HDL2-A/HDL-A, HDL2-AAXに続いてNASを探していた際、ヤフオクで見付けて悩んだ末に落札したもの。
これまで弄ってきた機種よりも多いストレージ4台を格納することができ、使い方の幅も広がるのではと興味を惹かれた。
弄っていくのでメモ。
MAC
確認中
Bootloader
フロントのコンソールポートからログは出力されるが入力が無効化されている為、ブート中断は不可
Kernel
Kernelにおいてもコンソールポートの入力が無効化されている為、ブート完了後も操作不可
ドライブベイのストレージからブートできない場合、NAND Flashからブートされる
bootlog
BootROM 1.20 Booting from SPI flash MARU_DEBUG_RESET High speed PHY - Ver 1.6.0 (COM-PHY-V20) Read Reg: 0x00020868= 01022200 Write Reg: 0x00020868= 01022000 Step 1: First phase of PEX-PIPE Configuration Write Reg: 0x00041B00= 00C10025 Write Reg: 0x00041B00= 00C20200 Write Reg: 0x00041B00= 00C5011F Write Reg: 0x00081B00= 00C10025 Write Reg: 0x00081B00= 00C3000F Write Reg: 0x00081B00= 00C5011F Step 2: Configure the desire PIN_PHY_GEN Read Reg: 0x000A4058= 00000227 Write Reg: 0x000A4058= 00000220 Read Reg: 0x000A2058= 00000227 Write Reg: 0x000A2058= 00000220 Step 3 QSGMII enable Step 4: Configure SERDES MUXes Write Reg: 0x00018270= 02211111 Write Reg: 0x00018274= 00000000 Step 5: Activate the RX High Impedance Mode Write Reg: 0x00041B00= 00481084 Write Reg: 0x00081B00= 00489084 Write Reg: 0x000A4920= 00008084 Write Reg: 0x000A2920= 00008084 Step 6: [PEX-Only] PEX-Main configuration (X4 or X1) Write Reg: 0x00018204= 00000200 Read Reg: 0x00018204= 00000200 Write Reg: 0x00018204= 00000330 Step 6.2: [PEX-Only] PCI Express Link Capabilities Read Reg: 0x0004006C= 0007AC42 Write Reg: 0x0004006C= 0007AC42 Read Reg: 0x0008006C= 0007AC12 Write Reg: 0x0008006C= 0007AC12 Step 7: [PEX-X4 Only] To create PEX-Link Read Reg: 0x000182F8= FFFF0000 Write Reg: 0x000182F8= FFFF000F Steps 7,8,9,10 and 11 Write Reg: 0x00041B00= 0001FC60 Write Reg: 0x00081B00= 0001FC60 Write Reg: 0x000A4804= 0000F801 Write Reg: 0x000A488C= 00000400 Write Reg: 0x000A4918= 00000400 Read Reg: 0x000A4058= 00000220 Write Reg: 0x000A4058= 00000227 Write Reg: 0x000A2804= 0000F801 Write Reg: 0x000A288C= 00000400 Write Reg: 0x000A2918= 00000400 Read Reg: 0x000A2058= 00000220 Write Reg: 0x000A2058= 00000227 Steps 12: [PEX-Only] Last phase of PEX-PIPE ConfigurationWrite Reg: 0x00041B00= 00C10024 Write Reg: 0x00081B00= 00C10024 Steps 13: Wait 15ms before checking resultsRead Reg: 0x000A405C= 00013007 Read Reg: 0x000A205C= 00003007 Steps 14: [PEX-Only] In order to configureRead Reg: 0x00040060= 00420010 Write Reg: 0x00040060= 00420010 Read Reg: 0x00080060= 00420010 Write Reg: 0x00080060= 00420010 Steps 15: [PEX-Only] In order to configureWrite Reg: 0x00041B00= 000F2A21 Write Reg: 0x00041B00= 004F6219 Write Reg: 0x00081B00= 000F2A21 Write Reg: 0x00081B00= 004F6219 Write Reg: 0x000A483C= 00008A31 Write Reg: 0x000A4834= 0000C928 Write Reg: 0x000A4838= 000030F0 Write Reg: 0x000A4840= 000030F5 Write Reg: 0x000A283C= 00008A31 Write Reg: 0x000A2834= 0000C928 Write Reg: 0x000A2838= 000030F0 Write Reg: 0x000A2840= 000030F5 Steps 16: [PEX-Only] Training EnableRead Reg: 0x00018204= 00000330 Write Reg: 0x00018204= 00000333 DDR3 Init. - SPD_SUPPORT: UNDEFINED DDR3 Init. - defined(MV88F78X60) && !defined(MV88F78X60_Z1) : True DDR3 Training Sequence - Ver 3.0.0 DDR3 Init. - uiFabOpt : 5 DDR3 Init. - socNum : 00000001 DDR3 Traning Squence - Stage 0 DDR3 Init. - uiCpuFreq : 00000003 DDR3 Init. - ECC_SUPPORT: UNDEFINED DDR3 Init. - DQS_CLK_ALIGNED: UNDEFINED DDR3 Traning Squence - Stage 1 DDR3 Training Sequence - Static MC Init DDR3 Init.[ddr3GetStaticDdrMode()] - chipBoardRev : 5 * DDR3 Init.[ddr3GetStaticDdrMode()] - if chipBoardRev = A0 : 3 * DDR3 Init.[ddr3GetStaticDdrMode()] - if chipBoardRev = B0 : 5 * DDR3 Init.[ddr3GetStaticDdrMode()] - if chipBoardRev = Z1 : 0 DDR3 Init.[ddr3GetStaticDdrMode()] - ddr3GetCpuFreq() : 3 DDR3 Init.[ddr3GetStaticDdrMode()] - ddr3GetFabOpt() : 5 i=0:ddr_modes[i]:cpuFreq[0003] fabFreq[0005] chipBoardRev[0005] DDR3 Init. - DUNIT_STATIC: DEFINED DDR3 Init. - AUTO_DETECTION_SUPPORT: UNDEFINED DDR3 Init. - MV88F78X60: DEFINED DDR3 Init. - DUNIT_SPD: UNDEFINED DDR3 Training Sequence - HW Training Procedure DDR3 Training Sequence - Switching XBAR Window to FastPath Window Buffalo : Over write the parameter 0x1538 -> 0x00000009 Buffalo : Over write the parameter 0x153C -> 0x0000000f DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED U-Boot 2011.12 (Oct 18 2013 - 04:32:11) Marvell version: 2012_Q4.2 Board: BUFFALO TeraStation =TS3400D= SoC: MV78230 B0 running 2 CPUs Custom configuration CPU: Marvell PJ4B (584) v7 (Rev 2) LE CPU 0 CPU @ 1333 [MHz] L2 @ 667 [MHz] TClock @ 250 [MHz] DDR @ 667 [MHz] DDR 32Bit Width, FastPath Memory Access DDR ECC Disabled DRAM: 1024 MiB Map: Code: 0x3fee9000:0x3ff9df78 BSS: 0x3ffef960 Stack: 0x3f9d8ef8 PageTable: 0x003e0000 Heap: 0x3f9d9000:0x3fee9000 NAND: 512 MiB MMC: MRVL_MMC: 0 SF: Detected MX25L8006E with page size 64 KiB, total 1 MiB PEX 0.0(0): Root Complex Interface, Detected Link X4, GEN 1.1 PEX 1.0(1): Root Complex Interface, Detected Link X1, GEN 2.0 u-boot envinit tval=fef96294 BOOTVER=0.17 FPU initialized to Run Fast Mode. USB 0: Host Mode USB 1: Host Mode USB 2: Host Mode sending BOOT_START Late init UCOM ID= 0 boardId=4 boot trigger=normal Marvell Serial ATA Adapter Integrated Sata device found Found adapter at bus 0, device 1 ... Scanning channels MAC Address : 10:6F:3F:xx:xx:8F boot drive not found. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 ** Bad partition 1 ** ** Bad partition 1 ** <> Wrong Image Format for bootm command ERROR: can't get kernel image! device nand0 , # parts = 1 #: name size offset mask_flags 0: nandubifs 0x000020000000 0x000000000000 0 active partition: nand0,0 - (nandubifs) 0x000020000000 @ 0x000000000000 defaults: mtdids : none mtdparts: none Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" Bad block table found at page 262080, version 0x01 Bad block table found at page 262016, version 0x01 UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 4088 UBI: number of bad PEBs: 8 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 4088 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 1/0 UBIFS: recovery needed UBIFS: recovery deferred UBIFS: mounted UBI device 0, volume 0, name "nandubifs" UBIFS: mounted read-only UBIFS: file system size: 511586304 bytes (499596 KiB, 487 MiB, 4029 LEBs) UBIFS: journal size: 25649152 bytes (25048 KiB, 24 MiB, 202 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: LZO UBIFS: reserved for root: 5182151 bytes (5060 KiB) Loading file 'uImage.buffalo' to addr 0x01200000 with size 3628464 (0x00375db0)... Done Loading file 'initrd.buffalo' to addr 0x02600000 with size 24320911 (0x01731b8f)... Done <> ## Booting kernel from Legacy Image at 01200000 ... Image Name: Linux-3.3.4 Created: 2014-11-10 20:24:08 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3628400 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02600000 ... Image Name: initramfs.cpio Created: 2014-11-10 20:30:14 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 24320847 Bytes = 23.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0 Initializing cgroup subsys cpu Linux version 3.3.4 (jenkins@tsbuild@buffalotech.com) (gcc version 4.6.4 (Linaro GCC branch-4.6.4. Marvell GCC release 201307-2123.0cc69bb4 ) ) #1 SMP Mon Nov 10 14:24:03 CST 2014 CPU: Marvell - PJ4Bv7 Processor [562f5842] revision 2 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine: Marvell Armada XP Development Board Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writealloc SMP: init cpus PERCPU: Embedded 7 pages/cpu @c0eee000 s6560 r8192 d13920 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243839 Kernel command line: console=ttyS0,115200 panic=5 mtdparts=armada-nand:-(nandubifs) ubi.mtd=1 BOOTVER=0.17 UBOOT_DATE=2013/10/18 nandboot=yes earlyprintk PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 959MB = 959MB total Memory: 943140k/943140k available, 39896k reserved, 114684K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xf5800000 - 0xff000000 ( 152 MB) lowmem : 0xc0000000 - 0xf5000000 ( 848 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc06b5000 (6836 kB) .init : 0xc06b5000 - 0xc06eb9a0 ( 219 kB) .data : 0xc06ec000 - 0xc0726f00 ( 236 kB) .bss : 0xc0726f24 - 0xc0767838 ( 259 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:211 Initializing ArmadaXP SOC Timer 0 sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 SMP: prepare CPUs (2 cores) SMP: CPU 0 Waking up CPU 1 Armada-XP Performance Monitor Unit detected (Marvell ID)!!! hw perfevents: enabled with Armada PJ4 PMU driver, 7 counters available Setting up static identity map for 0x4efe90 - 0x4efed4 CPU1: Booted secondary processor CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (2664.03 BogoMIPS). devtmpfs: initialized xor: measuring software checksum speed arm4regs : 1087.200 MB/sec 8regs : 957.600 MB/sec 32regs : 1184.000 MB/sec xor: using function: 32regs (1184.000 MB/sec) NET: Registered protocol family 16 L0 cache Enabled Speculative Prefetch Disabled aurora_l2_init Aurora: Enabling L2 Support IO coherency. Marvell Armada-XP BUFFALO TeraStation =TS3400D= Board - Soc: MV88F7823 Rev 2 LE Detected Tclk 250000000, SysClk 667000000, FabricClk 667000000, PClk 1333000000 LSP version: AXP_2.0.6 gpiochip_add: registered GPIOs 0 to 67 on device: mv_gpio LCD 0 disabled (0). registered dev#0 asa ehci_marvell Marvell USB EHCI Host controller #0: f4827f00 registered dev#1 asa ehci_marvell Marvell USB EHCI Host controller #1: f48b3000 registered dev#2 asa ehci_marvell Marvell USB EHCI Host controller #2: f48b3100 PCI-E: Cheking physical bus #0 (controller #0): Enabled - Link UP PCI-E: Cheking physical bus #1 (controller #4): Enabled - Link UP PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe1ffffff] PCI: bus0: Fast back to back transfers disabled PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [mem 0xe8000000-0xe9ffffff] PCI: bus1: Fast back to back transfers disabled pci 0000:01:01.0: BAR 0: assigned [mem 0xe8000000-0xe8001fff 64bit] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit] pci 0000:00:01.0: BAR 2: can't assign io (size 0x100) bio: create slab at 0 raid6: int32x1 153 MB/s raid6: int32x2 235 MB/s raid6: int32x4 220 MB/s raid6: int32x8 255 MB/s raid6: using algorithm int32x8 (255 MB/s) vgaarb: loaded SCSI subsystem initialized Switching to clocksource axp_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Trying to unpack rootfs image as initramfs... Freeing initrd memory: 23748K CESA test started: bufNum = 1, bufSize = 20000 Cesa Test Start: pMbufSrc=f4900000, pFragsSrc=f485c000, pMbufDst=f4900800, pFragsDst=f485e000 mvCesaInit: channels=2, session=32, queue=256 cesadev_init(c06bea24) Armada XP hwmon thermal sensor initialized. ArmadaXP Power Managament Suspend Operations Initialized Initializing Armada-XP CPU power management (WFI) MICON ctrl (C) BUFFALO INC. V.1.00 installed. Kernel event proc (C) BUFFALO INC. V.1.00 installed. MICON V2 (C) BUFFALO INC. V.2.00 installed.(IRQ=168) Error : NAK or Illegal Data Recived Error : NAK or Illegal Data Recived Error : NAK or Illegal Data Recived Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.1.00 installed. Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed. initial_polarity_val = 0x00000000 initial_polarity_val_high = 0x0000090f Buffalo GPIO SATA Hotplug Event Driver (C) BUFFALO INC. Ver.1.00 installed.-Polling mode- UPSDRV (C) BUFFALO INC. V.1.00 installed. BUFFALO UPS Recover Function Initialized. OMRON contact type ups shutdown support enabled! highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) nfs4filelayout_init: NFSv4 File Layout Driver Registering... Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.30 [Flags: R/O]. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.18) SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 1664 async_tx: api initialized (async) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Initializing ths8200_init Initializing dove_adi9889_init mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xd0012000 (irq = 41) is a 16550A console [ttyS0] enabled serial8250.3: ttyS1 at MMIO 0xd0012300 (irq = 44) is a 16550A serial8250.1: ttyS2 at MMIO 0xd0012100 (irq = 42) is a 16550A serial8250.2: ttyS3 at MMIO 0xd0012200 (irq = 43) is a 16550A brd: module loaded loop: module loaded ** BUFFALO Disable Command Queuing Function [sata_mv 0000:00:01.0] ** 704211ab 00100146 01000002 00000008 e0000004 00000000 ffffff01 00000000 00000000 00000000 00000000 11ab11ab 00000000 00000040 00000000 0000013a 00025001 00000000 00000000 00000000 00806005 00000000 00000000 00000000 00110010 00000081 sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx scsi0 : sata_mv scsi1 : sata_mv scsi2 : sata_mv scsi3 : sata_mv ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 58 ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 58 ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 58 ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 58 sata_mv sata_mv.0: cannot get clkdev ** BUFFALO Disable Command Queuing Function [sata_mv sata_mv.0] ** sata_mv sata_mv.0: slots 32 ports 2 scsi4 : sata_mv scsi5 : sata_mv ata5: SATA max UDMA/133 irq 55 ata6: SATA max UDMA/133 irq 55 INFO: Found spi_flash 0 - base 0xf0000000, size 0x1000000 INFO: flashInfoFill - Found 1 Flash Devices INFO: flash_map_init - detected 1 devices MTD: Initialize the spi_flash device at address 0xf0000000 INFO: Io remapped successfully - phy addr = 0xf0000000, virt addr = 0xfab00000 INFO: Using sflash to probe spi_flash at address 0xf0000000, size 0x1000000, width 2mSPI Serial flash detected @ 0xf0000000, 1024KB (16sec x 64KB) - detected OK - OK. armada-nand armada-nand.0: Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) Bad block table found at page 262080, version 0x01 Bad block table found at page 262016, version 0x01 1 cmdlinepart partitions found on MTD device armada-nand Creating 1 MTD partitions on "armada-nand": 0x000000000000-0x000020000000 : "nandubifs" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 ata1: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) UBI: max. sequence number: 3359 UBI: attached mtd1 to ubi0 UBI: MTD device name: "nandubifs" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 4088 UBI: number of bad PEBs: 8 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 4088 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 1/0 UBI: image sequence number: 596401107 UBI: background thread "ubi_bgt0d" started, PID 471 mv_eth_probe: port_mask=0xf, cpu_mask=0x3 0 - Base 0x00000000 , Size = 0x40000000. 4 - Base 0xf4000000 , Size = 0x00100000. 8 - Base 0xe0000000 , Size = 0x02000000. 10 - Base 0xe2000000 , Size = 0x02000000. 12 - Base 0xe4000000 , Size = 0x02000000. 14 - Base 0xe6000000 , Size = 0x02000000. 16 - Base 0xe8000000 , Size = 0x02000000. 20 - Base 0xea000000 , Size = 0x02000000. 24 - Base 0xec000000 , Size = 0x02000000. 26 - Base 0xee000000 , Size = 0x02000000. 28 - Base 0xd0000000 , Size = 0x00100000. 30 - Base 0xf0000000 , Size = 0x01000000. 38 - Base 0xfff00000 , Size = 0x00100000. 39 - Base 0xf2000000 , Size = 0x02000000. 41 - Base 0xc8010000 , Size = 0x00010000. 42 - Base 0xf4480000 , Size = 0x00010000. 43 - Base 0xf4500000 , Size = 0x00100000. o 2 Giga ports supported o NETA acceleration mode 2 o BM supported for CPU: 4 BM pools o RX Queue support: 1 Queues * 128 Descriptors o TX Queue support: 1 Queues * 532 Descriptors o GSO supported o GRO supported o Receive checksum offload supported o Transmit checksum offload supported o Driver ERROR statistics enabled o Loading network interface(s) o Port 0 is connected to Linux netdevice link down giga p=0: mtu=1500, mac=f483be6c ata4: SATA link down (SStatus 0 SControl 300) o eth0, ifindex = 2, GbE port = 0 o Port 1 is connected to Linux netdevice link down giga p=1: mtu=1500, mac=f483be6c o eth1, ifindex = 3, GbE port = 1 e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k e1000e: Copyright(c) 1999 - 2011 Intel Corporation. PPP generic driver version 2.4.2 NET: Registered protocol family 24 i2c /dev entries driver rtc-rs5c372 0-0032: rs5c372a found, 24hr, driver version 0.6 rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) Netfilter messages via NETLINK v0.30. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 5 Registering the dns_resolver key type VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 ata6: SATA link down (SStatus 0 SControl F300) Freeing init memory: 216K /init: line 9: /usr/sbin/depmod: No such file or directory ====== Entering initramfs(/init) ====== grep: /var/tmp/signatureinfo: No such file or directory grep: /var/tmp/signatureinfo: No such file or directory grep: /var/tmp/signatureinfo: No such file or directory grep: /var/tmp/signatureinfo: No such file or directory grep: /var/tmp/signatureinfo: No such file or directory grep: /var/tmp/signatureinfo: No such file or directory grep: /var/tmp/signatureinfo: No such file or directory grep: /var/tmp/signatureinfo: No such file or directory CANDIDATE_NUM=0 : CANDIDATE_LIST= Selecting disk with not considering signature CANDIDATE_NUM=0 : CANDIDATE_LIST= libsys: nas_feature : using /root/.nas_features/JP/0x0000201E Checking the existance of micon ... #[miconapl.mcon_get_version] mcon_version=TS-M Series V1.03 libsys: /etc/sysctl.conf : using /root/.params/sysctl/0x0000201E ls: /dev/rtc: No such file or directory libsys: /dev/rtc was updated : /dev/rtc 254 0 Wed Nov 14 00:15:54 2007 -0.991086 seconds Wed Nov 14 00:15:54 JST 2007 LibSys_GetUsbDiskStartNum : Usb device not found(/sys/block/sda/device). Returning 1 grep: /var/tmp/devlink: No such file or directory create_devlink:Using new routine. console panic mtdparts ubi.mtd BOOTVER UBOOT_DATE nandboot linuxrc:choose operation (timeout 4[s]) 1:RamRoot 2:NfsRoot 3:sda1 4:sda2 other:HddRoot ? ***** USB or NAND boot detected. ***** ***** Entering EM mode forcefully ***** -RamdiskRoot- --- rcStart (initrd) --- mount: mounting proc on /proc failed: Device or resource busy mount: mounting sysfs on /sys failed: Device or resource busy Cannot set device ring parameters: Operation not supported Cannot set device ring parameters: Operation not supported Cannot set device ring parameters: Operation not supported Cannot set device ring parameters: Operation not supported Cannot get device ring settings: No such device Cannot get device ring settings: No such device Cannot get device ring settings: No such device Cannot get device ring settings: No such device === checkroot.sh === grep: /var/tmp/devlink: No such file or directory create_devlink:Using new routine. Unable to find swap-space signature swapon: /dev/md2: Invalid argument /sbin/hotplug [block] /sbin/hotplug [bdi] create dir : /var/www === create_devlink.sh === create_devlink:Using new routine. === startSysMd.sh === -- rebuild mdadm.conf for BOOT, ROOTFS with Intelligent routine -- checkDiskStatus : disk1 unplugged checkDiskStatus : disk2 unplugged checkDiskStatus : disk3 unplugged checkDiskStatus : disk4 unplugged checkDiskPerformanceParallel : disk1 unplugged checkDiskPerformanceParallel : disk2 unplugged checkDiskPerformanceParallel : disk3 unplugged checkDiskPerformanceParallel : disk4 unplugged checkDiskPerformanceParallel : Waiting for performance check will be done(timeout=20). checkDiskPerformanceParallel : Disk which has performance lower than 30 MB/s will be kicked out. checkDiskPerformanceParallel : disk1 performance test skipped(unplugged) checkDiskPerformanceParallel : disk2 performance test skipped(unplugged) checkDiskPerformanceParallel : disk3 performance test skipped(unplugged) checkDiskPerformanceParallel : disk4 performance test skipped(unplugged) mount: mounting /dev/disk1_1 on /tmp/boot_test failed: No such file or directory mount: mounting /dev/disk2_1 on /tmp/boot_test failed: No such file or directory mount: mounting /dev/disk3_1 on /tmp/boot_test failed: No such file or directory mount: mounting /dev/disk4_1 on /tmp/boot_test failed: No such file or directory libmd: GetMdBaseDisk : Selected 0 mdadm: cannot open /dev/disk?_1: No such file or directory mdadm: cannot open /dev/disk??_1: No such file or directory mdadm: cannot open /dev/disk?_2: No such file or directory mdadm: cannot open /dev/disk??_2: No such file or directory mdadm: cannot open /dev/disk?_5: No such file or directory mdadm: cannot open /dev/disk??_5: No such file or directory mdadm: No devices listed in conf file were found. -- setup max error counts -- /sys/block/md0/md/maxerr_cnt is setted to 1000 /usr/local/lib/libmd: line 775: /sys/block/md0/md/maxerr_cnt: No such file or directory /sys/block/md1/md/maxerr_cnt is setted to 1000 /usr/local/lib/libmd: line 775: /sys/block/md1/md/maxerr_cnt: No such file or directory /sys/block/md2/md/maxerr_cnt is setted to 1000 /usr/local/bin/hdd_raid_syncspeed.sh: line 147: /sys/block/md0/md/sync_speed_max: No such file or directory /usr/local/bin/hdd_raid_syncspeed.sh: line 147: /sys/block/md1/md/sync_speed_max: No such file or directory /usr/local/bin/hdd_raid_syncspeed.sh: line 147: /sys/block/md2/md/sync_speed_max: No such file or directory === fwupdate.sh === umount: can't umount /boot: Invalid argument mkdir: can't create directory '/boot': File exists EXT3-fs (md0): error: unable to read superblock /sbin/hotplug [block] /sbin/hotplug [bdi] EXT2-fs (md0): error: unable to read superblock EXT4-fs (md0): unable to read superblock FAT-fs (md0): unable to read boot sector FAT-fs (md0): unable to read boot sector isofs_fill_super: bread failed, dev=md0, iso_blknum=16, block=32 /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [bdi] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [block] mount: mounting /dev/md0 on /boot failed: Input/output error === closeSysMd.sh === md: md0 stopped. mdadm: stopped /dev/md0 /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [bdi] /sbin/hotplug [block] md: md1 stopped. /sbin/hotplug [block] /sbin/hotplug [block] mdadm: stmd: md2 stopped. opped /dev/md1 /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [bdi] mdadm: stopped /dev/md2 === sethostname.sh === /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [block] configure files from Buffalo parameters. === restore_config.sh === -- rebuild mdadm.conf for BOOT -- mdadm: cannot open /dev/disk?_1: No such file or directory mdadm: cannot open /dev/disk??_1: No such file or directory mdadm: No devices listed in conf file were found. -- setup max error cEXT3-fs (md0): error: unable to read superblock ounts -- /sys/block/md0/md/maxerr_cnt is setted to 1000 /usr/local/lib/libmd: line 775: /sys/block/md0/md/maxerr_cnt: No such file or directory /sbin/hotplug [block] /sbin/hotplug [bdi] EXT2-fs (md0): error: unable to read superblock EXT4-fs (md0): unable to read superblock FAT-fs (md0): unable to read boot sector FAT-fs (md0): unable to read boot sector isofs_fill_super: bread failed, dev=md0, iso_blknum=16, block=32 /sbin/hotplug [bdi] /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [bdi] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [block] mount: mounting /dev/md0 on /boot failed: Input/output error Restore previous configuration files tar (child): /boot/conf_save.tgz: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now /bin/tar: Child returned status 2 /bin/tar: Error is not recoverable: exiting now tar (child): /boot/conf_save.tgz: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now /bin/tar: Child returned status 2 /bin/tar:md: md0 stopped. Error is not recoverable: exiting now unzip fail. /tmp/etc/localtime -> umount: can't umount /boot: Invalid argument rootfs on / type rootfs (rw,relatime) proc on /proc type proc (rw,relatime) sysfs on /sys type sysfs (rw,relatime)md: md1 stopped. devpts on /dev/pts type devpts (rw,relatime,gid=4,mode=620) /dev/ram1 on /mnt/ram type tmpfs (rw,relatime,size=15360k) PID USER COMMAND 1 root init 2 root [kthreadd] 3 root [ksoftirqd/0] 4 root [kworker/0:0] 5 root [kworker/u:0] 6 root [migration/0] 7 root [migramd: md2 stopped. tion/1] 8 root [kworker/1:0] 9 root [ksoftirqd/1] 10 root [khelper] 11 root [kdevtmpfs] 12 root [kworker/u:1] 154 root [sync_supers] 156 root [bdi-default] 158 root [kblockd] 165 root [ata_sff] 175 root [md] 195 root [rpciod] 196 root [kworker/0:1] 212 root [kswapd0] 263 root [fsnotify_mark] 280 root [nfsiod] 299 root [xfs_mru_cache] 300 root [xfslogd] 301 root [xfsdatad] 302 root [xfsconvertd] 304 root [crypto] 415 root [scsi_eh_0] 418 root [scsi_eh_1] 421 root [scsi_eh_2] 424 root [scsi_eh_3] 427 root [kworker/u:2] 428 root [kworker/u:3] 429 root [kworker/u:4] 430 root [kworker/u:5] 438 root [scsi_eh_4] 441 root [scsi_eh_5] 444 root [kworker/u:6] 445 root [kworker/u:7] 456 root [mtdblock0] 462 root [mtdblock1] 468 root [kworker/1:1] 471 root [ubi_bgt0d] 742 root {rcS} /bin/sh /etc/init.d/rcS 1127 root [kworker/0:2] 1164 root {restore_config.} /bin/sh /etc/init.d/restore_config.sh start 1208 root ps mdadm: stopped /dev/md0 /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [block] mdadm: stopped /dev/md1 /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [bdi] /sbin/hotplug [block] /sbin/hotplug [bdi] mdadm: stopped /dev/md2 /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [block] /sbin/hotplug [bdi] grep: /etc/melco/iscsi_info: No such file or directory Can't open /etc/melco/iscsi_info: No such file or directory. === EnablingAutoip.sh === === networking.sh === /etc/init.d/networking.sh : Clear /etc/dhcpc/dhcpcd-eth0.pid eth0 /etc/init.d/networking.sh : Clear /etc/dhcpc/dhcpcd-eth1.pid eth1 /etc/init.d/networking.sh : Clear /etc/dhcpc/dhcpcd-bond0.pid bond0 /etc/init.d/networking.sh : Read dhcpc file /etc/init.d/networking.sh : configure : create network files.. (eth0) IP=[dhcp], netmask=[], dgw=[], dns1=[], dns2=[] create network files.. (eth1) IP=[dhcp], netmask=[], dgw=[] killall: dhcpcd: no process killed /etc/init.d/networking.sh: line 91: /etc/init.d/networking.sh : Delete /etc/dhcpc/dhcpcd-.pid: No such file or directory Configuration network interface: lo eth0 eth1 /sbin/ifconfig eth0 mtu 1500 multicast /sbin/ifconfig eth1 mtu 1500 multicast requesting DHCP tout=30[s] networking.sh: dhcp requesting... DontDownIfacepool #1: pkt_size=1536, buf_size=1600 - 2048 of 2048 buffers added alwaysFork eth1: started ** eth1 : networking.sh dhcp fin. requesting DHCP tout=30[s] networking.sh: dhcp requesting... SIOCGIFADDR :Cannot assign requested address Dopool #0: pkt_size=1536, buf_size=1600 - 2048 of 2048 buffers added ntDownIface alweth0: started aysFork sendto: count 6 sync 1 sendto: count 5 sync 1 ** eth0 : networking.sh dhcp fin. Waiting 1294 ...sendto: count 6 sync 1 sendto: count 4 sync 1 sendto: count 5 sync 1 sendto: count 3 sync 1 sendto: count 4 sync 1 sendto: count 2 sync 1 sendto: count 3 sync 1 sendto: count 1 sync 1 sendto: count 2 sync 1 sendto: count 0 sync 1 dhcpInit call AutoipBound setAutoIP eth1 called MAC address = 10:6f:3f:xx:xx:8f file name /etc/dhcpc/autoip-eth1.info /sbin/ifconfig eth1 169.254.242.46 netmask 255.255.0.0 up sendto: count 1 sync 1 sendto: count 0 sync 1 dhcpInit call AutoipBound setAutoIP eth0 called MAC address = 10:6f:3f:xx:xx:8e file name /etc/dhcpc/autoip-eth0.info /sbin/ifconfig eth0 169.254.136.74 netmask 255.255.0.0 up Arp result 0 /etc/init.d/rService finished. Waiting 1298 ...Arp result 0 /etc/init.d/rService finished. Checking network address for each network device Warn!!! eth0 and eth1 has same network address! Waiting fot linkup detection ..........networking.sh: Each network is not same in physically(or virtually). networking.sh: Shutting down eth1 eth1: stopped eth1: started networking.sh: arp_newip_notify_sub : executing arping -A 169.254.136.74 -I eth0 -c 1 networking.sh: arp_newip_notify_sub : Can't get ipaddr of eth1. add default if configure files from Buffalo parameters. === syslog.sh === using /sbin/syslogd using /sbin/klogd Starting system logger: load_info ItemValue = off LoadConfFileStringEx:key=[ad_dns] not found in /etc/melco/info. LoadConfFileOnOffEx:key=[info_visible] not found in /etc/melco/info. LoadConfFileStringEx:key=[array2] not found in /etc/melco/diskinfo. LoadConfFileStringEx:key=[disk3] not found in /etc/melco/diskinfo. LoadConfFileStringEx:key=[disk4] not found in /etc/melco/diskinfo. LoadConfFileStringEx:key=[usb_disk3] not found in /etc/melco/diskinfo. LoadConfFileStringEx:key=[usb_disk4] not found in /etc/melco/diskinfo. LoadConfFileOnOffEx:key=[smb2] not found in /etc/melco/info. LoadConfFileOnOffEx:key=[recycle_admin] not found in /etc/melco/info. LoadConfFileOnOffEx:key=[recycle_macinfo] not found in /etc/melco/info. Starting kernel logger: === kernelmon.sh === Starting kernelmon:=== miconmon.sh === KERNELMOn (SATA 0 unplugged) KERNELMOn (SATA 1 unplugged) KERNELMOn (SATA 2 unplugged) KERNELMOn (SATA 3 unplugged) KERNELMOn (lanact 0 half eth0) === usb.sh === /etc/init.d/usb.sh: line 97: depmod: command not found /sbin/hotplug [module] /sbin/hotplug [module] /sbin/hotplug [bus] usbcore: registered new interface driver usbfs /sbin/hotplug [drivers] /sbin/hotplug [class] usbcore: registered new interface driver hub /sbin/hotplug [drivers] KERNELMOn (lanacusbcore: registered new device driver usb t 0 half eth1) /sbin/hotplug [drivers] xhci_hcd 0000:01:01.0: xHCI Host Controller xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 1 /sbin/hotplug [module] xhci_hcd 0000:01:01.0: irq 62, io mem 0xe8000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 3.3.4 xhci_hcd usb usb1: SerialNumber: 0000:01:01.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected /sbin/hotplug [usb] xhci_hcd 0000:01:01.0: xHCI Host Controller xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 2 /sbin/hotplug [uusb usb2: New USB device found, idVendor=1d6b, idProduct=0003 sb_device] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 3.3.4 xhci_hcd /sbin/hotplug [uusb usb2: SerialNumber: 0000:01:01.0 sb] hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected /sbin/hotplug [usb] /sbin/hotplug [usb] /sbin/hotplug [usb_device] /sbin/hotplug [drivers] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_marvell ehci_marvell.0: Marvell Orion EHCI ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 3 /sbin/hotplug [module] ehci_marvell ehci_marvell.0: irq 45, io base 0xfbb50100 ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: Marvell Orion EHCI usb usb3: Manufacturer: Linux 3.3.4 ehci_hcd usb usb3: SerialNumber: ehci_marvell.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected /sbin/hotplug [usb] /sbin/hotplug [usb] ehci_marvell ehci_marvell.1: Marvell Orion EHCI ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 4 /sbin/hotplug [usb_device] ehci_marvell ehci_marvell.1: irq 46, io base 0xfbb51100 ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: Marvell Orion EHCI usb usb4: Manufacturer: Linux 3.3.4 ehci_hcd usb usb4: SerialNumber: ehci_marvell.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected /sbin/hotplug [usb] /sbin/hotplug [usb] ehci_marvell ehci_marvell.2: Marvell Orion EHCI ehci_marvell ehci_marvell.2: new USB bus registered, assigned bus number 5 /sbin/hotplug [usb_device] ehci_marvell ehci_marvell.2: irq 47, io base 0xfbb52100 ehci_marvell ehci_marvell.2: USB 2.0 started, EHCI 1.00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: Marvell Orion EHCI usb usb5: Manufacturer: Linux 3.3.4 ehci_hcd usb usb5: SerialNumber: ehci_marvell.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected /sbin/hotplug [usb] /sbin/hotplug [usb] /sbin/hotplug [usb_device] /sbin/hotplug [drivers] /sbin/hotplug [drivers] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver /sbin/hotplug [module] /sbin/hotplug [drivers] uhci_hcd: USB Universal Host Controller Interface driver /sbin/hotplug [module] /sbin/hotplug [drivers] usbcore: registered new interface driver libusual /sbin/hotplug [module] /sbin/hotplug [module] Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. /sbin/hotplug [drivers] usbcore: registered new interface driver usblp /sbin/hotplug [module] /sbin/hotplug [drivers] usbcore: registered new interface driver usbhid usbhid: USB HID core driver /sbin/hotplug [module] /sbin/hotplug [drivers] /sbin/hotplug [drivers] grep: /etc/melco/usbshareinfo: No such file or directory /usr/local/lib/libsys: line 1154: sqlite3: command not found grep: /etc/melco/usbshareinfo: No such file or directory /usr/local/lib/libsys: line 1154: sqlite3: command not found grep: /etc/melco/usbshareinfo: No such file or directory /usr/local/lib/libsys: line 1154: sqlite3: command not found grep: /etc/melco/usbshareinfo: No such file or directory /usr/local/lib/libsys: line 1154: sqlite3: command not found /usr/local/lib/libsys: line 1179: sqlite3: command not found /usr/local/lib/libsys: line 1179: sqlite3: command not found /usr/local/lib/libsys: line 1179: sqlite3: command not found /usr/local/lib/libsys: line 1179: sqlite3: command not found /usr/local/lib/libsys: line 1191: sqlite3: command not found /usr/local/lib/libsys: line 1191: sqlite3: command not found /usr/local/lib/libsys: line 1191: sqlite3: command not found /usr/local/lib/libsys: line 1191: sqlite3: command not found === clientUtil_servd.sh === Starting clientUtil_server: ->Starting on eth1 ->Starting on eth0 === daemonwatch.sh === === bootcomplete.sh === No need to run drivecheck.sh BuffaloGpio_ChangePowerStatus > Writing 0x71 /usr/local/bin/hdd_raid_syncspeed.sh: line 147: /sys/block/md0/md/sync_speed_max: No such file or directory /usr/local/bin/hdd_raid_syncspeed.sh: line 147: /sys/block/md1/md/sync_speed_max: No such file or directory /usr/local/bin/hdd_raid_syncspeed.sh: line 147: /sys/block/md2/md/sync_speed_max: No such file or directory hdd_raid_syncspeed.sh: Adding EDP md devices hdd_raid_syncspeed.sh: USERLAND_MD=md10 md11 md12 md13 md14 md20 md21 md22 md23 md24 md101 md102 md103 md104 === micon_setup.sh === SIOCGIFADDR :Cannot assign requested address /usr/local/bin/change_notify.sh:RAIDMODE on LCD is not supported on this model. === late_inspection_phase.sh === === buffalo_rescue.sh === BuffaloGpio_ChangePowerStatus > Writing 0x71 shutdown_start.sh #4: miconapl -a shutdown_wait done. eth0: stopped eth1: stopped /sbin/hotplug [bdi] /sbin/hotplug [block] The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff Shutting Down Marvell Ethernet Driver System halted. port 0 : Magic mode WoL disabled. port 1 : Magic mode WoL disabled. micon : Disabling WOL... >miconCntl_WolDisable >miconCntl_PowerOff >miconCntl_ShutdownWait
