel-bde (419): found robo device with 0:0362:5e14:5e10:04 sh (1185): drop_caches: 3 IPv6: ADDRCONF(NETDEV_UP): vlan1: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready eth1: Link down eth2: Link down sh (1833): drop_caches: 3
