OpenWrtでサポートできそうなデバイスが無いか、インターネットを徘徊していて見つけたもの。
中国語の情報が先行情報としていくらか出ているので、中古がかなり安いしとりあえず確保してみることにした。
弄っていくのでメモ。
Switch, PHY
未確認
MAC
未確認
Bootloader
helpIPQ807x# help ? - alias for 'help' aes_256 - AES 256 CBC/ECB encryption/decryption aq_load_fw- LOAD aq-fw-binary aq_phy_restart- Restart Aquantia phy base - print or set address offset bdinfo - print Board Info structure bootipq - bootipq from flash device bootipq_usb- bootipq from usb device bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol bootz - boot Linux zImage image from memory canary - test stack canary chpart - change active partition cmp - memory compare cp - memory copy crc32 - checksum calculation dcache - enable or disable data cache dhcp - boot image via network using DHCP/TFTP protocol dm - Driver model low level access echo - echo args to console env - environment handling commands erase - erase FLASH memory exectzt - execute TZT exit - exit script ext4load- load binary file from a Ext4 filesystem ext4ls - list files in a directory (default /) ext4size- determine a file's size false - do nothing, unsuccessfully fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) fatsize - determine a file's size fdt - flattened device tree utility commands flash - flash part_name flash part_name load_addr file_size flasherase- flerase part_name flinfo - print FLASH memory information fuseipq - fuse QFPROM registers from memory go - start application at address 'addr' help - print command description/usage i2c - I2C sub-system icache - enable or disable instruction cache imxtract- extract a part of a multi-image ipq_mdio- IPQ mdio utility commands is_sec_boot_enabled- check secure boot fuse is enabled or not itest - return true/false on integer compare loop - infinite loop on address range md - memory display mii - MII utility commands mm - memory modify (auto-incrementing address) mmc - MMC sub system mmcinfo - display MMC info mtdparts- define flash/nand partitions mtest - simple RAM read/write test mw - memory write (fill) nand - NAND sub-system nboot - boot from NAND device nm - memory modify (constant address) pci - list and access PCI Configuration Space ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables protect - enable or disable FLASH write protection reset - Perform RESET of the CPU run - run commands in an environment variable runmulticore- Enable and schedule secondary cores saveenv - save environment variables to persistent storage secure_authenticate- authenticate the signed image setenv - set environment variables sf - SPI flash sub-system showvar - print local hushshell variables sleep - delay execution for some time smeminfo- print SMEM FLASH information source - run script from memory test - minimal test like /bin/sh tftpboot- boot image via network using TFTP protocol tftpput - TFTP put command, for uploading files to a server true - do nothing, successfully uart - UART sub-system ubi - ubi commands usb - USB sub-system usbboot - boot from USB device version - print monitor, compiler and linker versionversionIPQ807x# version U-Boot 2016.01 (Oct 26 2021 - 17:26:18 +0800) arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 5.2.0 fa2f68a+r49254) 5.2.0 GNU ld (GNU Binutils) 2.24.0bdinfoIPQ807x# bdinfo arch_number = 0x08010008 boot_params = 0x40000100 DRAM bank = 0x00000000 -> start = 0x40000000 -> size = 0x20000000 eth0name = eth0 ethaddr = 00:03:7f:ba:db:ad current eth = eth0 ip_addr = 192.168.10.10 baudrate = 115200 bps TLB addr = 0x4A9D0000 relocaddr = 0x4A900000 reloc off = 0x00000000 irq_sp = 0x4A77FA90 sp start = 0x4A77FA80smeminfoIPQ807x# smeminfo flash_type: 0x6 flash_index: 0x0 flash_chip_select: 0x0 flash_block_size: 0x10000 flash_density: 0x1000000 partition table offset 0x0 No.: Name Attributes Start Size 0: 0:SBL1 0x0000ffff 0x0 0x40000 1: 0:MIBIB 0x001040ff 0x40000 0x10000 2: 0:QSEE 0x0000ffff 0x50000 0x160000 3: 0:DEVCFG 0x0000ffff 0x1b0000 0x10000 4: 0:RPM 0x0000ffff 0x1c0000 0x20000 5: 0:CDT 0x0000ffff 0x1e0000 0x10000 6: 0:APPSBLENV 0x0000ffff 0x1f0000 0x10000 7: 0:APPSBL 0x0000ffff 0x200000 0xa0000 8: 0:ART 0x0000ffff 0x2a0000 0x40000 9: 0:OEM 0x0000ffff 0x2e0000 0x10000 10: 0:CRASH 0x0000ffff 0x2f0000 0x20000nand infoIPQ807x# nand info Device 1: 17x nand1, sector size 4 KiB Page size 256 b OOB size 0 b Erase size 4096 b subpagesize 1251414100 b options 0x65746172 bbt options 0x 0printenvIPQ807x# printenv baudrate=115200 bootargs=console=ttyMSM0,115200n8 loglevel=0 bootcmd=bootipq_usb bootdelay=2 ethact=eth0 ethaddr=00:03:7f:ba:db:ad fdt_high=0x4A400000 fdtcontroladdr=4a976500 fileaddr=44000000 filesize=18d45bc flash_type=8 ipaddr=192.168.10.10 machid=8010008 mtdids=nand1=spi0.0 nand_erasesize=1000 nand_oobsize=0 nand_writesize=100 netmask=255.255.255.0 serverip=192.168.10.1 soc_hw_version=200d0200 soc_version_major=2 soc_version_minor=0 stderr=serial@78B3000 stdin=serial@78B3000 stdout=serial@78B3000 Environment size: 557/65532 bytestftpbootIPQ807x# tftpboot ipq807x_eth_halt: done eth0 PHY0 Down Speed :10 Half duplex eth0 PHY1 Down Speed :10 Half duplex eth0 PHY2 Down Speed :10 Half duplex eth0 PHY3 Down Speed :10 Half duplex eth0 PHY4 up Speed :10 Full duplex eth0 PHY5 up Speed :10 Full duplex ipq807x_eth_init: done *** Warning: no boot file name; using 'C0A80A0A.img' Using eth0 device TFTP from server 192.168.10.1; our IP address is 192.168.10.10 Filename 'C0A80A0A.img'. Load address: 0x44000000 Loading:is_sec_boot_enabledIPQ807x# is_sec_boot_enabled secure boot fuse is not enabledusb *KernelはUSBで接続されているストレージから読み出しているようである
このストレージは、名前からしてどうもSDX55側のMTPモードを利用している雰囲気がある。ただし、コマンド操作でアクセスしようとするとタイミングが悪いのか
usb infoで検出しないことが度々ある（bootipq_usb内では一定時間ディレイを挟んでいるかも）IPQ807x# usb start IPQ807x# usb reset resetting USB... IPQ807x# usb info 1: Hub, USB Revision 3.0 - U-Boot XHCI Host Controller - Class: Hub - PacketSize: 9 Configurations: 1 - Vendor: 0x0000 Product 0x0000 Version 1.0 Configuration: 1 - Interfaces: 1 Self Powered 0mA Interface: 0 - Alternate Setting 0, Endpoints: 1 - Class Hub - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms 1: Hub, USB Revision 3.0 - U-Boot XHCI Host Controller - Class: Hub - PacketSize: 9 Configurations: 1 - Vendor: 0x0000 Product 0x0000 Version 1.0 Configuration: 1 - Interfaces: 1 Self Powered 0mA Interface: 0 - Alternate Setting 0, Endpoints: 1 - Class Hub - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms 2: Mass Storage, USB Revision 2.10 - QCOM SDXPRAIRIE-MTP _SN:436B307A 436b307a - Class: (from Interface) Mass Storage - PacketSize: 64 Configurations: 1 - Vendor: 0x05c6 Product 0xf000 Version 4.20 Configuration: 1 - Interfaces: 1 Bus Powered 500mA - String: "MS" Interface: 0 - Alternate Setting 0, Endpoints: 2 - Class Mass Storage, Transp. SCSI, Bulk only - String: "Mass Storage" - Endpoint 1 In Bulk MaxPacket 512 - Endpoint 1 Out Bulk MaxPacket 512 IPQ807x# usb tree USB device tree: 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (480 Mb/s, 500mA) QCOM SDXPRAIRIE-MTP _SN:436B307A 436b307a IPQ807x# usb dev USB device -1: device type unknown IPQ807x# usb part Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type IPQ807x# usb storage Device 0: Vendor: Linux Rev: 0414 Prod: File-Stor Gadget Type: Removable Hard Disk Capacity: 29.0 MB = 0.0 GB (59392 x 512)fat* usb 0:0IPQ807x# fatinfo usb 0:0 Interface: USB Device 0: Vendor: Linux Rev: 0414 Prod: File-Stor Gadget Type: Removable Hard Disk Capacity: 29.0 MB = 0.0 GB (59392 x 512) Filesystem: FAT16 "NO NAME " IPQ807x# fatls usb 0:0 28071196 uimage-initramfs.itb 1 file(s), 0 dir(s)
Kernel
パスワードが設定されているから代わりにfailsafe
ただしWDTの影響か3分前後で勝手にリセットが掛かり、再起動される
uname -aroot@(none):/# uname -a Linux (none) 4.4.60 #2 SMP PREEMPT Wed Aug 2 18:42:52 CST 2023 aarch64 GNU/Linuxcat /proc/versionroot@(none):/# cat /proc/version Linux version 4.4.60 (cpebuild@ubuntu-45-11) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 9af9c46+r49254) ) #2 SMP PREEMPT Wed Aug 2 18:42:52 CST 2023cat /proc/cmdlineroot@(none):/# cat /proc/cmdline console=ttyMSM0,115200n8 loglevel=0 swiotlb=1 coherent_pool=2Mcat /proc/cpuinforoot@(none):/# cat /proc/cpuinfo processor : 0 BogoMIPS : 38.40 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 38.40 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 38.40 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 38.40 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 Hardware : Qualcomm Technologies, Inc. IPQ807x/AP-HK09cat /proc/meminforoot@(none):/# cat /proc/meminfo MemTotal: 408668 kB MemFree: 256560 kB MemAvailable: 336880 kB Buffers: 0 kB Cached: 84120 kB SwapCached: 0 kB Active: 10540 kB Inactive: 74124 kB Active(anon): 548 kB Inactive(anon): 16 kB Active(file): 9992 kB Inactive(file): 74108 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 568 kB Mapped: 1312 kB Shmem: 20 kB Slab: 13960 kB SReclaimable: 4920 kB SUnreclaim: 9040 kB KernelStack: 1568 kB PageTables: 88 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 204332 kB Committed_AS: 628 kB VmallocTotal: 258998208 kB VmallocUsed: 0 kB VmallocChunk: 0 kBcat /proc/mtdroot@(none):/# cat /proc/mtd dev: size erasesize name mtd0: 00040000 00010000 "0:SBL1" mtd1: 00010000 00010000 "0:MIBIB" mtd2: 00160000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:DEVCFG" mtd4: 00020000 00010000 "0:RPM" mtd5: 00010000 00010000 "0:CDT" mtd6: 00010000 00010000 "0:APPSBLENV" mtd7: 000a0000 00010000 "0:APPSBL" mtd8: 00040000 00010000 "0:ART" mtd9: 00010000 00010000 "0:OEM" mtd10: 00020000 00010000 "0:CRASH"cat /proc/partitionsroot@(none):/# cat /proc/partitions major minor #blocks name 1 0 4096 ram0 1 1 4096 ram1 1 2 4096 ram2 1 3 4096 ram3 1 4 4096 ram4 1 5 4096 ram5 1 6 4096 ram6 1 7 4096 ram7 1 8 4096 ram8 1 9 4096 ram9 1 10 4096 ram10 1 11 4096 ram11 1 12 4096 ram12 1 13 4096 ram13 1 14 4096 ram14 1 15 4096 ram15 31 0 256 mtdblock0 31 1 64 mtdblock1 31 2 1408 mtdblock2 31 3 64 mtdblock3 31 4 128 mtdblock4 31 5 64 mtdblock5 31 6 64 mtdblock6 31 7 640 mtdblock7 31 8 256 mtdblock8 31 9 64 mtdblock9 31 10 128 mtdblock10ubinfo -aroot@(none):/# ubinfo -a UBI version: 1 Count of UBI devices: 0 UBI control device major/minor: 10:56strings /dev/mtdblock6root@(none):/# strings /dev/mtdblock6 @baudrate=115200 bootdelay=2 ethact=eth0 ethaddr=00:03:7f:ba:db:ad fdt_high=0x4A400000 fdtcontroladdr=4a976480 fileaddr=44000000 filesize=18d45bc flash_type=8 ipaddr=192.168.10.10 machid=8010008 mtdids=nand1=spi0.0 netmask=255.255.255.0 serverip=192.168.10.1 soc_hw_version=200d0200 soc_version_major=2 soc_version_minor=0 stderr=serial@78B3000 stdin=serial@78B3000 stdout=serial@78B3000 bootcmd=bootipq_usb bootargs=console=ttyMSM0,115200n8 loglevel=0 ok_image=17bda96be656cfd633539c226b68039d.itb =ttyMSM0,115200n8 otipq_usbhexdump -n 1024 -C /dev/mtdblock6root@(none):/# hexdump -n 1024 -C /dev/mtdblock6 00000000 31 5f 0e 40 62 61 75 64 72 61 74 65 3d 31 31 35 |1_.@baudrate=115| 00000010 32 30 30 00 62 6f 6f 74 64 65 6c 61 79 3d 32 00 |200.bootdelay=2.| 00000020 65 74 68 61 63 74 3d 65 74 68 30 00 65 74 68 61 |ethact=eth0.etha| 00000030 64 64 72 3d 30 30 3a 30 33 3a 37 66 3a 62 61 3a |ddr=00:03:7f:ba:| 00000040 64 62 3a 61 64 00 66 64 74 5f 68 69 67 68 3d 30 |db:ad.fdt_high=0| 00000050 78 34 41 34 30 30 30 30 30 00 66 64 74 63 6f 6e |x4A400000.fdtcon| 00000060 74 72 6f 6c 61 64 64 72 3d 34 61 39 37 36 34 38 |troladdr=4a97648| 00000070 30 00 66 69 6c 65 61 64 64 72 3d 34 34 30 30 30 |0.fileaddr=44000| 00000080 30 30 30 00 66 69 6c 65 73 69 7a 65 3d 31 38 64 |000.filesize=18d| 00000090 34 35 62 63 00 66 6c 61 73 68 5f 74 79 70 65 3d |45bc.flash_type=| 000000a0 38 00 69 70 61 64 64 72 3d 31 39 32 2e 31 36 38 |8.ipaddr=192.168| 000000b0 2e 31 30 2e 31 30 00 6d 61 63 68 69 64 3d 38 30 |.10.10.machid=80| 000000c0 31 30 30 30 38 00 6d 74 64 69 64 73 3d 6e 61 6e |10008.mtdids=nan| 000000d0 64 31 3d 73 70 69 30 2e 30 00 6e 65 74 6d 61 73 |d1=spi0.0.netmas| 000000e0 6b 3d 32 35 35 2e 32 35 35 2e 32 35 35 2e 30 00 |k=255.255.255.0.| 000000f0 73 65 72 76 65 72 69 70 3d 31 39 32 2e 31 36 38 |serverip=192.168| 00000100 2e 31 30 2e 31 00 73 6f 63 5f 68 77 5f 76 65 72 |.10.1.soc_hw_ver| 00000110 73 69 6f 6e 3d 32 30 30 64 30 32 30 30 00 73 6f |sion=200d0200.so| 00000120 63 5f 76 65 72 73 69 6f 6e 5f 6d 61 6a 6f 72 3d |c_version_major=| 00000130 32 00 73 6f 63 5f 76 65 72 73 69 6f 6e 5f 6d 69 |2.soc_version_mi| 00000140 6e 6f 72 3d 30 00 73 74 64 65 72 72 3d 73 65 72 |nor=0.stderr=ser| 00000150 69 61 6c 40 37 38 42 33 30 30 30 00 73 74 64 69 |ial@78B3000.stdi| 00000160 6e 3d 73 65 72 69 61 6c 40 37 38 42 33 30 30 30 |n=serial@78B3000| 00000170 00 73 74 64 6f 75 74 3d 73 65 72 69 61 6c 40 37 |.stdout=serial@7| 00000180 38 42 33 30 30 30 00 62 6f 6f 74 63 6d 64 3d 62 |8B3000.bootcmd=b| 00000190 6f 6f 74 69 70 71 5f 75 73 62 00 62 6f 6f 74 61 |ootipq_usb.boota| 000001a0 72 67 73 3d 63 6f 6e 73 6f 6c 65 3d 74 74 79 4d |rgs=console=ttyM| 000001b0 53 4d 30 2c 31 31 35 32 30 30 6e 38 20 6c 6f 67 |SM0,115200n8 log| 000001c0 6c 65 76 65 6c 3d 30 00 00 00 6f 6b 5f 69 6d 61 |level=0...ok_ima| 000001d0 67 65 3d 31 37 62 64 61 39 36 62 65 36 35 36 63 |ge=17bda96be656c| 000001e0 66 64 36 33 33 35 33 39 63 32 32 36 62 36 38 30 |fd633539c226b680| 000001f0 33 39 64 2e 69 74 62 00 00 3d 74 74 79 4d 53 4d |39d.itb..=ttyMSM| 00000200 30 2c 31 31 35 32 30 30 6e 38 00 00 6f 74 69 70 |0,115200n8..otip| 00000210 71 5f 75 73 62 00 00 00 00 00 00 00 00 00 00 00 |q_usb...........| 00000220 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000400
bootlog (
loglevel=0)Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Sending udev events over mhi-uci WIFI FW mount is successful /lib/firmware/qca-nss0.bin 33 /lib/firmware/qca-nss1.bin 33 acfg_tool: Issuing blocking call to wait for events **** Platform Name: ap-hk09 ***** Copy ART caldata from /dev/mtdblock8 to /tmp/virtual_art.bin qcawifi configuration is disable -------------------------------------------------------------------- ---------------------------Welcome To Cli--------------------------- --SBAir5, CKB01_11.B.003_293_202308021758, 10:71:FA:69:F0:5B-- -------------------------------------------------------------------- Login: Mode Switch:LTE Only mode attached flag = <FALSE> Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 1 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 2 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 3 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 4 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 5 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 6 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 7 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 8 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 9 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 10 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:RSRP Check Start Mode Switch:5G RSRP check count 1.<->,<-110> Mode Switch:Current RSRP check count 1.<->,<-128> Mode Switch:wait 1 minute(s)bootlog (
loglevel無し)PCI Link Intialized ** Invalid partition 1 ** [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.60 (cpebuild@ubuntu-45-11) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 9af9c46+r49254) ) #2 SMP PREEMPT Wed Aug 2 18:42:52 CST 2023 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Ignoring memory range 0x40000000 - 0x41000000 [ 0.000000] Machine: Qualcomm Technologies, Inc. IPQ807x/AP-HK09 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc01ef46000 s20992 r8192 d32256 u61440 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 107352 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 swiotlb=1 coherent_pool=2M [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] software IO TLB [mem 0x5fe41000-0x5fe81000] (0MB) mapped at [ffffffc01ee41000-ffffffc01ee80fff] [ 0.000000] Memory: 390044K/436224K available (5644K kernel code, 643K rwdata, 2388K rodata, 18580K init, 519K bss, 46180K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc0800000 ( 7 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc01f000000 ( 496 MB) [ 0.000000] .init : 0xffffffc00085a000 - 0xffffffc001a7f000 ( 18580 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc00085a000 ( 8040 KB) [ 0.000000] .data : 0xffffffc001a8e000 - 0xffffffc001b2ee00 ( 644 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000468] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000479] pid_max: default: 32768 minimum: 301 [ 0.000581] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000591] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.001158] Initializing cgroup subsys io [ 0.001176] Initializing cgroup subsys memory [ 0.001203] Initializing cgroup subsys devices [ 0.001215] Initializing cgroup subsys freezer [ 0.001227] Initializing cgroup subsys net_cls [ 0.001236] Initializing cgroup subsys pids [ 0.001491] EFI services will not be available. [ 0.001517] ASID allocator initialised with 65536 entries [ 0.052136] MSM Memory Dump base table set up [ 0.052163] MSM Memory Dump apps data table set up [ 0.090066] Detected VIPT I-cache on CPU1 [ 0.090114] CPU1: Booted secondary processor [410fd034] [ 0.120048] Detected VIPT I-cache on CPU2 [ 0.120077] CPU2: Booted secondary processor [410fd034] [ 0.150078] Detected VIPT I-cache on CPU3 [ 0.150106] CPU3: Booted secondary processor [410fd034] [ 0.150160] Brought up 4 CPUs [ 0.150187] SMP: Total of 4 processors activated. [ 0.150197] CPU: All CPU(s) started at EL1 [ 0.150220] alternatives: patching kernel code [ 0.169445] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.169474] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.169829] pinctrl core: initialized pinctrl subsystem [ 0.171006] NET: Registered protocol family 16 [ 0.200026] cpuidle: using governor ladder [ 0.230043] cpuidle: using governor menu [ 0.230252] NET: Registered protocol family 42 [ 0.230315] vdso: 2 pages (1 code @ ffffffc001a95000, 1 data @ ffffffc001a94000) [ 0.230345] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.231245] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.231377] CPU: IPQ8072A, SoC Version: 2.0 [ 0.231798] IPC logging disabled [ 0.231804] IPC logging disabled [ 0.231809] IPC logging disabled [ 0.231814] IPC logging disabled [ 0.231818] IPC logging disabled [ 0.234370] Soc version is not 1, changing clock offsets [ 0.243342] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.245714] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! [ 0.248990] sps:sps is ready. [ 0.254749] spmi spmi-0: PMIC Arb Version-2 (0x20010000) [ 0.261585] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.261899] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 [ 0.292125] pps_core: LinuxPPS API ver. 1 registered [ 0.292133] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.292156] PTP clock support registered [ 0.293595] Advanced Linux Sound Architecture Driver Initialized. [ 0.294226] clocksource: Switched to clocksource arch_sys_counter [ 0.297454] NET: Registered protocol family 2 [ 0.298234] default registered [ 0.298242] default registered [ 0.298248] MPTCP: Stable release v0.92 [ 0.298288] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.298352] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.298449] TCP: Hash tables configured (established 4096 bind 4096) [ 0.298499] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.298522] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.298692] NET: Registered protocol family 1 [ 14.046364] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 14.054754] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 14.054773] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 14.058269] Key type asymmetric registered [ 14.058285] Asymmetric key parser 'x509' registered [ 14.058316] io scheduler noop registered [ 14.058330] io scheduler deadline registered (default) [ 14.060542] 20000000.pci supply vdda not found, using dummy regulator [ 14.060589] 20000000.pci supply vdda_phy not found, using dummy regulator [ 14.060625] 20000000.pci supply vdda_refclk not found, using dummy regulator [ 14.061343] PCI host bridge /soc/pci@20000000 ranges: [ 14.061369] IO 0x20200000..0x2020ffff -> 0x20200000 [ 14.061384] MEM 0x20220000..0x2fffffff -> 0x20220000 [ 14.315767] qcom-pcie 20000000.pci: link up [ 14.315940] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [ 14.315955] pci_bus 0000:00: root bus resource [bus 00-ff] [ 14.315969] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x20200000-0x2020ffff]) [ 14.315979] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff] [ 14.316302] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 14.317281] pci 0000:00:00.0: BAR 8: assigned [mem 0x20300000-0x204fffff] [ 14.317296] pci 0000:00:00.0: BAR 9: assigned [mem 0x20500000-0x206fffff 64bit pref] [ 14.317309] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff 64bit] [ 14.317325] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 14.317341] pci 0000:01:00.0: BAR 0: assigned [mem 0x20300000-0x20300fff 64bit] [ 14.317392] pci 0000:01:00.0: BAR 2: assigned [mem 0x20301000-0x20301fff 64bit] [ 14.317440] pci 0000:00:00.0: PCI bridge to [bus 01] [ 14.317451] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 14.317462] pci 0000:00:00.0: bridge window [mem 0x20300000-0x204fffff] [ 14.317473] pci 0000:00:00.0: bridge window [mem 0x20500000-0x206fffff 64bit pref] [ 14.317964] [E][of_register_mhi_controller] mhi coherent pool is not reserved [ 14.318083] mhi 0000:01:00.0: BAR 0: assigned [mem 0x20300000-0x20300fff 64bit] [ 14.318150] mhi 0000:01:00.0: enabling device (0000 -> 0002) [ 14.319218] PCIe: RC0 enabled during bootup [ 14.323688] msm_rpm_log_probe: OK [ 14.324019] msm-dcc b3000.dcc: DCC XPU is not specified [ 14.324311] msm-dcc b3000.dcc: jiffies_64: 0xffff9068, cntvct_64: 0x2586ebb9 [ 14.324324] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff80005f8004) [ 14.324334] msm-dcc b3000.dcc: gcnt_lo: 0x2586ed99(0xffffff80005f8000) [ 14.324905] TZ SMMU State: SMMU Stage2 Enabled [ 14.324966] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set [ 14.326531] msm_serial 78b3000.serial: msm_serial: detected port #0 [ 14.326573] msm_serial 78b3000.serial: uartclk = 3686400 [ 14.326610] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 78, base_baud = 230400) is a MSM [ 14.326632] msm_serial: console setup on port #0 [ 14.561729] rmnet_ctl driver probed [ 15.193627] console [ttyMSM0] enabled [ 15.197164] msm_serial 78b1000.serial: msm_serial: detected port #1 [ 15.200698] msm_serial 78b1000.serial: uartclk = 19200000 [ 15.206783] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 79, base_baud = 1200000) is a MSM [ 15.212737] msm_serial: driver initialized [ 15.221145] msm_serial_hsl_init: driver initialized [ 15.263726] brd: module loaded [ 15.298165] loop: module loaded [ 15.298806] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 15.301568] m25p80 spi32766.0: found gd25lq32, expected n25q128a11 [ 15.307429] m25p80 spi32766.0: gd25lq32 (4096 Kbytes) [ 15.313437] 11 ofpart partitions found on MTD device spi32766.0 [ 15.318527] Creating 11 MTD partitions on "spi32766.0": [ 15.324256] 0x000000000000-0x000000040000 : "0:SBL1" [ 15.330113] 0x000000040000-0x000000050000 : "0:MIBIB" [ 15.345292] 0x000000050000-0x0000001b0000 : "0:QSEE" [ 15.345907] 0x0000001b0000-0x0000001c0000 : "0:DEVCFG" [ 15.359925] 0x0000001c0000-0x0000001e0000 : "0:RPM" [ 15.370564] 0x0000001e0000-0x0000001f0000 : "0:CDT" [ 15.371181] 0x0000001f0000-0x000000200000 : "0:APPSBLENV" [ 15.374894] 0x000000200000-0x0000002a0000 : "0:APPSBL" [ 15.380398] 0x0000002a0000-0x0000002e0000 : "0:ART" [ 15.385492] 0x0000002e0000-0x0000002f0000 : "0:OEM" [ 15.390208] 0x0000002f0000-0x000000310000 : "0:CRASH" [ 15.396091] libphy: Fixed MDIO Bus: probed [ 15.400281] qca-mdio 90000.mdio: Could not find phy-enable-0-85v [ 15.403678] qca-mdio 90000.mdio: Could not find phy-enable-1-2v [ 15.409868] qca-mdio 90000.mdio: Could not find phy-enable-2-1v [ 15.415497] qca-mdio 90000.mdio: Could not find phy-enable-1-8v [ 16.081675] libphy: qca_mdio: probed [ 16.082457] qca-mdio 90000.mdio: qca-mdio driver was registered [ 16.084530] Unable to create IPC log context! [ 16.090221] Skip QCA8074V1 in V2 platform [ 16.094745] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc0155d8018 tgt 0xfffe [ 16.098703] i2c /dev entries driver [ 16.154708] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 16.155204] sdhci: Secure Digital Host Controller Interface driver [ 16.162206] sdhci: Copyright(c) Pierre Ossman [ 16.168220] sdhci-pltfm: SDHCI platform and OF driver helper [ 16.173332] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 16.178431] ICE IRQ = 82 [ 16.186950] [ 16.186950] Version Rollback Feature Disabled [ 16.189717] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000008b04000 [ 16.194872] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000008b04000 [ 16.212136] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000008b04000 [ 16.228021] sps:BAM 0x0000000008b04000 is registered.[ 16.237172] remoteproc remoteproc0: releasing cd00000.qcom_q6v5_wcss [ 16.240867] SPMI VADC - Min ch: 0 Max ch: 15 [ 16.248440] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 [ 16.251011] coresight-csr 6001000.csr: CSR initialized [ 16.258473] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 [ 16.263410] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 [ 16.270967] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 [ 16.278345] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 [ 16.285723] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 [ 16.293085] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 [ 16.300480] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 [ 16.307867] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 [ 16.315230] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 [ 16.322601] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 [ 16.329992] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 [ 16.337372] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 [ 16.344748] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 [ 16.352112] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 [ 16.359512] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 [ 16.366890] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 [ 16.374267] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 [ 16.381631] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 [ 16.389030] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 [ 16.396415] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 [ 16.403779] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 [ 16.411339] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 [ 16.418400] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 [ 16.435485] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 [ 16.451372] sps:BAM 0x0000000006044000 is registered.[ 16.459172] coresight-tmc 6028000.tmc: TMC initialized [ 16.463835] coresight-tmc 6027000.tmc: TMC initialized [ 16.468987] coresight-funnel 6021000.funnel: FUNNEL initialized [ 16.473987] coresight-funnel 6100000.funnel: FUNNEL initialized [ 16.479832] coresight-funnel 6120000.funnel: FUNNEL initialized [ 16.485724] coresight-funnel 6130000.funnel: FUNNEL initialized [ 16.491629] coresight-funnel 61a1000.funnel: FUNNEL initialized [ 16.498060] coresight-etm4x 619c000.etm: ETM 4.0 initialized [ 16.503665] coresight-etm4x 619d000.etm: ETM 4.0 initialized [ 16.509569] coresight-etm4x 619e000.etm: ETM 4.0 initialized [ 16.515219] coresight-etm4x 619f000.etm: ETM 4.0 initialized [ 16.520638] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized [ 16.526398] coresight-stm 6002000.stm: STM initialized [ 16.534988] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 [ 16.538786] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized [ 16.549992] NET: Registered protocol family 10 [ 16.554908] fullmesh registered [ 16.558213] ndiffports registered [ 16.561257] binder registered [ 16.564744] roundrobin registered [ 16.567676] redundant registered [ 16.570974] NET: Registered protocol family 17 [ 16.574322] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 16.578566] Bridge firewalling registered [ 16.591306] 8021q: 802.1Q VLAN Support v1.8 [ 16.612251] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 16.612512] pmd9655_s3: supplied by e-smps1-reg [ 16.618540] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 16.622916] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 [ 16.629490] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 16.637149] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 16.644664] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 16.653780] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV [ 16.660742] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 808000 uV [ 16.670723] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 864000 uV [ 16.680613] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 944000 uV [ 16.690402] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 756, quot_offset[ 7]= 0 [ 16.700154] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 958, quot_offset[ 7]= 200 [ 16.711003] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1056, quot_offset[ 7]= 95 [ 16.721941] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1206, quot_offset[ 7]= 150 [ 16.733009] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 16.744399] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 [ 16.750688] pmd9655_s4: supplied by e-smps1-reg [ 16.757848] cpr3_mem_acc_init: npu: not using memory accelerator regulator [ 16.762113] npu_corner: fused NOM: open-loop= 760000 uV [ 16.769067] npu_corner: fused TURBO: open-loop= 824000 uV [ 16.774923] npu_corner: fused NOM: open-loop= 760000 uV [ 16.780510] npu_corner: fused TURBO: open-loop= 824000 uV [ 16.786187] npu_corner: Normal and Cold condition init done. Default to normal. [ 16.792776] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz [ 16.799010] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz [ 16.807374] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss [ 16.814910] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available [ 16.823534] hctosys: unable to open rtc device (rtc0) [ 16.835180] pmd9655_ldo11: disabling [ 16.835657] ALSA device list: [ 16.838750] No soundcards found. [ 16.849414] Freeing unused kernel memory: 18580K (ffffffc00085a000 - ffffffc001a7f000) [ 16.849458] Freeing alternatives memory: 44K (ffffffc001a7f000 - ffffffc001a8a000) [ 16.860598] init: Console is alive [ 16.863839] init: - watchdog - [ 16.876553] usbcore: registered new interface driver usbfs [ 16.876599] usbcore: registered new interface driver hub [ 16.881002] usbcore: registered new device driver usb [ 16.887443] Button Hotplug driver version 0.4.1 [ 16.893684] SCSI subsystem initialized [ 16.910380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 16.910667] ehci-platform: EHCI generic platform driver [ 16.922269] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy [ 16.929204] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout [ 16.929225] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868 [ 17.136108] msm-usb-ssphy-qmp 58000.ssphy: Initializing QMP phy [ 17.143708] msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout [ 17.143729] msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868 [ 17.351964] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 17.351999] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 17.356536] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 [ 17.363923] xhci-hcd xhci-hcd.0.auto: irq 193, io mem 0x08a00000 [ 17.372876] hub 1-0:1.0: USB hub found [ 17.378834] hub 1-0:1.0: 1 port detected [ 17.382524] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 17.386483] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 17.391781] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 17.399515] hub 2-0:1.0: USB hub found [ 17.407647] hub 2-0:1.0: 1 port detected [ 17.411340] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 17.415286] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 17.420699] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 [ 17.428157] xhci-hcd xhci-hcd.1.auto: irq 194, io mem 0x08c00000 [ 17.437013] hub 3-0:1.0: USB hub found [ 17.443058] hub 3-0:1.0: 1 port detected [ 17.446721] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 17.450697] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 17.456019] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 17.463736] hub 4-0:1.0: USB hub found [ 17.471882] hub 4-0:1.0: 1 port detected [ 17.477040] gpio_buttons initialized [ 17.479709] gpio-led init driver [ 17.483544] gpio_led_probe:gpio device register [ 17.486676] hw_version_init [ 17.490844] usb_protect initialized [ 17.493537] Init module OPANIC v2.0 [ 17.497840] usbcore: registered new interface driver usb-storage [ 17.501088] usbcore: registered new interface driver uas [ 17.867512] init: - preinit - Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 19.899386] procd: - early - [ 19.899428] procd: - watchdog - Sending udev events over mhi-uci[ 20.478687] procd: - ubus - [ 21.480238] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available) [ 21.494245] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available) [ 21.494275] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available) [ 21.504241] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available) [ 21.510945] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available) [ 21.519834] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available) [ 21.528683] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available) [ 21.537579] procd: - init - WIFI FW mount is successful [ 22.147058] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 22.150441] Initializing XFRM netlink socket [ 22.151691] NET: Registered protocol family 15 [ 22.163376] ssdk_switch_device_num_init[1159]:INFO:ess-switch dts node number: 1 [ 22.163437] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist! [ 22.169942] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: local bus [ 22.175921] ssdk_dt_parse_access_mode[869]:INFO:switchreg_base_addr: 0x3a000000 [ 22.183037] ssdk_dt_parse_access_mode[870]:INFO:switchreg_size: 0x1000000 [ 22.190171] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0x0 [ 22.197123] ssdk_dt_parse_mac_mode[304]:INFO:mac mode1 = 0xf [ 22.202470] ssdk_dt_parse_mac_mode[313]:INFO:mac mode2 = 0xf [ 22.208409] ssdk_dt_parse_phy_info[659]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT [ 22.214030] ssdk_dt_parse_phy_info[659]:INFO:[PORT 6] port_mac_sel = QGMAC_PORT [ 22.221101] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist! [ 22.228466] ssdk_dt_parse_intf_mac[801]:INFO:dp1 MAC 00:03:7f:ba:db:ad [ 22.234369] ssdk_plat_init start [ 22.316236] ssdk_gcc_clock_init[1011]:INFO:SSDK gcc clock init successfully! [ 22.316992] HPPE initializing... [ 22.322458] ssdk_phy_driver_init[328]:INFO:dev_id = 0, phy_adress = 2, phy_id = 0xffffffff phytype doesn't match [ 22.325661] ssdk_phy_driver_init[328]:INFO:dev_id = 0, phy_adress = 3, phy_id = 0xffffffff phytype doesn't match [ 22.335782] ssdk_phy_driver_init[328]:INFO:dev_id = 0, phy_adress = 24, phy_id = 0xffffffff phytype doesn't match [ 22.345921] ssdk_phy_driver_init[328]:INFO:dev_id = 0, phy_adress = 28, phy_id = 0xffffffff phytype doesn't match [ 22.356065] malibu_phy_api_ops_init[2875]:INFO:qca probe malibu phy driver succeeded! [ 22.367775] regi_init[3526]:INFO:Initializing HPPE!! [ 22.584219] ssdk_ppe_reset_init[1243]:INFO:ppe reset successfully! [ 22.587219] qca_hppe_tdm_hw_init[674]:INFO:tdm setup num=96 [ 22.589558] qca_hppe_portctrl_hw_init[105]:INFO:Hawkeye PPE port initializing [ 25.071277] ssdk_switch_register[1691]:INFO:Chip version 0x1500 [ 25.071310] qca_link_polling_select[1307]:INFO:link-polling-required node does not exist [ 25.075998] ssdk_switch_register[1717]:INFO:polling is selected [ 25.084327] regi_init[3530]:INFO:Initializing HPPE Done!! [ 25.090019] regi_init[3590]:INFO:qca-ssdk module init succeeded! [ 25.098991] tun: Universal TUN/TAP device driver, 1.6 [ 25.101594] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 25.108873] EDMA ver 1 hw init [ 25.112839] EDMA HW Reset completed succesfully [ 25.115760] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) [ 25.120084] RxDesc:1 (15-15) RxFill:1 (7-7) [ 25.126653] GMAC2(ffffffc001169880) Invalid MAC@ - using 7e:1d:91:66:32:3b [ 25.130379] GMAC3(ffffffc00116d880) Invalid MAC@ - using 3a:45:3c:2c:60:86 [ 25.136642] libphy: PHY 90000.mdio:02 not found [ 25.143300] nss-dp: probe of 3a001400.dp3 failed with error -14 [ 25.147835] GMAC4(ffffffc00116d880) Invalid MAC@ - using c6:95:f5:6a:eb:de [ 25.153696] libphy: PHY 90000.mdio:03 not found [ 25.160560] nss-dp: probe of 3a001600.dp4 failed with error -14 [ 25.165006] GMAC5(ffffffc00116d880) Invalid MAC@ - using ce:29:d7:59:4b:40 [ 25.170903] libphy: PHY 90000.mdio:18 not found [ 25.177824] nss-dp: probe of 3a001800.dp5 failed with error -14 [ 25.182260] GMAC6(ffffffc00116d880) Invalid MAC@ - using 42:5c:da:54:95:cc [ 25.188180] libphy: PHY 90000.mdio:1c not found [ 25.195097] nss-dp: probe of 3a001a00.dp6 failed with error -14 [ 25.199579] ********************************************************** [ 25.205428] * NSS Data Plane driver [ 25.212006] ********************************************************** [ 25.222203] l2tp_core: L2TP core driver, V2.0 [ 25.222984] l2tp_netlink: L2TP netlink interface [ 25.258280] qca-nss 39000000.nss: Direct firmware load for qca-nss0.bin failed with error -2 [ 25.258311] qca-nss 39000000.nss: Falling back to user helper /lib/firmware/qca-nss0.bin 33 [ 25.282572] nss_driver - fw of size 779896 bytes copied to load addr: 40000000, nss_id : 0 [ 25.284497] Supported Frequencies - [ 25.289717] 748.8 MHz 1.4976 GHz [ 25.295709] 1.6896 GHz [ 25.296744] [ 25.299130] ffffffbffc659d00: set sdma ffffffc0016dc800 [ 25.300650] ffffffbffc659d00: meminfo init succeed [ 25.323146] qca-nss 39400000.nss: Direct firmware load for qca-nss1.bin failed with error -2 [ 25.323177] qca-nss 39400000.nss: Falling back to user helper [ 25.337418] node size 2 # items 4 [ 25.337441] memory: 40000000 536870912 (avl 505061376) items 4 active_cores 2 [ 25.339712] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 [ 25.346843] ffffffbffc659d00: nss core 0 booted successfully /lib/firmware/qca-nss1.bin 33 [ 25.367223] nss_driver - fw of size 291644 bytes copied to load addr: 40800000, nss_id : 1 [ 25.368061] Supported Frequencies - [ 25.374424] 748.8 MHz 1.4976 GHz [ 25.380394] 1.6896 GHz [ 25.381395] [ 25.383794] ffffffbffc660c80: set sdma ffffffc0135f1e00 [ 25.385306] ffffffbffc660c80: meminfo init succeed [ 25.391852] sit: IPv6 over IPv4 tunneling driver [ 25.395082] node size 2 # items 4 [ 25.395085] memory: 40000000 536870912 (avl 505061376) items 4 active_cores 2 [ 25.395091] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 [ 25.395100] ffffffbffc660c80: nss core 1 booted successfully [ 25.419319] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded. [ 25.425124] gre: GRE over IPv4 demultiplexor driver [ 25.431521] ip_gre: GRE over IPv4 tunneling driver [ 25.436753] ip6_gre: GRE over IPv6 tunneling driver [ 25.442411] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 25.450233] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 25.454729] rmnet_nss_init(): initializing rmnet_nss [ 25.460028] nf_conntrack version 0.5.0 (3192 buckets, 12768 max) [ 25.468916] QCA Hy-Fi multicast installation successfully [ 25.475110] PPP generic driver version 2.4.2 [ 25.476925] nss_lag_init[352]:LAG Manager Installed [ 25.479691] NET: Registered protocol family 24 [ 25.484940] PPTP driver version 0.8.5 [ 25.491313] diag: IPC Logging disabled [ 25.491800] TRACK: P[0] PMask[4] [ 25.495027] TRACK: P[1] PMask[4] [ 25.498408] TRACK: P[2] PMask[4] [ 25.501679] TRACK: P[3] PMask[4] [ 25.504856] nik 4097 info->svc_id [ 25.530180] QCA multicast snooping installed successfully [ 25.531473] <NSS-CRYPTO>:module loaded Build_ID - 08/02/23, 18:31:36 SoC=ipq807x_64 [ 25.536322] nss-macsec0 DT exist! [ 25.542117] nss-macsec1 DT exist! [ 25.545594] cannot find nss-macsec2 node [ 25.548793] nss_macsec init success [ 25.568617] u32 classifier [ 25.568636] input device check on [ 25.570234] Actions configured [ 25.574855] Mirror/redirect action on [ 25.585339] fuse init (API version 7.23) [ 25.587714] arp_tables: (C) 2002 David S. Miller [ 25.595552] Ebtables v2.0 registered [ 25.596832] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.600816] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 25.699588] nf_conntrack_rtsp v0.6.21 loading [ 25.837147] nf_nat_rtsp v0.6.21 loading [ 25.840055] Netfilter messages via NETLINK v0.30. [ 25.842167] PPP MPPE Compression module registered [ 25.861323] xt_time: kernel timezone is -0000 [ 25.868436] ctnetlink v0.93: registering with nfnetlink. [ 26.100957] random: jshn: uninitialized urandom read (4 bytes read, 41 bits of entropy available) [ 26.103117] random: ubusd: uninitialized urandom read (4 bytes read, 41 bits of entropy available) [ 26.108933] random: ubus: uninitialized urandom read (4 bytes read, 42 bits of entropy available) acfg_tool: Issuing blocking call to wait for events [ 26.320441] ECM init [ 26.320496] ECM database jhash random seed: 0x1e5d8765 [ 26.322789] ECM init complete [ 26.714508] sh (1650): drop_caches: 3 **** Platform Name: ap-hk09 ***** Copy ART caldata from /dev/mtdblock8 to /tmp/virtual_art.bin qcawifi configuration is disable [ 27.026431] random: nonblocking pool is initialized [ 27.053948] main[3266] IPQCM:IPQCM Quitting!!! [ 27.229422] ECM exit [ 27.339646] DFC QMAP init [ 27.364868] Connection established with the WDA Service, DL Marker disabled [ 27.494651] ECM exit complete [ 27.642729] sh (2337): /proc/1972/oom_adj is deprecated, please use /proc/1972/oom_score_adj instead. [ 27.644099] [RMNET:HI] rmnet_vnd_create_dev(): NSS context for rmnet_data3 created [ 29.491438] device eth0 entered promiscuous mode [ 29.495352] device eth1 entered promiscuous mode [ 29.498125] bridge0: port 2(eth1) entered forwarding state [ 29.499758] bridge0: port 2(eth1) entered forwarding state [ 30.283411] mem_manager: module license 'Proprietary' taints kernel. [ 30.283438] Disabling lock debugging due to kernel taint [ 30.454301] bridge0: port 2(eth1) entered disabled state [ 30.525579] wlan: [3159:I:RPTR] qca_multi_link_init_module: [ 30.525579] ******QCA Repeater Initialization Done*********** [ 30.525579] [ 30.604699] wlan: [3171:I:ANY] =======ol_if_register_wifi3_0========== [ 30.604699] [ 30.604736] wlan: [3171:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd6289d8 [ 30.612031] wlan: [3171:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 [ 30.624171] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss [ 30.631796] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 30.760523] ECM init [ 30.760589] ECM database jhash random seed: 0x128026d5 [ 30.890799] ECM init complete [ 30.999878] Subsystem error monitoring/handling services are up [ 31.000251] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up [ 31.000651] rpmsg_dev_probe: No pm domain [ 31.000842] rpmsg_dev_probe: No pm domain [ 31.004406] cnss[2]: INFO: QMI WLFW service connected, state: 0x1 [ 31.011587] cnss[2]: INFO: device_id : 65534 mem mode : [1] [ 31.011632] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ807x/AP-HK09 [ 31.011632] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffc8a8248 [ 31.012692] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x0, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x240804a5, fw_build_timestamp: 2021-04-16 05:26, otp_version: 0x0 eeprom_caldata_read_timeout 0s [ 31.012702] cnss[2]: INFO: No board_id entry in device tree [ 31.012932] cnss[2]: INFO: BDF location : 0x4b0c0000 [ 31.012934] cnss[2]: INFO: BDF IPQ8074/bdwlan.bin size 131072 [ 31.013347] cnss[2]: INFO: per device BDF location : 0x4b0e0000 [ 31.013410] cnss[2]: INFO: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 [ 31.091212] wlan: [3171:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 [ 31.098825] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffe, FW ready timeout: 15 seconds [ 31.106632] cnss[2]: INFO: FW ready received for device 0xfffe [ 31.115712] wlan: [3171:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode [ 31.121252] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7 [ 31.138328] wlan: [3171:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4 [ 31.138643] wlan: [3171:I:ANY] __ol_ath_attach: Allocated soc ffffffc00ef80880 [ 31.146267] wlan: [3171:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully [ 31.153740] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_vdevs_pdev0=16 - Out of range [1, 9]; Using 9 [ 31.164096] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_vdevs_pdev1=16 - Out of range [1, 9]; Using 9 [ 31.173725] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_vdevs_pdev2=16 - Out of range [1, 9]; Using 9 [ 31.183353] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_peers_pdev0=512 - Out of range [1, 128]; Using 128 [ 31.193005] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_peers_pdev1=512 - Out of range [1, 128]; Using 128 [ 31.202979] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_peers_pdev2=512 - Out of range [1, 128]; Using 128 [ 31.213044] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_monitor_pdev0=1 - Out of range [0, 0]; Using 0 [ 31.223113] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_monitor_pdev1=1 - Out of range [0, 0]; Using 0 [ 31.232829] wlan: [3171:E:CONFIG] cfg_uint_item_handler: num_monitor_pdev2=1 - Out of range [0, 0]; Using 0 [ 31.242693] wlan: [3171:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 0 Target Type 18 [ 31.252303] wlan: [3171:I:ANY] __ol_ath_attach: dev name soc0 [ 31.261849] wlan: [3171:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle ffffffc012237000 [ 31.279818] wlan: [3171:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 31.279856] wlan: [3171:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 31.288763] wlan: [3171:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 31.298803] wlan: [3171:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 31.308873] wlan: [3171:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 31.318938] wlan: [3171:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 31.329005] wlan: [3171:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 31.339079] wlan: [3171:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 31.349178] wlan: [3171:I:ANY] htc_wmi_init: HT Create . ffffffc008191000 [ 31.359392] wlan: [3171:I:ANY] htc_wmi_init: Skipping BMI Done [ 31.366183] wlan: [3171:I:ANY] htc_wmi_init: host_enable 0 nss_nwifi_offload 0 [ 31.394446] wlan: [3171:I:ANY] ol_target_init_complete: CDP soc attach success [ 31.394478] wlan: [3171:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 [ 31.400663] wlan: [3171:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc008191000, ep 2, value 1 [ 31.408895] wlan: [3171:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc008191000, ep 3, value 1 [ 31.418712] wlan: [3171:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc008191000, ep 4, value 1 [ 31.429009] wlan: [1185:I:TIF] init_deinit_populate_hw_mode_capability: Preferred mode is not set, use mode id 1 [ 31.429009] [ 31.438538] wlan: [1185:I:TIF] HE_CAP Info = 9a18010d [ 31.450141] wlan: [1185:I:TIF] Num HW modes = 1 [ 31.455105] wlan: [1185:I:TIF] Num PHY = 2 [ 31.459424] wlan: [1185:I:TIF] FW Build Version (Ext.) = 0 [ 31.463575] wlan: [1185:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0 [ 31.470140] wlan: [1185:I:TIF] Preferred HW Mode = 1 Num Radios = 2 [ 31.476048] wlan: [1185:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 1 phy_id = 0 wireless modes = f97f9001 [ 31.482523] wlan: [1185:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 1 phy_id = 1 wireless modes = 680688c [ 31.493464] wlan: [1185:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success [ 31.504348] wlan: [1185:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success [ 31.509986] wlan: [1185:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 31.517116] wlan: [1185:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 31.524713] wlan: [1185:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 18 [ 31.532359] wlan: [1185:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 31.539896] wlan: [1185:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 31.547321] wlan: [1185:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 18 [ 31.555020] wlan: [1185:I:TIF] init_deinit_get_total_beaconing_vdevs_for_soc: beacon_tx_offload_max_vdev: 18 [ 31.562808] wlan: [1185:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 31.572739] wlan: [1185:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 31.580093] wlan: [1185:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 18 [ 31.588265] wlan: [1185:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 [ 31.595690] wlan: [1185:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 31.603128] wlan: [1185:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 [ 31.611095] wlan: [1185:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:ffffffc012237000 [ 31.619395] wlan: [1185:F:DP] dp_rx_enable_mon_dest_frag: Feature DP_RX_MON_MEM_FRAG for mon_dest is enabled [ 31.639764] wlan: [1185:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9 [ 31.639804] wlan: [1185:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 31.648572] wlan: [1185:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:1 wmi_handle:ffffffc014ecb800 [ 31.656969] wlan: [1185:F:DP] dp_rx_enable_mon_dest_frag: Feature DP_RX_MON_MEM_FRAG for mon_dest is enabled [ 31.674934] wlan: [1185:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 1 Number of peers = 137 vdevs = 9 [ 31.675399] wlan: [1185:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 31.785695] wlan: [1185:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 [ 31.905103] wlan: [1775:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 [ 31.905140] wlan: [1775:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 309, max_ast_index: 1040 [ 31.905140] [ 31.912709] wlan: [3171:I:ANY] ol_ath_connect_htc: WMI is ready [ 31.924790] wlan: [3171:I:ANY] ol_ath_soc_attach: connect HTC [ 31.943125] wlan: [3171:I:ANY] ol_ath_soc_attach: bypasswmi : 0 [ 31.943183] wlan: [3171:I:MSCS] qca_mscs_module_init: [ 31.943183] ****QCA MSCS Initialization Done**** SoC ffffffc00ef80880 [ 31.948189] wlan: [3171:I:ANY] ol_ath_soc_attach: UMAC attach [ 31.959785] wlan: [3171:I:ANY] __ol_ath_attach: pdev_netdev name wifi0 [ 31.965331] wlan: [3171:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target [ 31.971722] wlan: [3171:I:ANY] __ol_ath_attach: BURSTING enabled by default [ 31.979009] wlan: [3171:I:ANY] ol_ath_pdev_attach: interface_id 0 [ 31.985625] wlan: [3171:I:TIF] ol_ath_pdev_regdmn_init: phy id = 0 Modes supported [ 31.991861] wlan: [3171:I:TIF] ol_ath_pdev_regdmn_init: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 [ 31.999344] wlan: [3171:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4900, hi_5g = 5920 [ 32.009067] wlan: [3171:I:ANY] ol_ath_update_wireless_modes: wireless_modes = f97f9001 before update [ 32.023236] wlan: [3171:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = f97f9001 after update [ 32.032411] wlan: [3171:I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case [ 32.041260] wlan: [3171:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:e3:bf soc: soc0 pdev: wifi0 [ 32.048571] wlan: [3171:I:MBSSIE] ieee80211_mbss_attach: :> [ 32.060094] wlan: [3171:I:MBSSIE] ieee80211_mbss_attach: :< [ 32.065647] wlan: [3171:I:ANY] ol_resmgr_create: OL Resmgr Init-ed [ 32.071387] wlan: [3171:I:ANY] acfg_attach: acfg_attach: 3290: Netlink socket created:ffffffc014f3bc00 [ 32.077466] wlan: [3171:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 [ 32.087754] wlan: [3171:I:ANY] wlan_scan_update_channel_list: num_chan: 25 [ 32.093633] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[1], ptr:ffffffbffd2d8fe0 [ 32.100472] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(ffffffc0015a6008) Enabling DBDC Repeater 0 soc_lag ffffffc007debc80 [ 32.108377] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(ffffffc0015a6008) is_primary 0 [ 32.119682] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled [ 32.121383] wlan: [3171:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5 [ 32.121383] [ 32.121421] wlan: [3171:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty [ 32.121432] wlan: [3171:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 32768 [ 32.121446] wlan: [3171:I:ANY] osif_wrap_attach: osif wrap attached [ 32.121446] [ 32.121448] wlan: [3171:I:ANY] osif_wrap_devt_init: osif wrap dev table init done [ 32.121448] [ 32.121452] wlan: [3171:I:ANY] osif_wrap_attach: Wrap Attached: Wrap_com =ffffffc014f3b400 ic->ic_wrap_com=ffffffc014f3b400 &wrap_com->wc_devt=ffffffc014f3b400 [ 32.121452] [ 32.121475] wlan: [3171:I:ANY] __ol_ath_attach: needed_headroom reservation 60 [ 32.121692] wlan: [3171:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0xffffffc007f40880, wdev: 0xffffffc007f58ad0, wiphy: 0xffffffc014c632a0, netdev: 0xffffffc007f40000 [ 32.122379] wlan: [3171:I:ANY] __ol_ath_attach: pdev_netdev name wifi1 [ 32.122394] wlan: [3171:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target [ 32.122397] wlan: [3171:I:ANY] __ol_ath_attach: BURSTING enabled by default [ 32.122442] wlan: [3171:I:ANY] ol_ath_pdev_attach: interface_id 1 [ 32.122453] wlan: [3171:I:TIF] ol_ath_pdev_regdmn_init: phy id = 1 Modes supported [ 32.122457] wlan: [3171:I:TIF] ol_ath_pdev_regdmn_init: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 [ 32.122461] wlan: [3171:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 [ 32.122463] wlan: [3171:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update [ 32.122466] wlan: [3171:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update [ 32.122471] wlan: [3171:I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case [ 32.122499] wlan: [3171:I:ANY] ol_ath_pdev_regdmn_init: LDPC not supported in 5G HE CAP [ 32.122520] wlan: [3171:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:db:73 soc: soc0 pdev: wifi1 [ 32.122576] wlan: [3171:I:MBSSIE] ieee80211_mbss_attach: :> [ 32.122579] wlan: [3171:I:MBSSIE] ieee80211_mbss_attach: :< [ 32.122583] wlan: [3171:I:ANY] ol_resmgr_create: OL Resmgr Init-ed [ 32.122754] wlan: [3171:I:ANY] acfg_attach: Offload using existing sock ffffffc014f3bc00 [ 32.122760] wlan: [3171:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 [ 32.122943] wlan: [3171:I:ANY] wlan_scan_update_channel_list: num_chan: 11 [ 32.122972] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[2], ptr:ffffffbffd2d8fe0 [ 32.122978] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(ffffffc004f78008) Enabling DBDC Repeater 0 soc_lag ffffffc007debc80 [ 32.122982] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(ffffffc004f78008) is_primary 0 [ 32.125203] wlan: [3171:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 1, REO dest ring = 5 [ 32.125203] [ 32.125232] wlan: [3171:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty [ 32.125237] wlan: [3171:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 1 tx_desc_limit = 32768 [ 32.125253] wlan: [3171:I:ANY] osif_wrap_attach: osif wrap attached [ 32.125253] [ 32.125256] wlan: [3171:I:ANY] osif_wrap_devt_init: osif wrap dev table init done [ 32.125256] [ 32.125260] wlan: [3171:I:ANY] osif_wrap_attach: Wrap Attached: Wrap_com =ffffffc0044ea400 ic->ic_wrap_com=ffffffc0044ea400 &wrap_com->wc_devt=ffffffc0044ea400 [ 32.125260] [ 32.125282] wlan: [3171:I:ANY] __ol_ath_attach: needed_headroom reservation 60 [ 32.125298] wlan: [3171:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11 [ 32.125434] wlan: [3171:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0xffffffc007880880, wdev: 0xffffffc007898ad0, wiphy: 0xffffffc0044f22a0, netdev: 0xffffffc007880000 [ 32.126059] wlan: [3171:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 1 [ 32.126381] wlan: [3171:E:QLD] qld_register: Handle or address is NULL [ 32.126405] wlan: [3171:I:ANY] wlan_pdev_operation: num_radios=1, wifi_radios[0].sc = ffffffc007f40880_radio_type = 2 [ 32.126409] wlan: [3171:I:ANY] wlan_pdev_operation: num_radios=2, wifi_radios[1].sc = ffffffc007880880_radio_type = 2 [ 32.126435] wlan: [3171:I:ANY] init_ath_pci_3_0: 6ath_ol_pci_wifi3.0 : (Atheros/multi-bss) [ 32.148112] wlan: [3308:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffd6d1fd0 [ 32.148418] wlan: [3308:I:ANY] init_ath_pci_2_0: 6ath_ol_pci_2_0: (Atheros/multi-bss) [ 32.549865] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled [ 35.554348] nss-dp 3a001000.dp1 eth0: PHY Link up speed: 1000 [ 35.554527] bridge0: port 1(eth0) entered forwarding state [ 35.559113] bridge0: port 1(eth0) entered forwarding state [ 36.207376] wlan: [3840:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 0 bus_type 1 [ 36.207430] wlan: [3840:I:ANY] ol_ath_ahb_remove: Suspending Target - with disable_intr set :soc0 (sc ffffffc010288000) soc=ffffffc00ef80880 [ 36.214283] wlan: [3840:I:ANY] wlan_pdev_operation: disable_target_intr val is 1 [ 36.227313] wlan: [3840:I:ANY] wlan_pdev_operation: disable_target_intr val is 1 [ 36.234491] wlan: [3840:I:ANY] ol_ath_ahb_remove: waiting for target paused event from target :soc0 (sc ffffffc010288000) [ 36.241847] wlan: [3840:I:ANY] ol_ath_ahb_remove: AHB Call to nss detach [ 36.252723] wlan: [3840:I:ANY] ol_ath_ahb_remove: Call to nss detach ops 0000000000000000 [ 36.259476] wlan: [3840:E:QLD] qld_register: Handle or address is NULL [ 36.267658] wlan: [3840:I:ANY] osif_wrap_devt_detach: osif wrap dev table detached [ 36.267658] [ 36.274135] wlan: [3840:I:ANY] osif_wrap_detach: osif wrap detached [ 36.274135] [ 36.312168] wlan: [3840:E:CFR] tgt_cfr_deinit_pdev: Error occurred with exit code 16 [ 36.312168] [ 36.312204] wlan: [3840:E:CFR] cfr_deinitialize_pdev: cfr_deinitialize_pdev status=16 [ 36.312204] [ 36.320581] wlan: [3840:I:ANY] wlan_pdev_operation: soc_txrx_handle ffffffc00e804000 dp_pdev id 0 [ 36.329718] wlan: [3840:I:ANY] wlan_pdev_operation: soc_txrx_handle ffffffc00e804000 dp_pdev id 1 [ 36.338705] wlan: [3840:I:MBSSIE] ieee80211_mbss_detach: :> [ 36.347454] wlan: [3840:I:MBSSIE] ieee80211_mbss_detach: :< [ 36.352865] wlan: [3840:I:ANY] acfg_detach: acfg_detach Netlink socket released [ 36.358346] wlan: [3840:E:CFR] tgt_cfr_deinit_pdev: Error occurred with exit code 16 [ 36.358346] [ 36.365626] wlan: [3840:E:CFR] cfr_deinitialize_pdev: cfr_deinitialize_pdev status=16 [ 36.365626] [ 36.375050] wlan: [0:I:ANY] ol_ath_pdev_detach: remove global_ic[1]..gloabl_ic ptr:ffffffbffd2d8fe0 [ 36.384202] wlan: [3840:I:ANY] ieee80211_cfg80211_radio_detach: ieee80211_cfg80211_radio_detach: ic: 0xffffffc007f40880, wdev: 0xffffffc007f58ad0, netdev: 0xffffffc007f40000 [ 36.684338] PCIe: User of event deregistration is NULL [ 36.734373] wlan: [3840:E:QLD] qld_register: Handle or address is NULL [ 36.734513] wlan: [3840:I:ANY] osif_wrap_devt_detach: osif wrap dev table detached [ 36.734513] [ 36.739860] wlan: [3840:I:ANY] osif_wrap_detach: osif wrap detached [ 36.739860] [ 36.748858] wlan: [3840:E:CFR] tgt_cfr_deinit_pdev: Error occurred with exit code 16 [ 36.748858] [ 36.756765] wlan: [3840:E:CFR] cfr_deinitialize_pdev: cfr_deinitialize_pdev status=16 [ 36.756765] [ 36.765894] wlan: [3840:I:ANY] wlan_pdev_operation: soc_txrx_handle ffffffc00e804000 dp_pdev id 1 [ 36.775217] wlan: [3840:I:MBSSIE] ieee80211_mbss_detach: :> [ 36.784017] wlan: [3840:I:MBSSIE] ieee80211_mbss_detach: :< [ 36.789414] wlan: [3840:E:CFR] tgt_cfr_deinit_pdev: Error occurred with exit code 16 [ 36.789414] [ 36.795012] wlan: [3840:E:CFR] cfr_deinitialize_pdev: cfr_deinitialize_pdev status=16 [ 36.795012] [ 36.804401] wlan: [0:I:ANY] ol_ath_pdev_detach: remove global_ic[0]..gloabl_ic ptr:ffffffbffd2d8fe0 [ 36.813533] wlan: [3840:I:ANY] ieee80211_cfg80211_radio_detach: ieee80211_cfg80211_radio_detach: ic: 0xffffffc007880880, wdev: 0xffffffc007898ad0, netdev: 0xffffffc007880000 [ 36.964370] PCIe: User of event deregistration is NULL [ 37.054380] wlan: [3840:I:ANY] ol_ath_phyerr_detach: 6ol_ath_phyerr_detach: called [ 37.054421] wlan: [3840:E:WMI] wmi_unified_unregister_event_handler: Event id 55 is unavailable [ 37.060874] wlan: [3840:I:MSCS] qca_mscs_module_deinit: [ 37.060874] ****QCA MSCS De-Initialization Done**** SoC ffffffc00ef80880 [ 37.069947] wlan: [3840:E:WMI] wmi_unified_unregister_event_handler: Event id 141 is unavailable [ 37.081850] wlan: [3840:E:WMI] wmi_unified_unregister_event_handler: Event id 137 is unavailable [ 37.097467] cnss[2]: INFO: Sending mode message, mode: OFF(4), state: 0x7 [ 37.101605] wlan: [3840:I:ANY] 6ath_ahb_remove [ 37.101605] [ 37.106404] cnss[2]: INFO: QMI WLFW service disconnected, state: 0x6 [ 37.138255] remoteproc remoteproc0: stopped remote processor cd00000.qcom_q6v5_wcss [ 37.138320] wlan: [3840:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 1 bus_type 1 [ 37.407080] wlan: [3883:I:RPTR] qca_multi_link_deinit_module: [ 37.407080] ******QCA RPtr De-Init Done*********** [ 37.407080] [ 37.797437] configuring additional NSS pbufs [ 37.806793] additional pbufs of size 3100672 got added to NSS [ 37.980374] wlan: [3993:I:RPTR] qca_multi_link_init_module: [ 37.980374] ******QCA Repeater Initialization Done*********** [ 37.980374] [ 38.061117] wlan: [3998:I:ANY] =======ol_if_register_wifi3_0========== [ 38.061117] [ 38.061153] wlan: [3998:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffdcea9d8 [ 38.068276] wlan: [3998:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 [ 38.079843] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss [ 38.088196] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 38.453954] Subsystem error monitoring/handling services are up [ 38.454864] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up [ 38.455076] rpmsg_dev_probe: No pm domain [ 38.455791] rpmsg_dev_probe: No pm domain [ 38.461217] cnss[2]: INFO: QMI WLFW service connected, state: 0x1 [ 38.467211] cnss[2]: INFO: device_id : 65534 mem mode : [1] [ 38.468111] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ807x/AP-HK09 [ 38.468111] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x0, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x240804a5, fw_build_timestamp: 2021-04-16 05:26, otp_version: 0x0 eeprom_caldata_read_timeout 0s [ 38.468121] cnss[2]: INFO: No board_id entry in device tree [ 38.468564] cnss[2]: INFO: BDF location : 0x4b0c0000 [ 38.468567] cnss[2]: INFO: BDF IPQ8074/bdwlan.bin size 131072 [ 38.469138] cnss[2]: INFO: per device BDF location : 0x4b0e0000 [ 38.469184] cnss[2]: INFO: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 [ 38.535902] wlan: [3998:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 [ 38.543504] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffe, FW ready timeout: 15 seconds [ 38.552024] cnss[2]: INFO: FW ready received for device 0xfffe [ 38.560680] wlan: [3998:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode [ 38.566055] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7 [ 38.583139] wlan: [3998:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4 [ 38.583446] wlan: [3998:I:ANY] __ol_ath_attach: Allocated soc ffffffc00ed00880 [ 38.591267] wlan: [3998:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully [ 38.598729] wlan: [3998:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc [ 38.609008] wlan: [3998:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 18 [ 38.618335] wlan: [3998:I:ANY] __ol_ath_attach: dev name soc0 [ 38.627994] wlan: [3998:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle ffffffc0041e3400 [ 38.636739] wlan: [3998:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 38.642456] wlan: [3998:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 38.652024] wlan: [3998:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 38.661947] wlan: [3998:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 38.671986] wlan: [3998:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 38.682120] wlan: [3998:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 38.692140] wlan: [3998:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 38.702177] wlan: [3998:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 3 [ 38.712274] wlan: [3998:I:ANY] htc_wmi_init: HT Create . ffffffc004702000 [ 38.722311] wlan: [3998:I:ANY] htc_wmi_init: Skipping BMI Done [ 38.729242] wlan: [3998:I:ANY] htc_wmi_init: host_enable 0 nss_nwifi_offload 0 [ 38.741005] wlan: [3998:I:ANY] ol_target_init_complete: CDP soc attach success [ 38.742112] wlan: [3998:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 [ 38.749711] wlan: [3998:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc004702000, ep 2, value 1 [ 38.757916] wlan: [3998:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle ffffffc004702000, ep 3, value 1 [ 38.767904] wlan: [1775:I:TIF] HE_CAP Info = 9a18010d [ 38.777622] wlan: [1775:I:TIF] Num HW modes = 1 [ 38.782322] wlan: [1775:I:TIF] Num PHY = 2 [ 38.786774] wlan: [1775:I:TIF] FW Build Version (Ext.) = 0 [ 38.790841] wlan: [1775:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0 [ 38.796432] wlan: [1775:I:TIF] Preferred HW Mode = 1 Num Radios = 2 [ 38.803227] wlan: [1775:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 1 phy_id = 0 wireless modes = f97f9001 [ 38.809587] wlan: [1775:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 1 phy_id = 1 wireless modes = 680688c [ 38.820814] wlan: [1775:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success [ 38.830755] wlan: [1775:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success [ 38.836775] wlan: [1775:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 38.843893] wlan: [1775:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 38.851788] wlan: [1775:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 18 [ 38.859344] wlan: [1775:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 38.867127] wlan: [1775:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 38.874637] wlan: [1775:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 18 [ 38.882250] wlan: [1775:I:TIF] init_deinit_get_total_beaconing_vdevs_for_soc: beacon_tx_offload_max_vdev: 18 [ 38.890085] wlan: [1775:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 2 [ 38.900011] wlan: [1775:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 38.907387] wlan: [1775:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 18 [ 38.915056] wlan: [1775:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 [ 38.922865] wlan: [1775:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 [ 38.930359] wlan: [1775:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 [ 38.938061] wlan: [1775:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:ffffffc0041e3400 [ 38.946234] wlan: [1775:F:DP] dp_rx_enable_mon_dest_frag: Feature DP_RX_MON_MEM_FRAG for mon_dest is enabled [ 38.956177] wlan: [1775:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9 [ 38.965004] wlan: [1775:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 38.974662] wlan: [1775:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:1 wmi_handle:ffffffc01cd38000 [ 38.982591] wlan: [1775:F:DP] dp_rx_enable_mon_dest_frag: Feature DP_RX_MON_MEM_FRAG for mon_dest is enabled [ 38.992695] wlan: [1775:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 1 Number of peers = 137 vdevs = 9 [ 39.001583] wlan: [1775:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success [ 39.111480] wlan: [1775:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 [ 39.230544] wlan: [1775:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 [ 39.230580] wlan: [1775:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 309, max_ast_index: 1040 [ 39.230580] [ 39.238174] wlan: [3998:I:ANY] ol_ath_connect_htc: WMI is ready [ 39.265301] wlan: [3998:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d [ 39.265334] wlan: [3998:E:NSS] [nss-wifili]: pdev:ffffffc00dc20880 radio_ifnum:29 scheme_id:0 radio_priority:1 [ 39.277727] wlan: [3998:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL [ 39.283306] wlan: [3998:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d [ 39.290875] wlan: [3998:E:NSS] [nss-wifili]: pdev:ffffffc0080a0880 radio_ifnum:30 scheme_id:1 radio_priority:0 [ 39.304102] wlan: [3998:E:TIF] target_if_lro_hash_config: pdev with id 1 is NULL [ 39.310030] wlan: [3998:I:ANY] ol_ath_soc_attach: connect HTC [ 39.317337] wlan: [3998:I:ANY] ol_ath_soc_attach: bypasswmi : 0 [ 39.322986] wlan: [3998:I:MSCS] qca_mscs_module_init: [ 39.322986] ****QCA MSCS Initialization Done**** SoC ffffffc00ed00880 [ 39.328717] wlan: [3998:I:ANY] ol_ath_soc_attach: UMAC attach [ 39.340577] wlan: [3998:I:ANY] __ol_ath_attach: pdev_netdev name wifi0 [ 39.346219] wlan: [3998:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target [ 39.352571] wlan: [3998:I:ANY] __ol_ath_attach: BURSTING enabled by default [ 39.359847] wlan: [3998:I:ANY] ol_ath_pdev_attach: interface_id 0 [ 39.366472] wlan: [3998:I:TIF] ol_ath_pdev_regdmn_init: phy id = 0 Modes supported [ 39.372712] wlan: [3998:I:TIF] ol_ath_pdev_regdmn_init: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 [ 39.380188] wlan: [3998:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4900, hi_5g = 5920 [ 39.389917] wlan: [3998:I:ANY] ol_ath_update_wireless_modes: wireless_modes = f97f9001 before update [ 39.404057] wlan: [3998:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = f97f9001 after update [ 39.413268] wlan: [3998:I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case [ 39.422104] wlan: [3998:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:d2:e7 soc: soc0 pdev: wifi0 [ 39.429404] wlan: [3998:I:MBSSIE] ieee80211_mbss_attach: :> [ 39.440943] wlan: [3998:I:MBSSIE] ieee80211_mbss_attach: :< [ 39.446499] wlan: [3998:I:ANY] ol_resmgr_create: OL Resmgr Init-ed [ 39.452233] wlan: [3998:I:ANY] acfg_attach: acfg_attach: 3290: Netlink socket created:ffffffc012446800 [ 39.458371] wlan: [3998:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 [ 39.468680] wlan: [3998:I:ANY] wlan_scan_update_channel_list: num_chan: 25 [ 39.474543] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[1], ptr:ffffffbffda10fe0 [ 39.481313] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(ffffffc01cd3a808) Enabling DBDC Repeater 0 soc_lag ffffffc013368c80 [ 39.489266] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(ffffffc01cd3a808) is_primary 0 [ 39.489328] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 39.508902] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled [ 39.510880] wlan: [3998:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5 [ 39.510880] [ 39.510911] wlan: [3998:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty [ 39.510925] wlan: [3998:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 8192 [ 39.510943] wlan: [3998:I:ANY] osif_wrap_attach: osif wrap attached [ 39.510943] [ 39.510945] wlan: [3998:I:ANY] osif_wrap_devt_init: osif wrap dev table init done [ 39.510945] [ 39.510949] wlan: [3998:I:ANY] osif_wrap_attach: Wrap Attached: Wrap_com =ffffffc0126d6c00 ic->ic_wrap_com=ffffffc0126d6c00 &wrap_com->wc_devt=ffffffc0126d6c00 [ 39.510949] [ 39.510975] wlan: [3998:I:ANY] __ol_ath_attach: needed_headroom reservation 60 [ 39.510978] wlan: [3998:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41 [ 39.511196] wlan: [3998:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0xffffffc00dc20880, wdev: 0xffffffc00dc38ad0, wiphy: 0xffffffc0058882a0, netdev: 0xffffffc00dc20000 [ 39.511881] wlan: [3998:I:ANY] __ol_ath_attach: pdev_netdev name wifi1 [ 39.511896] wlan: [3998:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target [ 39.511900] wlan: [3998:I:ANY] __ol_ath_attach: BURSTING enabled by default [ 39.511943] wlan: [3998:I:ANY] ol_ath_pdev_attach: interface_id 1 [ 39.511954] wlan: [3998:I:TIF] ol_ath_pdev_regdmn_init: phy id = 1 Modes supported [ 39.511957] wlan: [3998:I:TIF] ol_ath_pdev_regdmn_init: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 [ 39.511961] wlan: [3998:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 [ 39.511964] wlan: [3998:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update [ 39.511966] wlan: [3998:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update [ 39.511971] wlan: [3998:I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case [ 39.511999] wlan: [3998:I:ANY] ol_ath_pdev_regdmn_init: LDPC not supported in 5G HE CAP [ 39.512022] wlan: [3998:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:86:ec soc: soc0 pdev: wifi1 [ 39.512080] wlan: [3998:I:MBSSIE] ieee80211_mbss_attach: :> [ 39.512082] wlan: [3998:I:MBSSIE] ieee80211_mbss_attach: :< [ 39.512086] wlan: [3998:I:ANY] ol_resmgr_create: OL Resmgr Init-ed [ 39.512250] wlan: [3998:I:ANY] acfg_attach: Offload using existing sock ffffffc012446800 [ 39.512257] wlan: [3998:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 [ 39.512439] wlan: [3998:I:ANY] wlan_scan_update_channel_list: num_chan: 11 [ 39.512465] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[2], ptr:ffffffbffda10fe0 [ 39.512470] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(ffffffc01d4dac08) Enabling DBDC Repeater 0 soc_lag ffffffc013368c80 [ 39.512499] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(ffffffc01d4dac08) is_primary 0 [ 39.514724] wlan: [3998:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 1, REO dest ring = 5 [ 39.514724] [ 39.514754] wlan: [3998:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty [ 39.514759] wlan: [3998:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 1 tx_desc_limit = 8192 [ 39.514776] wlan: [3998:I:ANY] osif_wrap_attach: osif wrap attached [ 39.514776] [ 39.514778] wlan: [3998:I:ANY] osif_wrap_devt_init: osif wrap dev table init done [ 39.514778] [ 39.514782] wlan: [3998:I:ANY] osif_wrap_attach: Wrap Attached: Wrap_com =ffffffc014ecb800 ic->ic_wrap_com=ffffffc014ecb800 &wrap_com->wc_devt=ffffffc014ecb800 [ 39.514782] [ 39.514805] wlan: [3998:I:ANY] __ol_ath_attach: needed_headroom reservation 60 [ 39.514808] wlan: [3998:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi1 features 41 [ 39.514825] wlan: [3998:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11 [ 39.514962] wlan: [3998:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0xffffffc0080a0880, wdev: 0xffffffc0080b8ad0, wiphy: 0xffffffc00588baa0, netdev: 0xffffffc0080a0000 [ 39.515603] wlan: [3998:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 1 [ 39.515943] wlan: [3998:E:QLD] qld_register: Handle or address is NULL [ 39.515966] wlan: [3998:I:ANY] wlan_pdev_operation: num_radios=1, wifi_radios[0].sc = ffffffc00dc20880_radio_type = 2 [ 39.515970] wlan: [3998:I:ANY] wlan_pdev_operation: num_radios=2, wifi_radios[1].sc = ffffffc0080a0880_radio_type = 2 [ 39.515996] wlan: [3998:I:ANY] init_ath_pci_3_0: 6ath_ol_pci_wifi3.0 : (Atheros/multi-bss) [ 39.937611] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed [ 39.946597] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled [ 39.983602] wlan: [4019:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffdd84fd0 [ 39.984018] wlan: [4019:I:ANY] init_ath_pci_2_0: 6ath_ol_pci_2_0: (Atheros/multi-bss) [ 40.760018] wlan: [4106:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :10:71:fa:69:f0:59 ret: 0 [ 40.777899] wlan: [4110:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :10:71:fa:69:f0:58 ret: 0 [ 40.982621] wlan: [4165:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :10:71:fa:69:f0:59 ret: -16 [ 40.999405] wlan: [4168:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0 [ 41.052189] wlan: [0:I:ANY] ol_ath_set_config_param: Disconnect_timeout value: 10 [ 41.069865] wlan: [0:I:ANY] ol_ath_set_config_param: Reconfiguration_timeout value:60 [ 41.117727] wlan: [4200:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: ath0 : clone params: 0x00000001 [ 41.117793] wlan: [4200:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES [ 41.128544] wlan: [4200:I:ANY] osifp_create_wlan_vap: VDEV Create 10:71:fa:69:f0:59 [ 41.135898] wlan: [4200:I:ANY] wlan_vap_create: devhandle=0xffffffc00dc20880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 41.135898] [ 41.143660] wlan: [4200:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 41.155283] wlan: [4200:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 [ 41.162088] wlan: [4200:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x7b [ 41.176609] wlan: [4200:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 41.182774] wlan: [4200:I:ANY] MBO Initialized [ 41.196723] wlan: [4200:I:ANY] OCE Initialized [ 41.200885] wlan: [4200:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 31 nss_id -1 [ 41.205292] wlan: [4200:I:ANY] NSS radio_if 29 [ 41.214539] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 [ 41.218743] wlan: [4200:I:ANY] osif_nss_ol_vap_create: vap create ffffffc00dc18880 : if_num 31 [ 41.226728] wlan: [4200:F:DP] dp_vdev_register_tx_handler: Configure tx_vdev_id_chk_handler Feature Flag: 0 and mode:1 for vdev_id:0 [ 41.235170] wlan: [4200:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd [ 41.264238] wlan: [4200:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 41.264264] wlan: [4200:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 41.272551] wlan: [4200:I:ANY] VAP device ath0 created osifp: (ffffffc00dc18880) os_if: (ffffffc001768000) [ 41.552490] wlan: [4255:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: ath01 : clone params: 0x00000001 [ 41.552555] wlan: [4255:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES [ 41.563233] wlan: [4255:I:ANY] osifp_create_wlan_vap: VDEV Create 16:71:fa:69:f0:59 [ 41.570785] wlan: [4255:I:ANY] wlan_vap_create: devhandle=0xffffffc00dc20880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 41.570785] [ 41.578517] wlan: [4255:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 41.590074] wlan: [4255:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 [ 41.597009] wlan: [4255:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x7b [ 41.611523] wlan: [4255:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 41.617644] wlan: [4255:I:ANY] MBO Initialized [ 41.631525] wlan: [4255:I:ANY] OCE Initialized [ 41.635777] wlan: [4255:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 32 nss_id -1 [ 41.640181] wlan: [4255:I:ANY] NSS radio_if 29 [ 41.649278] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 [ 41.653605] wlan: [4255:I:ANY] osif_nss_ol_vap_create: vap create ffffffc00ef06880 : if_num 32 [ 41.661549] wlan: [4255:F:DP] dp_vdev_register_tx_handler: Configure tx_vdev_id_chk_handler Feature Flag: 0 and mode:1 for vdev_id:1 [ 41.670034] wlan: [4255:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd [ 41.694246] wlan: [4255:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 41.694276] wlan: [4255:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 41.702703] wlan: [4255:I:ANY] VAP device ath01 created osifp: (ffffffc00ef06880) os_if: (ffffffc00ebf8000) [ 42.077197] wlan: [4331:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :10:71:fa:69:f0:58 ret: -16 [ 42.093913] wlan: [4334:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0 [ 42.143941] wlan: [0:I:ANY] ol_ath_set_config_param: Disconnect_timeout value: 10 [ 42.160849] wlan: [0:I:ANY] ol_ath_set_config_param: Reconfiguration_timeout value:60 [ 42.206806] wlan: [4365:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: ath1 : clone params: 0x00000001 [ 42.206872] wlan: [4365:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES [ 42.217502] wlan: [4365:I:ANY] osifp_create_wlan_vap: VDEV Create 10:71:fa:69:f0:58 [ 42.224961] wlan: [4365:I:ANY] wlan_vap_create: devhandle=0xffffffc0080a0880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 42.224961] [ 42.232643] wlan: [4365:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 42.244327] wlan: [4365:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 [ 42.251137] wlan: [4365:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x7b [ 42.265632] wlan: [4365:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 42.271835] wlan: [4365:I:ANY] MBO Initialized [ 42.285674] wlan: [4365:I:ANY] OCE Initialized [ 42.289927] wlan: [4365:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 33 nss_id -1 [ 42.294374] wlan: [4365:I:ANY] NSS radio_if 30 [ 42.303388] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 [ 42.307808] wlan: [4365:I:ANY] osif_nss_ol_vap_create: vap create ffffffc010a6a880 : if_num 33 [ 42.315729] wlan: [4365:F:DP] dp_vdev_register_tx_handler: Configure tx_vdev_id_chk_handler Feature Flag: 0 and mode:1 for vdev_id:2 [ 42.324238] wlan: [4365:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd [ 42.354273] wlan: [4365:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 42.354306] wlan: [4365:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 42.362092] wlan: [4365:I:ANY] VAP device ath1 created osifp: (ffffffc010a6a880) os_if: (ffffffc01192c000) [ 42.616210] wlan: [4405:W:ANY] wlan_get_wlan_band_id_chan_to_freq: Invalid freq: 0, wlan_band: 0, reg_wifi_band: 3, chan: 12 [ 42.616249] wlan: [4405:F:ANY] ieee80211dbg_ioctl_acs_block_channel: ieee80211dbg_ioctl_acs_block_channel Invalid input chan: 12, band: 0 [ 42.616249] [ 42.656393] wlan: [4425:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: ath11 : clone params: 0x00000001 [ 42.656456] wlan: [4425:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES [ 42.667485] wlan: [4425:I:ANY] osifp_create_wlan_vap: VDEV Create 16:71:fa:69:f0:58 [ 42.674876] wlan: [4425:I:ANY] wlan_vap_create: devhandle=0xffffffc0080a0880, opmode=IEEE80211_M_HOSTAP, flags=0x1 [ 42.674876] [ 42.683091] wlan: [4425:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 42.694329] wlan: [4425:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 [ 42.700822] wlan: [4425:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x7b [ 42.715308] wlan: [4425:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged [ 42.721515] wlan: [4425:I:ANY] MBO Initialized [ 42.735498] wlan: [4425:I:ANY] OCE Initialized [ 42.739608] wlan: [4425:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 34 nss_id -1 [ 42.744026] wlan: [4425:I:ANY] NSS radio_if 30 [ 42.753096] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 [ 42.757485] wlan: [4425:I:ANY] osif_nss_ol_vap_create: vap create ffffffc010a46880 : if_num 34 [ 42.765434] wlan: [4425:F:DP] dp_vdev_register_tx_handler: Configure tx_vdev_id_chk_handler Feature Flag: 0 and mode:1 for vdev_id:3 [ 42.773898] wlan: [4425:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd [ 42.804257] wlan: [4425:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 [ 42.804289] wlan: [4425:I:ANY] WLAN-NSS: VAP NSS ops initialized [ 42.812080] wlan: [4425:I:ANY] VAP device ath11 created osifp: (ffffffc010a46880) os_if: (ffffffc00ebd0000) [ 43.064895] wlan: [4465:W:ANY] wlan_get_wlan_band_id_chan_to_freq: Invalid freq: 0, wlan_band: 0, reg_wifi_band: 3, chan: 12 [ 43.064935] wlan: [4465:F:ANY] ieee80211dbg_ioctl_acs_block_channel: ieee80211dbg_ioctl_acs_block_channel Invalid input chan: 12, band: 0 [ 43.064935] [ 43.179772] wlan: [4498:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 43.180884] wlan: [4498:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 43.185798] wlan: [4498:I:ANY] ieee80211_setctry_tryretaining_curchan: [431] Skipping current channel retention during set_country operation [ 43.192452] wlan: [4498:I:ANY] number of channels: 2G = 0 5G = 19, 6G = 0 [ 43.226590] wlan: [4501:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 43.227062] wlan: [4501:I:ANY] number of channels: 2G = 0 5G = 19, 6G = 0 [ 43.233045] wlan: [4501:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 43.261132] wlan: [4504:I:ANY] wlan_scan_update_channel_list: num_chan: 20 [ 43.261261] wlan: [4504:I:ANY] number of channels: 2G = 0 5G = 20, 6G = 0 [ 44.353411] wlan: [4534:I:ANY] wlan_scan_update_channel_list: num_chan: 19 [ 44.353543] wlan: [4534:I:ANY] number of channels: 2G = 0 5G = 19, 6G = 0 [ 44.388910] wlan: [0:D:dfs] WLAN_DEBUG_DFS_AGILE : dfs_agile_sm_print_state_event: [DFS_AGILE]INIT, EV_AGILE_STOP [ 44.388951] wlan: [0:D:dfs] WLAN_DEBUG_DFS_AGILE : dfs_agile_sm_print_state_event: [DFS_AGILE]INIT, EV_AGILE_START [ 44.398177] wlan: [0:I:ANY] dfs_set_agilecac_chan_for_freq: Cannot start Agile CAC as a valid agile channel width could not be found [ 44.398177] [ 44.447414] wlan: [4549:I:ANY] wlan_scan_update_channel_list: num_chan: 13 [ 44.447503] wlan: [4549:I:ANY] ieee80211_setctry_tryretaining_curchan: [431] Skipping current channel retention during set_country operation [ 44.453204] wlan: [4549:I:ANY] number of channels: 2G = 13 5G = 0, 6G = 0 [ 44.634583] wlan: [4586:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 44.865550] wlan: [4621:E:ANY] ieee80211_ucfg_setparam: Invalid value [ 44.896984] 8021q: adding VLAN 0 to HW filter on device ath0 [ 44.944764] wlan: [1455:I:ANY] wlan_cfg80211_do_acs: vap-0(ath0):ACS Params [ 44.944793] wlan: [1455:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:31|chwidth:20| [ 44.950611] wlan: [1455:I:ANY] ieee80211_autoselect_infra_bss_channel: ACS started: vap:0xffffffc001768000 [ 44.962971] wlan: [1455:I:ANY] ACS channel list: [ 44.971039] wlan: [1455:I:ANY] [36] <---> [5180] [ 44.975688] wlan: [1455:I:ANY] [40] <---> [5200] [ 44.980306] wlan: [1455:I:ANY] [44] <---> [5220] [ 44.985008] wlan: [1455:I:ANY] [48] <---> [5240] [ 44.989513] wlan: [1455:I:ANY] [52] <---> [5260] [ 44.994104] wlan: [1455:I:ANY] [56] <---> [5280] [ 44.998841] wlan: [1455:I:ANY] [60] <---> [5300] [ 45.003307] wlan: [1455:I:ANY] [64] <---> [5320] [ 45.008011] wlan: [1455:I:ANY] [100] <---> [5500] [ 45.012509] wlan: [1455:I:ANY] [104] <---> [5520] [ 45.017206] wlan: [1455:I:ANY] [108] <---> [5540] [ 45.021806] wlan: [1455:I:ANY] [112] <---> [5560] [ 45.026613] wlan: [1455:I:ANY] [116] <---> [5580] [ 45.031174] wlan: [1455:I:ANY] [120] <---> [5600] [ 45.035957] wlan: [1455:I:ANY] [124] <---> [5620] [ 45.040547] wlan: [1455:I:ANY] [128] <---> [5640] [ 45.097083] device ath0 entered promiscuous mode [ 45.097404] bridge0: port 3(ath0) entered forwarding state [ 45.100817] bridge0: port 3(ath0) entered forwarding state [ 45.172087] wlan: [4665:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 [ 45.438745] 8021q: adding VLAN 0 to HW filter on device ath1 [ 45.504783] wlan: [1455:I:ANY] wlan_cfg80211_do_acs: vap-2(ath1):ACS Params [ 45.504817] wlan: [1455:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:29|chwidth:20| [ 45.510562] wlan: [1455:I:ANY] ieee80211_autoselect_infra_bss_channel: ACS started: vap:0xffffffc01192c000 [ 45.521392] wlan: [1455:I:ANY] ACS channel list: [ 45.530894] wlan: [1455:I:ANY] [1] <---> [2412] [ 45.535642] wlan: [1455:I:ANY] [2] <---> [2417] [ 45.539977] wlan: [1455:I:ANY] [3] <---> [2422] [ 45.544498] wlan: [1455:I:ANY] [4] <---> [2427] [ 45.549005] wlan: [1455:I:ANY] [5] <---> [2432] [ 45.553517] wlan: [1455:I:ANY] [5] <---> [2432] [ 45.558039] wlan: [1455:I:ANY] [6] <---> [2437] [ 45.562551] wlan: [1455:I:ANY] [6] <---> [2437] [ 45.567067] wlan: [1455:I:ANY] [7] <---> [2442] [ 45.571574] wlan: [1455:I:ANY] [7] <---> [2442] [ 45.576106] wlan: [1455:I:ANY] [8] <---> [2447] [ 45.580602] wlan: [1455:I:ANY] [8] <---> [2447] [ 45.585124] wlan: [1455:I:ANY] [9] <---> [2452] [ 45.589635] wlan: [1455:I:ANY] [9] <---> [2452] [ 45.594143] wlan: [1455:I:ANY] [10] <---> [2457] [ 45.598663] wlan: [1455:I:ANY] [11] <---> [2462] [ 45.821425] wlan: [4765:I:ANY] ol_ath_ucfg_setparam: set acs_nf_threshold to -85 [ 45.821425] [ 45.827942] wlan: [4767:I:ANY] ol_ath_ucfg_setparam: set acs_nf_threshold to -85 [ 45.827942] [ 46.185847] device ath1 entered promiscuous mode [ 46.186093] bridge0: port 4(ath1) entered forwarding state [ 46.189546] bridge0: port 4(ath1) entered forwarding state [ 49.613784] wlan: [3995:I:ANY] vap-2(ath1): ACS result PCH 2 freq 2417, SCH 6 freq 2437, hw_mode 1 chwidth 40, vht_seg0 4 freq 2427, vht_seg1 0 freq 0 [ 49.613843] wlan: [3995:I:ANY] ieee80211_acs_scan_evhandler: lock held duration: 0(ms) [ 49.638794] wlan: [1455:I:ANY] DES SSID SET=1071FA69F05B-2G [ 49.638821] wlan: [1455:I:ANY] desired hw mode: 29 [ 49.643270] wlan: [1455:I:ANY] ieee80211_ucfg_set_freq_internal: [ 49.643270] Channel is configured already!! [ 49.648413] wlan: [1455:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled [ 49.659595] wlan: [1455:I:ANY] [ASSOC] vap-2(ath1):ieee80211_try_mark_node_for_delayed_cleanup: ni: 0xffffffc00ebda000, mac: 10:71:fa:69:f0:58, marked:0, vapid: 2 [ 49.659595] [ 49.667585] wlan: [1455:I:ANY] [ASSOC] vap-2(ath1):ieee80211_try_mark_node_for_delayed_cleanup: ni: 0xffffffc00ebda000, mac: 10:71:fa:69:f0:58, marked:0, vapid: 2 [ 49.667585] [ 49.819570] wlan: [0:I:ANY] [ASSOC] vap-2(ath1):ieee80211_mlme_frame_complete_handler: frame 192 send to ff:ff:ff:ff:ff:ff, delayed_clean: 0, leve_ongoing: 0 [ 49.819570] [ 49.820497] wlan: [0:I:ANY] [ASSOC] vap-2(ath1):ieee80211_mlme_frame_complete_handler: frame 192 send to ff:ff:ff:ff:ff:ff, delayed_clean: 0, leve_ongoing: 0 [ 49.820497] [ 50.564240] bridge0: port 1(eth0) entered forwarding state -------------------------------------------------------------------- ---------------------------Welcome To Cli--------------------------- --SBAir5, CKB01_11.B.003_293_202308021758, 10:71:FA:69:F0:5B-- -------------------------------------------------------------------- Login: [ 50.940528] wlan: [3995:I:ANY] vap-0(ath0): ACS result PCH 128 freq 5640, SCH 108 freq 5540, hw_mode 2 chwidth 160, vht_seg0 114 freq 5570, vht_seg1 0 freq 0 [ 50.940589] wlan: [3995:I:ANY] ieee80211_acs_scan_evhandler: lock held duration: 0(ms) [ 50.963307] wlan: [1455:I:ANY] DES SSID SET=1071FA69F05B-5G [ 50.963335] wlan: [1455:I:ANY] desired hw mode: 31 [ 50.967952] wlan: [1455:I:ANY] ieee80211_ucfg_set_freq_internal: [ 50.967952] Channel is configured already!! [ 50.972694] wlan: [1455:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled [ 50.983182] wlan: [0:D:dfs] WLAN_DEBUG_DFS_AGILE : dfs_agile_sm_print_state_event: [DFS_AGILE]INIT, EV_AGILE_STOP [ 50.990938] wlan: [1455:I:ANY] [ASSOC] vap-0(ath0):ieee80211_try_mark_node_for_delayed_cleanup: ni: 0xffffffc00ea11000, mac: 10:71:fa:69:f0:59, marked:0, vapid: 0 [ 50.990938] [ 51.002127] wlan: [1455:I:ANY] [ASSOC] vap-0(ath0):ieee80211_try_mark_node_for_delayed_cleanup: ni: 0xffffffc00ea11000, mac: 10:71:fa:69:f0:59, marked:0, vapid: 0 [ 51.002127] [ 51.017591] wlan: [0:D:dfs] WLAN_DEBUG_DFS_AGILE : dfs_agile_sm_print_state_event: [DFS_AGILE]INIT, EV_AGILE_START [ 51.032471] wlan: [0:I:ANY] dfs_set_agilecac_chan_for_freq: Cannot start Agile CAC as a valid agile channel width could not be found [ 51.032471] Mode Switch:LTE Only mode attached flag = <FALSE> [ 53.179922] wlan: [0:I:ANY] [ASSOC] vap-0(ath0):ieee80211_mlme_frame_complete_handler: frame 192 send to ff:ff:ff:ff:ff:ff, delayed_clean: 0, leve_ongoing: 0 [ 53.179922] [ 53.180018] wlan: [0:I:ANY] [ASSOC] vap-0(ath0):ieee80211_mlme_frame_complete_handler: frame 192 send to ff:ff:ff:ff:ff:ff, delayed_clean: 0, leve_ongoing: 0 [ 53.180018] Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 1 [ 60.124225] bridge0: port 3(ath0) entered forwarding state [ 61.204225] bridge0: port 4(ath1) entered forwarding state Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 2 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 3 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 4 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 5 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 6 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 7 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 8 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 9 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:attach retry 10 Mode Switch:Mode <LTE Only> Attach Fail Mode Switch:RSRP Check Start Mode Switch:5G RSRP check count 1.<-119>,<-110> Mode Switch:Current RSRP check count 1.<->,<-128> Mode Switch:wait 1 minute(s) Mode Switch:Current RSRP check count 2.<->,<-128> Mode Switch:wait 1 minute(s)
